Hostname: page-component-78c5997874-s2hrs Total loading time: 0 Render date: 2024-11-07T20:16:15.334Z Has data issue: false hasContentIssue false

Amorphous Silicon Alloy Solar Cells Near the Threshold of Amorphous-to-Microcrystalline Transition

Published online by Cambridge University Press:  17 March 2011

Jeffrey Yang
Affiliation:
United Solar Systems Corp., 1100 West Maple Road, Troy, MI 48084
Kenneth Lord
Affiliation:
United Solar Systems Corp., 1100 West Maple Road, Troy, MI 48084
Subhendu Guha
Affiliation:
United Solar Systems Corp., 1100 West Maple Road, Troy, MI 48084
S.R. Ovshinsky
Affiliation:
United Solar Systems Corp., 1100 West Maple Road, Troy, MI 48084
Get access

Abstract

A systematic study has been made of amorphous silicon (a-Si) alloy solar cells using various hydrogen dilutions during the growth of the intrinsic (i) layer. We find that the open-circuit voltage (Voc) of the cells increases as the dilution increases; it then reaches a maximum before it decreases dramatically. This sudden drop in Voc is attributed to the transition from amorphous silicon to microcrystalline inclusions in the i layer. We study i-layer thicknesses ranging from 1000 Å to 5000 Å and find that the transition occurs in all thicknesses investigated. Based on this study, a-Si alloy p i n solar cells suitable for use in the top cell of a high efficiency triple-junction structure are made. By selecting an appropriate dilution, cells with Voc greater than 1 V can be achieved readily. Solar cells made near the threshold not only exhibit higher initial characteristics but also better stability against light soaking. We have compared top cells made near the threshold with our previous best data, and found that both the initial and stable efficiencies are superior for the near-threshold cells. For an a-Si/a-Si double-junction device, a Voc value exceeding 2 V has been obtained using thin component cells. Thicker component cells give rise to an initial active-area efficiency of 11.9% for this tandem structure.

Type
Research Article
Copyright
Copyright © Materials Research Society 1999

Access options

Get access to the full version of this content by using one of the access options below. (Log in options will check for institutional or personal access. Content may require purchase if you do not have access.)

References

REFERENCES

1. Guha, S., Narasimhan, K.L., and Pietruszko, S.M., J. Appl. Phys. 52, 859 (1981).Google Scholar
2. Yang, J., Xu, X., and Guha, S., Mater. Res. Soc. Symp. Proc. 336, 687 (1994).Google Scholar
3. Yang, L. and Chen, L.F., Mater. Res. Soc. Symp. Proc. 336, 669 (1994).Google Scholar
4. Xu, X., Yang, J., and Guha, S., J. Non-Cryst. Solids 198–200, 96 (1996).Google Scholar
5. Rech, B., Wieder, S., Siebke, F., Beneking, C., and Wagner, H., Mater. Res. Soc. Symp. Proc. 420, 33 (1996).Google Scholar
6. Platz, R., Wagner, S., Hof, C., Shah, A., Wieder, S., and Rech, B., J. Appl. Phys., 84, 3949 (1998).Google Scholar
7. Yang, J., Banerjee, A., and Guha, S., Appl. Phys. Lett. 70, 2975 (1997).Google Scholar
8. Tsu, D.V., Chao, B.S., Ovshinsky, S.R., Guha, S., and Yang, J., Appl. Phys. Lett. 71, 1317 (1997).Google Scholar
9. Guha, S., Yang, J., Williamson, D.L., Lubianiker, Y., Cohen, J.D., and Mahan, A.H., Appl. Phys. Lett. 74, 1860 (1999).Google Scholar
10. Koh, J., Lee, Y., Fujiwara, H., Wronski, C.R., and Collins, R.W., Appl. Phys. Lett. 73, 1526 (1998).Google Scholar
11. Koh, J., Ferulato, A.S., Rovira, P.I., Wronski, C.R., and Collins, R.W., Appl. Phys. Lett., 75, 2286 (1999).Google Scholar
12. Kamei, T., Stradius, P., and Matsuda, A., Appl. Phys. Lett. 74, 1707 (1999).Google Scholar
13. Williamson, D.L., Mater. Res. Soc. Symp. Proc. 557, 251 (1999).Google Scholar
14. Mahan, A.H., Yang, J., Guha, S., and Williamson, D.L., Phys. Rev. B 61, 1677 (2000).Google Scholar