Hostname: page-component-586b7cd67f-2brh9 Total loading time: 0 Render date: 2024-11-27T00:39:26.353Z Has data issue: false hasContentIssue false

Alteration and dissolution of Na-montmorillonite in simulated groundwaters

Published online by Cambridge University Press:  27 March 2012

E. Myllykylä
Affiliation:
VTT Technical Research Centre of Finland, P.O.Box 1000, 02044 Espoo, FINLAND
M. Tanhua-Tyrkkö
Affiliation:
VTT Technical Research Centre of Finland, P.O.Box 1000, 02044 Espoo, FINLAND
A. Bouchet
Affiliation:
Etudes Recherches Matériaux ERM, Centre Régional d’Innovation du Biopôle, 4 rue Carol Heitz, 86000 Poitiers, FRANCE
Get access

Abstract

This study aims at gaining a better understanding of the behaviour of montmorillonite in contact with different ground waters; alteration of montmorillonite and possible formation of secondary minerals. Batch experiments were conducted with purified Swy-2 montmorillonite in simulated fresh (I=0.05 M, pH 8) and saline (I=0.1 M, pH 11) waters at 25 and 60ºC in anaerobic (Ar(g)) conditions. The concentrations of Al, Fe; Mg and Si were analysed from ultra-filtered solution samples with HR-ICP-MS (High Resolution Inductively Coupled Plasma Mass Spectrometry). The amount of released Si depended strongly on the experimental conditions. The Si concentrations at 60oC in the saline and fresh waters showed a difference greater than an order of magnitude. The initial purified montmorillonite and the solid materials from experiments were analysed with XRD. The analysis indicated that the nature of smectite did not change, but the experimental conditions, more or less, modified the structure of montmorillonite, e.g., in fresh waters the XRD spectra showed peaks typical of mixed layer minerals, which can refer to the presence of either randomly ordered illite/smectite or randomly ordered collapsed smectite/ hydrated smectite layers. The dissolution of montmorillonite was studied also by modelling with TOUGHREACT. The experimental and modelled results were compared revealing a need to develop the model e.g. in respect of the evolution of pH.

Type
Articles
Copyright
Copyright © Materials Research Society 2012

Access options

Get access to the full version of this content by using one of the access options below. (Log in options will check for institutional or personal access. Content may require purchase if you do not have access.)

References

REFERENCES

1. Chipera, S. J. and Bish, D. L., Clays and Clay Miner., 49 (5), 398409 (2001)10.1346/CCMN.2001.0490507Google Scholar
2. Tournassat, C., Greneche, J-M, Tisserand, D. and Charlet, L., Colloid Interface Sci., 273 (1), 224–223 (2004)10.1016/j.jcis.2003.11.021Google Scholar
3. Ammann, L., Cation exchange and adsorption on clays and clay minerals, Dissertation, Submitted for the degree “Dr. rer. nat.” of the faculty of mathematics and natural sciences, Chistian-Albrechts-Universität (2003)Google Scholar
4. Baeyens, B. and Bradbury, M.H., A quantitative mechanistic description of Ni, Zn and Ca sorption on Na-montmorillonite. Part I: Physico-chemical characterization and titration measurements. PSI Bericht Nr. 95-10 and Nagra NTB 95-04, 64 (1995)Google Scholar
5. Wolery, T.J, and Jarek, R.J, Software User’s Manual for EQ3/6, Version 8.0, U.S. Department of Energy, Office of Civilian Radioactive Waste Management, (Las Vegas, Nevada, 2003) Software Document Number 10813-UM-8.0–00., p.118 Google Scholar
6. Reynolds, R.C., Interstratified clay minerals. in Crystal structure of clay minerals and their X-ray identification, Brindley, G.W. and Brown, G., eds., (Miner. Soc., London, 1980) 249303 Google Scholar
7. Moore, D.M. and Reynolds, R.C., X-ray diffraction and the identification and analysis of clay mineral, (Oxford University press, New York, 1989) 332 p.Google Scholar
8. Rozalen, M.L., Huertas, F.J., Brady, P.V., Cama, J., Carcía-Palma, S. and Linares, J., Geochim. Cosmochim. Acta, 72, 42244253 (2008)10.1016/j.gca.2008.05.065Google Scholar
9. PetraSim User Manual, (Thundernead Engineering, Manhattan, 2008) p. 96 Google Scholar