Hostname: page-component-78c5997874-4rdpn Total loading time: 0 Render date: 2024-11-03T02:13:46.322Z Has data issue: false hasContentIssue false

The Application of Nano-Structured Silica Based Admixture in Gypsum Binders

Published online by Cambridge University Press:  30 July 2014

E.V. Voitovich
Affiliation:
The Belgorod State Technological University named after V.G. Shoukhov, Belgorod, Russia
A.V. Cherevatova
Affiliation:
The Belgorod State Technological University named after V.G. Shoukhov, Belgorod, Russia
I.V. Zhernovsky
Affiliation:
The Belgorod State Technological University named after V.G. Shoukhov, Belgorod, Russia
H.-B. Fisher
Affiliation:
University of Weimar Bauhaus, Weimar, Germany
K. Sobolev
Affiliation:
Department of Civil Engineering and Mechanics, University of Wisconsin-Milwaukee, Milwaukee, USA
Get access

Abstract

This article reports on a new composite gypsum binder (CGB) with nanostructured silica-based admixture (NSS). NSS is obtained by a wet ultrafine milling of quartz sand resulting in the formation of an inorganic polydisperse binding system, which has a high concentration of active nanoscale phase (about 10%). Developed CGB contains hemihydrate gypsum and nano-component based on quartz sand. It is observed that the addition of 15–20 % of NSS improves the rheological properties of gypsum systems through the formation of solvate shells hindering the access of water to gypsum particles; this process also retards the setting of binder.

The experimental program used infrared IR spectroscopy, X-ray diffraction (XRD) and scanning electron microscopy (SEM) to reveal the contribution of NSS. The porosity of CGB is analyzed by the kinetics of water adsorption and BET. The XRD and IR investigations determined the formation of a new sulfosilicate phase, hydroxyellestadite during the hydration of CGB. With the addition of NSS an overall reduction in pore volume, as well as the shifts in macro-, meso- and nano- porosity values are observed.

Analysis of CGB microstructure reveals that in the presence of the NSS the size and morphology of crystals are changed contributing to the formation of dense fine-grained structure. Experimental studies have demonstrated that the composite gypsum binders with NSS are characterized by reduced water absorption and increased density, as well as improved mechanical performance especially, higher compressive strength.

Type
Articles
Copyright
Copyright © Materials Research Society 2014 

Access options

Get access to the full version of this content by using one of the access options below. (Log in options will check for institutional or personal access. Content may require purchase if you do not have access.)

References

REFERENCES

Arikan, M., Sobolev, K., Cement Concrete Res. 32 (11), 17251728 (2002).CrossRefGoogle Scholar
Cherevatova, A.V., Zhernovsky, I.V., Strokova, V.V., Mineral nanostructured binders: Characterization, technology and application, (LAP LAMBERT Academic Publishing GmbH & Co. KG Dudweiler Landstr. Saarbucken, Germany, 2007) 170 p.Google Scholar
Voitovich, E.V., Zhernovsky, I.V., Cherevatova, A.V., Dry Building Mixes 3, 1819 (2011), in Russian Google Scholar
Cherevatova, A., Strokova, V., Zhernovsky, I., Pavlenko, N., Nelubova, V., Sobolev, K., The development of nanostrured SiO2 binders for application in cellular concrete, (NICOM 4: 4th International Symposium on Nanotechnology in Construction, Greece, 2012).Google Scholar
Zhernovsky, I., Strokova, V., Koshukhova, N., Sobolev, K., The use of mechano-activation for nanostructuring of quartz materials, (NICOM 4: 4th International Symposium on Nanotechnology in Construction, Greece, 2012).Google Scholar
Solovyov, L.A., J Appl Crystallogr. 37, 743749 (2004).CrossRefGoogle Scholar
Rouse, C.R., Am. Miner. 67, 9096 (1982).Google Scholar