Hostname: page-component-586b7cd67f-2brh9 Total loading time: 0 Render date: 2024-11-29T07:27:52.579Z Has data issue: false hasContentIssue false
  • English
  • Français

Anhydride/Epoxy Functionalized Blends: Mechanical, Rheological and Thermal Properties

Published online by Cambridge University Press:  14 March 2011

Goknur Bayram  and
Ulku Yilmazer
Goknur Bayram
Affiliation:
Middle East Technical University, Chemical Engineering Department, 06531, Ankara, TURKEY
Ulku Yilmazer
Affiliation:
Middle East Technical University, Chemical Engineering Department, 06531, Ankara, TURKEY
Get access

Abstract

Blends of styrene-maleic anhydride (SMAH) and polyethylene-methyl acrylate-glycidyl methacrylate (E-MA-GMA) were produced in a batch mixer and in a corotating twin screw extruder. E-MA-GMA concentration was varied from 0 % to 50 %. Batch mixing indicated that the blend system was reactive. Extruded blends were characterized in terms of rheological, thermal and mechanical properties, and their morphology was observed. Rheological properties such as the storage modulus, loss modulus and complex viscosity exhibited maxima at 25 % EMA-GMA content. The blends had fine morphology as observed by scanning electron microscopy. Thermal properties were not significantly affected by the change in epoxy concentration. As E-MA-GMA concentration increased, tensile strength and modulus of elasticity decreased, but percent strain at break increased. These observations could be explained in terms of the chain extension / branching reactions that occurred in mixing the blends.

Type
Research Article
Information
MRS Online Proceedings Library (OPL) , Volume 702: Symposium U – Advanced Fibers, Plastics, Laminates and Composites , 2001 , U9.7.1
Copyright
Copyright © Materials Research Society 2002

Access options

Get access to the full version of this content by using one of the access options below. (Log in options will check for institutional or personal access. Content may require purchase if you do not have access.)

References

REFERENCES

[1] Xanthos, M., Ed. Reactive Extrusion-Principles and Practice, (Carl Hanser Verlag, Munich, 1992).Google Scholar
[2] Hert, M., Die Angewandte Makromoleculare Chemie, 196, 89–99 (1992).Google Scholar
[3] Dagli, S.S. and Kamdar, K.M., Polym.Eng.Sci., 34, 1709–1719 (1994).Google Scholar
[4] Turati, E., Vitale, A., Gallazi, M., Seves, A., and Testa, G., Adv. Polym. Tech., 17, 1–11 (1998).Google Scholar
[5] Jo, W.H., Park, C.D. and Lee, M.S., Polymer, 37, 1709–1714 (1996).Google Scholar
[6] Hu, G.H. and Lindt, J.T., J. Appl. Polym. Sci.: Part A:Polym. Chem., 31, 691–700 (1993).Google Scholar
[7] Nakajima, N. and Harrell, E.R., in Rheology and Polymer Processing Multiphase Systems, edited by Ottenbrite, R.M., Utracki, L.A., Inoue, S.L., (Hanser, New York, 1987), p. 166.Google Scholar
[8] Ramkumar, D.H.S. and Bhattacharya, M., Polym.Eng.Sci., 38, 1426–1435 (1998).Google Scholar
[9] Vermeesch, I. and Groeninckx, G., J.Appl.Polym.Sci., 53, 1365–1373 (1994).Google Scholar
[10] Bayram, G., Yilmazer, U., Xanthos, M., J.Appl. Polym. Sci., 80, 790–797 (2001).Google Scholar