Hostname: page-component-745bb68f8f-cphqk Total loading time: 0 Render date: 2025-02-05T14:34:43.405Z Has data issue: false hasContentIssue false
  • English
  • Français

Abrasive Effects in Oxide Chemical Mechanical Polishing

Published online by Cambridge University Press:  10 February 2011

Uday Mahajan ,
Marc Bielmann  and
Rajiv K. Singh
Uday Mahajan
Affiliation:
Department of Materials Science and Engineering and Engineering Research Center for Particle Science and Technology, University of Florida, Gainesville, FL 32611
Marc Bielmann
Affiliation:
Department of Materials Science and Engineering and Engineering Research Center for Particle Science and Technology, University of Florida, Gainesville, FL 32611
Rajiv K. Singh
Affiliation:
Department of Materials Science and Engineering and Engineering Research Center for Particle Science and Technology, University of Florida, Gainesville, FL 32611
Get access

Abstract

In this study, we have characterized the effects of abrasive properties, primarily particle size, on the Chemical Mechanical Polishing (CMP) of oxide films. Sol-gel silica particles with very narrow size distributions were used for preparing the polishing slurries. The results indicate that as particle size increases, there is a transition in the mechanism of material removal from a surface area based mechanism to an indentation-based mechanism. In addition, the surface morphology of the polished samples was characterized, with the results showing that particles larger than 0.5 μm are detrimental to the quality of the SiO2 surface.

Type
Research Article
Information
MRS Online Proceedings Library (OPL) , Volume 566: Symposium P – Chemical-Mechanical Poilshing-Fundamentals and Challenges , 1999 , 27
Copyright
Copyright © Materials Research Society 2000

Access options

Get access to the full version of this content by using one of the access options below. (Log in options will check for institutional or personal access. Content may require purchase if you do not have access.)

References

REFERENCES

1. Steigerwald, J.M., Murarka, S.P. and Gutmann, R.J., Chemical Mechanical Planarization of Microelectronic Materials, John Wiley and Sons, New York (1997)10.1002/9783527617746Google Scholar
2. Cook, L.M., Non-Cryst, J.. Solids 120, p. 152 (1990)Google Scholar
3. Izumitani, T., in Treatise on Materials Science and Technology, eds. M., Tomozawa and R., Doremus, Academic Press, New York (1979), p. 115 Google Scholar
4. Jairath, R., Desai, M., Stell, M., Tolles, R., and Scherber-Brewer, D., in Advanced Metallization for Devices and Circuits-Science, Technology and Manufacturability, edited by S.P, Murarka, A., Katz, K.N., Tu and K., Maex ( Mater. Res. Soc. Proc. 337, Pittsburgh, PA 1994), p. 121 Google Scholar
5. Xie, Y. and Bhushan, B., Wear 200, p. 281 (1996)10.1016/S0043-1648(96)07275-4Google Scholar
6. Sivaram, S., Bath, M. H.M., Lee, E., Leggett, R., and Tolles, R., Proc. SRC Topical Research Conference on Chem-Mechanical Polishing for Planarization, SRC, Research Triangle Park, NC (1992), proc. Vol. #P92008Google Scholar
7. Bielmann, M., Mahajan, U. and Singh, R.K. (this symposium)Google Scholar
8. Bielmann, M., Mahajan, U. and Singh, R.K., J. Electrochem. Soc. (to be submitted)Google Scholar
9. Brown, N.J., Baker, P.C. and Maney, R.T., Proc. SPIE 306, 42(1981)10.1117/12.932717Google Scholar