Hostname: page-component-586b7cd67f-l7hp2 Total loading time: 0 Render date: 2024-11-29T09:50:43.147Z Has data issue: false hasContentIssue false
  • English
  • Français

Alternative Cavity Design for Microwave Joining of Long Ceramic Tubes

Published online by Cambridge University Press:  15 February 2011

Hussamaldin S. Sa'adaldin ,
W. Murray Black ,
Iftikhar Ahmad ,
Yong-Lai Tian  and
Richard Silberglitt
Hussamaldin S. Sa'adaldin
Affiliation:
Department of Electrical and Computer Engineering, George Mason University, Fairfax, VA
W. Murray Black
Affiliation:
Department of Electrical and Computer Engineering, George Mason University, Fairfax, VA
Iftikhar Ahmad
Affiliation:
Department of Electrical and Computer Engineering, George Mason University, Fairfax, VA
Yong-Lai Tian
Affiliation:
Department of Electrical and Computer Engineering, George Mason University, Fairfax, VA
Richard Silberglitt
Affiliation:
FM Technologies Inc., Fairfax, VA.
Get access

Abstract

A new single mode applicator has been designed and fabricated to provide effective and nearly uniform heating of long ceramic tubes or rods at 2.45 GHz. The applicator is made of two double mitered waveguide corners. A comparison between the new cavity and a rectangular cavity has been carried out to heat various ceramic samples. Results show a significant improvement in the heating rate as well as the reduction of the power needed to attain a given temperature. This paper describes the preliminary test results of the new cavity and the potential to achieve joining of long tubes or rods.

Type
Research Article
Information
MRS Online Proceedings Library (OPL) , Volume 347: Symposium O – Microwave Processing of Materials IV , 1994 , 649
Copyright
Copyright © Materials Research Society 1994

Access options

Get access to the full version of this content by using one of the access options below. (Log in options will check for institutional or personal access. Content may require purchase if you do not have access.)

References

REFERENCES

[1] Palaith, D. and Silberglitt, R., Ceramic Bulletin, Vol. 68 (9), p. 1601, 1989.Google Scholar
[2] Sa'adaldin, H.S., Black, W.M., Tian, Y., Ahmad, I., and Silberglitt, R., Ceramic Transactions, Microwaves: Theory and Application in Materials Processing, Vol. 36, p. 359, 1993.Google Scholar
[3] Ragan, G.L., Microwave Transmission Circuit, New York: McGraw-Hill, p. 203, 1948.Google Scholar
[4] Fukushima, H., Yamanaka, T., and Matsui, M., [Measurement of Dielectric Properties of Ceramics at Microwave Frequency], J. of Japan Society of Precision Engineering, Vol. 53, No. 5, May 1987.Google Scholar