Hostname: page-component-78c5997874-4rdpn Total loading time: 0 Render date: 2024-11-19T05:48:44.475Z Has data issue: false hasContentIssue false
  • English
  • Français

Alignment of the lamellar orientation of multi-component TiAl alloys by directional solidification (DS) and mechanical properties of DS ingots

Published online by Cambridge University Press:  11 February 2011

Y. Omiya ,
S. Muto ,
T. Yamanaka ,
D. R. Johnson ,
H. Inui  and
M. Yamaguchi
Y. Omiya
Affiliation:
Department of Materials Science and Engineering, Kyoto University, Sakyo-ku, Kyoto 606–8501, Japan.
S. Muto
Affiliation:
Department of Materials Science and Engineering, Kyoto University, Sakyo-ku, Kyoto 606–8501, Japan.
T. Yamanaka
Affiliation:
Department of Materials Science and Engineering, Kyoto University, Sakyo-ku, Kyoto 606–8501, Japan.
D. R. Johnson
Affiliation:
School of Materials Engineering, Purdue University, 1289 MSEE Building, West Lafayette, IN 47907–1289, U. S. A.
H. Inui
Affiliation:
Department of Materials Science and Engineering, Kyoto University, Sakyo-ku, Kyoto 606–8501, Japan.
M. Yamaguchi
Affiliation:
Department of Materials Science and Engineering, Kyoto University, Sakyo-ku, Kyoto 606–8501, Japan.
Get access

Abstract

By using an appropriately oriented seed from the TiAl-Si system (Ti-43Al-3Si), the TiAl/Ti3Al lamellar structure has been successfully aligned parallel to the growth direction for TiAl ingots of the Ti-Al-Nb, Ti-Al-Nb-Si, Ti-Al-Ta-Si systems on the basis of the recently proposed method to predict the appropriate compositions. The Al equivalents for Nb and Ta are reevaluated in order to extend the proposed method to large addition (above a several at. %) of these alloying elements. These DS ingots with the lamellar structure all aligned parallel to the loading axis exhibit creep properties far better than conventionally produced TiAl ingots so far reported.

Type
Research Article
Information
MRS Online Proceedings Library (OPL) , Volume 753: Symposium BB – Defect Properties and Related Phenomena in Intermetallic Alloys , 2002 , BB5.2
Copyright
Copyright © Materials Research Society 2003

Access options

Get access to the full version of this content by using one of the access options below. (Log in options will check for institutional or personal access. Content may require purchase if you do not have access.)

References

REFERENCES

[1] Yamaguchi, M. and Inui, H., in Structural Intermetallics, edited by Darolia, R., Lewandowski, J.J., Liu, C.T., Martin, P.L., Miracle, D.B. and Nathal, M.V. (TMS, Warrendale, PA, 1995) p. 127.Google Scholar
[2] Kim, Y-W., J. Metals, 46, 30 (1994).Google Scholar
[3] Appel, F. and Wagner, R., Mater. Sci. Eng., R22, 187 (1998).Google Scholar
[4] Fujiwara, T., Nakamura, A., Hosomi, M., Nishitani, S.R., Shirai, Y. and Yamaguchi, M., Phil. Mag. A, 61, 591 (1990).Google Scholar
[5] Inui, H., Nakamura, A., Oh, M.H. and Yamaguchi, M., Acta Mater., 40, 3059 (1992).Google Scholar
[6] Johnson, D.R., Inui, H. and Yamaguchi, M., Acta Mater., 44, 2523 (1996).Google Scholar
[7] Johnson, D.R., Masuda, Y., Inui, H. and Yamaguchi, M., Acta Mater., 45, 2523 (1997).Google Scholar
[8] Yamanaka, T., Johnson, D.R., Inui, H. and Yamaguchi, M., Intermetallics, 7, 779 (1999).Google Scholar
[9] Muto, S., Yamanaka, T., Johnson, D.R., Inui, H. and Yamaguchi, M., Mater. Sci. Eng., A329–331, 424 (2002).Google Scholar
[10] Beddoes, J., Wallance, W. and Zhao, L., Int. Mater. Rev., 40, 197 (1995).Google Scholar
[11] Parthasarathy, T.A., Mendiratta, M.G. and Dimiduk, D.M., Scripta Mater., 37, 315 (1997).Google Scholar