Hostname: page-component-586b7cd67f-dsjbd Total loading time: 0 Render date: 2024-11-26T18:54:58.998Z Has data issue: false hasContentIssue false
  • English
  • Français

Ablation-Induced Stresses in Fused Silica by 157-nm F2-Laser irradiation

Published online by Cambridge University Press:  10 February 2011

Igor A. Konovalov  and
Peter R. Herman
Igor A. Konovalov
Affiliation:
Department of Electrical and Computer Engineering, University of Toronto, 10 King's College Road, Toronto, ON, Canada, M5S 3G4
Peter R. Herman
Affiliation:
Department of Electrical and Computer Engineering, University of Toronto, 10 King's College Road, Toronto, ON, Canada, M5S 3G4
Get access

Abstract

The F2laser is a promising source for direct etching of microstructures and the precise shaping of optical-grade surfaces on wide bandgap materials such as fused silica. We report here on residual tensile stresses induced in fused silica (Coming 7940, UV grade) by 157-nm laser ablation. Plastic strain of 160-mm thick rectangular strips, monitored with an optical interferometric microscope, revealed the presence of residual tensile stresses in the near-ablated surface. HF chemical thinning of the sample showed the thickness of ablation-affected layer provoking strain was ∼275 nm, a value independent of laser fluence (1.9-4.7 J/cm2) and scanning speed (94 - 220 µm/s). A near-surface mean residual tensile stress of ∼80 MPa was inferred from a thin film-substrate approximation.

Type
Research Article
Information
MRS Online Proceedings Library (OPL) , Volume 617: Symposium J – Laser-Solid Interactionsfor Materials Processing , 2000 , J3.3
Copyright
Copyright © Materials Research Society 2000

Access options

Get access to the full version of this content by using one of the access options below. (Log in options will check for institutional or personal access. Content may require purchase if you do not have access.)

References

1 Thin Films: Stresses and Mechanical Properties I to VII, MRS Proc. 130 (1988); 188(1990); 239(1991); 308(1993); 356(1994); 436(1996); 505(1997); 646(1998).Google Scholar
2 Braren, B., Srinivasan, R., J. Vac. Sci. Technol., B6, 537 (1988).Google Scholar
3 Ihlemann, J., Appl. Surf Sci., 54, 193 (1992).Google Scholar
4 Buerhop, C. Weissmann, R., Appl. Surf Sci., 54, 187 (1992).Google Scholar
5 Dyer, P.E., Farley, R.J., Giedl, R. Karnakios, D.M., Appl. Surf Sci., 96–98, 537 (1996).Google Scholar
6 Zang, J., Sugioka, K., Wada, S., Tashiro, H., Toyoda, K., Jpn. J. Appl. Phys. 35, L1422 (1996).Google Scholar
7 Tkigawa, Y., Kurosawa, K., Sasaki, W., Okuda, M., Yoshida, K., Fujiwara, E., Kato, Y., Inoue, Y., J. Non-Crystal. Solids, 125, 107 (1990).Google Scholar
8 Sugioka, K., Wada, S., Ohnuma, Y., Nakamura, A., Tashiro, H., Toyoda, K., Appl. Surf Sci., 96–98, 347 (1996).Google Scholar
9 Sugioka, K., Wada, S., Tsunemi, A., Sakai, T., Takai, H., Moriwaki, H., Nakamura, A., Tashiro, H., Toyoda, K., Jpn. J. Appl. Phys. 32, 6185 (1993).Google Scholar
10 Herman, P.R., Chen, B., Moore, D.J., Canaga-Retnam, M., MRS Proc. 236, 53 (1992).Google Scholar
11 Herman, P.R., Beckley, K., Jackson, B., Kurosawa, K., Moore, D., Yamanishi, T., Yang, J. H., SPIE Proc. 2992, 86 (1997).Google Scholar
12 Herman, P. R., Marjoribanks, R.S., Oettl, A., Chen, K., Konovalov, I., Ness, S., Appl. Surf. Sci., 154–155, 577 (2000).Google Scholar
13 Borrelli, N.F., Smith, C., Allan, D.C., Seward, T.P., J. Opt. Soc. Am., B14, 1606 (1997).Google Scholar
14 Cochran, E. R., Ai, C., Appl. Optics, 31, 6702 (1992).Google Scholar
15 Dahmani, F., Schmid, A.W., Lambropoulos, J.C., Burns, S., Appl. Optics, 37, 7772 (1998).Google Scholar
16 Guignard, F., Autric, M.L., Baudinaud, V., SPIE Proc., 3343, 534 (1998).Google Scholar
17 Hoffmnan, R.W., in ’Physics of Thin Films’, ed. Hassand, G and Thun, R.E., (Academic Press Inc., New York, 1966) 3, pp.211–272.Google Scholar
18 Oliver, W.C., Pharr, G.M., J. Mater. Res., 7, 1564 (1992).Google Scholar
19 Dahmani, F., Lambrpoulos, J.C., Schmid, A.W., Papernov, S., Burns, S.J., J. Mater. Res., 14, 597 (1999).Google Scholar
20 Efimov, O.M., Glebov, L., Papernov, S., Schmid, A.W., SPIE Proc., 3578, 564 (1999).Google Scholar
21 Papernov, S., Zaksas, D., Anzellotti, J.F., Smith, D.J., Schimid, A.W., Collier, D.R., Carbone, F.A., SPIE Proc., 3244, 434 (1998).Google Scholar
22 Sakaguchi, S. Kimura, T., J. Am.Ceram.Soc., 64, 259 (1981).Google Scholar
23 Chandan, H.C. Kalish, D., J. Am.Ceram. Soc., 65, 171 (1982).Google Scholar