Hostname: page-component-586b7cd67f-rdxmf Total loading time: 0 Render date: 2024-11-29T07:23:20.320Z Has data issue: false hasContentIssue false
  • English
  • Français

An Approach towards the Printing of Polymer Circuits

Published online by Cambridge University Press:  11 February 2011

Alexander Knobloch ,
Adolf Bernds  and
Wolfgang Clemens
Alexander Knobloch
Affiliation:
Siemens Corporate Technology, Paul-Gossen-Str. 100, D-91052 Erlangen, Germany
Adolf Bernds
Affiliation:
Siemens Corporate Technology, Paul-Gossen-Str. 100, D-91052 Erlangen, Germany
Wolfgang Clemens
Affiliation:
Siemens Corporate Technology, Paul-Gossen-Str. 100, D-91052 Erlangen, Germany
Get access

Abstract

The combination of soluble polymers with printing and coating techniques enabled the fabrication of polymer field-effect transistors (PFETs) on flexible films. The devices were built in a top gate configuration, with four functional layers deposited. The electrodes were patterned by gravure offset printing, where source-drain were made from conducting polyanilin and carbon black filled conducting ink was used as gate material. The doctor blading technique was utilized for coating low viscosity solutions, where Poly(3-alkyllthiophene) served as active semiconductor material. Thus completely printed PFETs have been demonstrated. Further steps for printing integrated polymer circuits included the fabrication of inverters combined from two printed. Screen-printing could be used as an alternative to coating and has the potential to enable vertical electrical interconnects between top and bottom layer of circuits. To test the suitability insulating layers were screen-printed homogenously onto lithographically patterned electrodes made from gold. The PFETs' yield was sufficient enough to let a 7-stage ring oscillator work with a clock frequency of 4 Hz.

Type
Research Article
Information
MRS Online Proceedings Library (OPL) , Volume 736: Symposium D – Electronics on Unconventional Substrates–Electrotextiles and Giant-Area Flexible Circuits , 2002 , D6.3
Copyright
Copyright © Materials Research Society 2003

Access options

Get access to the full version of this content by using one of the access options below. (Log in options will check for institutional or personal access. Content may require purchase if you do not have access.)

References

REFERENCES

Horowitz, G., Adv. Mat. 10, 365 (1998).Google Scholar
2. Drury, C. J., Mutsaers, C. M., Hart, C. M., Matters, M., de Leeuw, D. M., Apl. Phys. Lett., 73, 108 (1998).Google Scholar
3. Fix, W., Ullmann, A., Ficker, J., Clemens, W., Apl. Phys. Lett., 81 (9), 1735 (2002).Google Scholar
4. Garnier, F., Hajlaoui, R., Yassar, A. and Srivastava, P., Science 265, 1684 (1994).Google Scholar
5. Rogers, J.A., Bao, Z., Makhija, A. and Braun, P., Adv. Mat. 11 (9), 741 (1999).Google Scholar
6. Granlund, T., Nyberg, T., Roman, L.S., Svensson, M. and Inganäs, O., Adv. Mat., 12 (4), 269 (2000).Google Scholar
7. Sirringhaus, H., Kawase, T., Friend, R.H., Shimoda, T., Inbasekaran, M., Wu, W. and Woo, E.P., Science 290, 2123 (1997).Google Scholar
8. Bao, Z., Raju, V.R., Feng, Y., Dodabalapur, A., Lovinger, A.J. and Katz, H.E., Polym. Mater. 77, 409 (1997).Google Scholar
9. Chen, M., Nilsson, D., Kugler, T., Berggren, M., Remonen, T., Apl. Phys. Lett., 81 (11), 2011 (2002)Google Scholar
10. Nilsson, D., Chen, M., Kugler, T., Remonen, T., Armgarth, M., Berggren, M., Adv. Mat., 14 (1), 51 (2002)Google Scholar
11. Knobloch, A., Bernds, A. and Clemens, W., Proc. Polytronic, 84 (2001).Google Scholar
12. Manuelli, A., Knobloch, A., Bernds, A., Clemens, W., Proc. Polytronic, (2002).Google Scholar
13. Ficker, J., Ullmann, A., Fix, W., Rost, H., Clemens, W., Proc. of the SPIE, 4466 (2001).Google Scholar