Hostname: page-component-586b7cd67f-rcrh6 Total loading time: 0 Render date: 2024-11-25T15:37:06.631Z Has data issue: false hasContentIssue false
  • English
  • Français

An Electrodeless Melter for Vitrification of Nuclear Waste

Published online by Cambridge University Press:  03 September 2012

J. P. Freidberg ,
A. J. Shajii ,
K. W. Wenzel  and
J. R. Lierzer
J. P. Freidberg
Affiliation:
MIT Nuclear Engineering Department and Plasma Science and Fusion Center, NW16, 77 Massachusetts Avenue, Cambridge, MA 02139USA, [email protected]
A. J. Shajii
Affiliation:
MIT Nuclear Engineering Department and Plasma Science and Fusion Center, NW16, 77 Massachusetts Avenue, Cambridge, MA 02139USA, [email protected]
K. W. Wenzel
Affiliation:
MIT Nuclear Engineering Department and Plasma Science and Fusion Center, NW16, 77 Massachusetts Avenue, Cambridge, MA 02139USA, [email protected]
J. R. Lierzer
Affiliation:
MIT Nuclear Engineering Department and Plasma Science and Fusion Center, NW16, 77 Massachusetts Avenue, Cambridge, MA 02139USA, [email protected]
Get access

Abstract

This paper describes a new concept for a high-temperature, electrodeless melter for vitrifying radioactive wastes. Based on the principles of induction heating, it circumvents a number of difficulties associated with existing technology. The melter can operate at higher temperatures (1500–2000°C vs 1150°C), allowing for a higher quality, more durable glass which reduces the long-term leaching rate. Higher processing temperatures also enable conversion from borosilicate to high-silica glass which can accommodate 2 to 3 times as much radioactive waste, potentially halving the ultimate required long-term disposal space. Finally, with high temperatures, conversion of nuclear waste into ceramics can also be considered. This too leads to higher waste loading and the reduction of repository space. The melter is toroidal, linked by an iron core transformer that allows efficient electrical operation even at 60 Hz. One-dimensional electrical and thermal analyses are presented.

Type
Research Article
Information
MRS Online Proceedings Library (OPL) , Volume 465: Symposium II – Scienfific Basis for Nuclear Waste Management XX , 1996 , 33
Copyright
Copyright © Materials Research Society 1997

Access options

Get access to the full version of this content by using one of the access options below. (Log in options will check for institutional or personal access. Content may require purchase if you do not have access.)

References

REFERENCES

1. Murray, R. L., Understanding Radioactive Waste, Battelle Press, Columbus, OH (1994).Google Scholar
2. Estimating the Cold War Mortgage, U.S. Department of Energy Office of Environmental Management 1995. Baseline Report (1995).Google Scholar
3. Cunnane, J. C. and Allison, J. M., “High Level Waste Glass Compendium; What it Tells Us Concerning the Durability of Borosilicate Waste Glass”, Mat. Res. Soc. Symp. Proc. Vol. 333 3 (1994).10.1557/PROC-333-3Google Scholar
4. Lutze, W. and Ewing, R. C. Radioactive Waste Forms for the Future, North-Holland, Amsterdam (1988).Google Scholar
5. Sobolev, I. A., Lifanov, F. A., Dmitriyev, S. A., et ai, “Vitrifciation of Radioactive Wastes by Coreless Induction Melting in Cold Crucible”, Intl. Nuclear and Hazardous Waste Mgmt. Conf., Atlanta (1994).Google Scholar
6. Jouan, A., Moncouyoux, J.-P., Merlin, S., and Roux, P., “Multiple Applications of Cold-Crucible Melting”, Radwaste Magazine, 3 #2, p. 81 (1996).Google Scholar