Hostname: page-component-cd9895bd7-p9bg8 Total loading time: 0 Render date: 2024-12-27T02:09:49.889Z Has data issue: false hasContentIssue false
  • English
  • Français

The Application of Chemical Mechanical Polishing for Nickel Used in MEMS Devices

Published online by Cambridge University Press:  15 March 2011

Arun Vijayakumar ,
Tianbao Du ,
Kalpathy B. Sundaram  and
Vimal Desai
Arun Vijayakumar
Affiliation:
Advanced Materials Processing and Analysis Center University of Central Florida Orlando, FL 32816-2455
Tianbao Du
Affiliation:
Advanced Materials Processing and Analysis Center University of Central Florida Orlando, FL 32816-2455
Kalpathy B. Sundaram
Affiliation:
Advanced Materials Processing and Analysis Center University of Central Florida Orlando, FL 32816-2455
Vimal Desai
Affiliation:
Advanced Materials Processing and Analysis Center University of Central Florida Orlando, FL 32816-2455
Get access

Abstract

Chemical mechanical planarization (CMP) has found extensive application in the fabrication of micro-electro-mechanical systems (MEMS). Nickel and Nickel based alloys are known to possess favorable properties that make them promising candidates to realize movable structures for MEMS applications. The development of CMP slurry chemistry for Ni that provides good CMP performance is the key in enabling CMP technology for Nickel based MEMS device fabrication. Unfortunately, very little work has been reported in terms of the electrochemical interaction of Ni with various CMP slurry constituents such as oxidizers, complexants and inhibitors. In this study, CMP of nickel was performed using H2O2 as oxidizer and alumina particles as abrasives. Electrochemical techniques were used to investigate the dissolution/passivation behavior of high-purity Ni under static and dynamic conditions in slurries at pH 4 with the addition of oxidizer, complexing agent and nickel salt. The affected surface layers of the statically etched Ni-disc were investigated using X-ray photoelectron spectroscopy (XPS). The Ni removal rate increased with the addition of oxidizer and further increased with the addition of complexing agent and nickel salt. The electrochemical results indicate that the surface chemistry and electrochemical characteristic of Ni play an important role in controlling the polishing behavior.

Type
Research Article
Information
MRS Online Proceedings Library (OPL) , Volume 816: Symposium K – Advances in Chemical-Mechanical Polishing , 2004 , K7.5
Copyright
Copyright © Materials Research Society 2004

Access options

Get access to the full version of this content by using one of the access options below. (Log in options will check for institutional or personal access. Content may require purchase if you do not have access.)

References

1. Hu, C. K., Luther, B., Kaufman, F. B., Humnel, J., Uzoh, C., and Pearson, D. J., Thin Solid Films, 262 (1995) 84.Google Scholar
2. Kourouklis, C., Kohlmeier, T. and Gatzen, H. H., Sensors and Actuator A, 106 (2003) 263.Google Scholar
3. Stein, D. J., Hetherington, D., Guilinger, T. and Cecchi, J. L., J. Electroche,. Soc., 145 (1998) 3190.Google Scholar
4. Steigerwald, J. M., Murarka, S. P., Gutmamn, R. J. and Duquette, D. J., J. Electrochem. Soc., 141 (1994) 3512.Google Scholar
5. Du, T. and Desai, V., Microelectron. Eng., 69 (2003) 1.Google Scholar
6. Aksu, S. and Doyle, F. M., J. Electrochem. Soc., 149 (2002) G352.Google Scholar
7. Du, T., Luo, Y. and Desai, V., Microelectron. Eng., 71 (2004) 90.Google Scholar
8. Du, T., Tamboli, D., Luo, Y. and Desai, V., Applied Surface Science, 229 (2004) 167.Google Scholar
9. Ein-Eli, Y., Abelev, E. and Starosvetsky, D., J. Electrochem. Soc., 151 (2004) G236.Google Scholar
10. Kaufman, K. B., Thompson, D. B., Broadie, R. E., Jaso, M. A., Guthrie, W. L., Pearson, D. J. and Small, M. B., J. Electrochem. Soc., 138 (1991) 3460.Google Scholar
11. Du, T., Tamboli, D., Desai, V. and Seal, S., J. Electrochem. Soc., 151 (2004) G230.Google Scholar
12. Diegle, R. B., Sorensen, N. R., Clayton, C. R., Helfand, M. A. and Yu, Y. C., J. Electrochem. Soc., 135 (1988) 1085.Google Scholar
13. Bastidas, J. M., Polo, J. L., Cano, E. and Torres, C. L., J. Mater. Sci., 35 (2000) 2637.Google Scholar
14. Du, T., Chen, J. and Cao, D., J. Mater. Sci., 36 (2001) 3903.Google Scholar