Hostname: page-component-586b7cd67f-tf8b9 Total loading time: 0 Render date: 2024-11-27T11:17:02.987Z Has data issue: false hasContentIssue false

200 °C Preparation of SiNx Passivation Films for PZT Ferroelectric Capacitors by Catalytic CVD

Published online by Cambridge University Press:  21 March 2011

Toshiharu Minamikawa
Affiliation:
Japan Advanced Institute of Science and Technology, 1-1 Asahidai, Tatsunokuchi, Ishikawa 923-1292, JAPAN, [email protected] Industrial Research Institute of Ishikawa, Ro-1 Tomizu-machi, Kanazawa, Ishikawa 920-0223, JAPAN
Yasuto Yonezawa
Affiliation:
Industrial Research Institute of Ishikawa, Ro-1 Tomizu-machi, Kanazawa, Ishikawa 920-0223, JAPAN
Yoshikazu Fujimori
Affiliation:
Japan Advanced Institute of Science and Technology, 1-1 Asahidai, Tatsunokuchi, Ishikawa 923-1292, JAPAN Industrial Research Institute of Ishikawa, Ro-1 Tomizu-machi, Kanazawa, Ishikawa 920-0223, JAPAN
Takashi Nakamura
Affiliation:
Rohm Co., Ltd., 21 Saiin Mizosaki-cho, Ukyo-ku, Kyoto 615-8585, JAPAN
Atsushi Masuda
Affiliation:
Japan Advanced Institute of Science and Technology, 1-1 Asahidai, Tatsunokuchi, Ishikawa 923-1292, JAPAN
Hideki Matsumura
Affiliation:
Japan Advanced Institute of Science and Technology, 1-1 Asahidai, Tatsunokuchi, Ishikawa 923-1292, JAPAN
Get access

Abstract

Feasibility of SiNx passivation films at low substrate temperatures prepared by catalytic chemical vapor deposition (Cat-CVD) is studied for ferroelectric nonvolatile random access memories (FRAMs). SiNx films were prepared at low substrate temperatures of 100 °C, 175 °C and 200 °C using Cat-CVD. Adjusting on flow rate ratio of SiH4/NH3, the refractive index of SiNx film, deposited at 175 °C and 200 °C, measured by ellipsometry is controlled around 2.0. SiNx films, with the refractive index around 2.0, deposited at only 200 °C show the following properties. 1) No oxidation during air exposure for 3 months was observed for the films. 2) Etching rate of the films in buffered HF is 20 nm/min. The dense SiNx film, which is resistive for oxidation in air exposure and dissolution in buffered HF, is prepared at 200 °C and the film is suitable to the passivation of ferroelectric capacitors.

Type
Research Article
Copyright
Copyright © Materials Research Society 2001

Access options

Get access to the full version of this content by using one of the access options below. (Log in options will check for institutional or personal access. Content may require purchase if you do not have access.)

References

[1] Onishi, S., Hamada, K., Ishikawa, K., Ito, Y., Yokoyama, S., Kudo, J. and Sakiyama, K.: Tech. Dig. 1994 Int. Electron Devices Meeting, San Francisco, 1994, p. 843.10.1109/IEDM.1994.383281Google Scholar
[2] Tanabe, N., Matsuki, T., Saitoh, S., Takeuchi, T., Kobayashi, S., Nakajima, T., Maejima, Y., Hayashi, Y., Amanuma, K., Hase, T., Miyasaka, Y. and Kunio, T.: Dig. Tech. Pap. 1995 Symp. VLSI Technology, Kyoto, 1995, p. 123.10.1109/VLSIT.1995.520888Google Scholar
[3] Fujisaki, Y., Kushida-Abdelghafar, K., Shimamoto, Y. and Miki, H.: J. Appl. Phys. 82, 341 (1997).10.1063/1.365818Google Scholar
[4] Boher, P., Renaud, M., Ijzendoorn, L. and Hily, Y.: Appl. Phys. Lett. 54, 511 (1989).10.1063/1.100915Google Scholar
[5] Okada, S. and Matsumura, H.: Jpn. J. Appl. Phys. 36, 7035 (1997).10.1143/JJAP.36.7035Google Scholar
[6] Okada, S. and Matsumura, H.: Mater. Res. Soc. Symp. Proc. 446, 109 (1997).10.1557/PROC-446-109Google Scholar
[7] Minamikawa, T., Yonezawa, Y., Nakamura, T., Fujimori, Y., Masuda, A. and Matsumura, H.: Jpn. J. Appl. Phys. 38, 5358 (1999).10.1143/JJAP.38.5358Google Scholar
[8] Minamikawa, T., Yonezawa, Y., Fujimori, Y., Nakamura, T., Masuda, A. and Matsumura, H.: Mater. Res. Soc. Symp. Proc. 596, 271 (2000).10.1557/PROC-596-271Google Scholar
[9] Minamikawa, T., Yonezawa, Y., Heya, A., Fujimori, Y., Nakamura, T., Masuda, A. and Matsumura, H.: Ext. Abst. 1st Int. Conf. Cat-CVD (Hot-Wire CVD) Process, Kanazawa, 2000, p. 253.Google Scholar
[10] Karasawa, M., Masuda, A., Ishibashi, K. and Matsumura, H.: Ext. Abst. 1st Int. Conf. Cat-CVD (Hot-Wire CVD) Process, Kanazawa, 2000, p. 117.Google Scholar
[11] Tsu, D. V., Lucovsky, G. and Mantini, M. J.: Phys. Rev. B 33, 7069 (1986).10.1103/PhysRevB.33.7069Google Scholar