Hostname: page-component-586b7cd67f-2plfb Total loading time: 0 Render date: 2024-11-23T05:06:35.687Z Has data issue: false hasContentIssue false
  • English
  • Français

A 3‐dB Quadrature WLP Coupler for 60 GHz Applications

Published online by Cambridge University Press:  12 June 2012

Hamid Kiumarsi ,
Hiroyuki Ito ,
Noboru Ishihara ,
Kenichi Okada ,
Yusuke Uemichi ,
Yasuto Chiba  and
Kazuya Masu
Hamid Kiumarsi
Affiliation:
Solutions Research Laboratory, Tokyo Institute of Technology, Midori-ku, Yokohama, 226-8503, Japan
Hiroyuki Ito
Affiliation:
Solutions Research Laboratory, Tokyo Institute of Technology, Midori-ku, Yokohama, 226-8503, Japan
Noboru Ishihara
Affiliation:
Solutions Research Laboratory, Tokyo Institute of Technology, Midori-ku, Yokohama, 226-8503, Japan
Kenichi Okada
Affiliation:
Department of Physical Electronics, Tokyo Institute of Technology, Meguro-ku, Tokyo, 152-8552, Japan
Yusuke Uemichi
Affiliation:
Electron Device Laboratory, Fujikura Ltd, Sakura, Chiba, 285-8550, Japan
Yasuto Chiba
Affiliation:
Electron Device Laboratory, Fujikura Ltd, Sakura, Chiba, 285-8550, Japan
Kazuya Masu
Affiliation:
Solutions Research Laboratory, Tokyo Institute of Technology, Midori-ku, Yokohama, 226-8503, Japan
Get access

Abstract

A 60 GHz tandem coupler using offset broadside coupled lines is proposed in a WLP (Wafer Level Packaging) technology. The fabricated coupler has a core chip area of 750 μm × 385 μm (0.288 mm2). The measured results show an insertion loss of 0.44 dB, an amplitude imbalance of 0.03 dB and a phase difference of 87.6° at 60 GHz. Also the measurement shows an insertion loss of less than 0.67 dB, an amplitude imbalance of less than 0.31 dB, a phase error of less than 3.7°, an isolation of more than 29.7 dB and a return loss of more than 27.9 dB at the input ant coupled ports and more than 14.3 dB at the direct and isolated ports over the frequency band of 57-66 GHz, covering 60 GHz band both in Japan and US. To the best of our knowledge the proposed coupler achieves the lowest ever reported insertion loss and amplitude imbalance for a 3-dB coupler on a silicon substrate. With its superior performance and lower cost compared to the CMOS counterparts, the proposed coupler is a suitable candidate for low-cost high-performance millimeter-wave systems.

Keywords

packagingelectronic structuremicroelectronics
Type
Research Article
Information
MRS Online Proceedings Library (OPL) , Volume 1427: Symposium B – Heterogeneous Integration Challenges of MEMS, Sensor and CMOS LSI , 2012 , mrss12-1427-b06-04
Copyright
Copyright © Materials Research Society 2012

Access options

Get access to the full version of this content by using one of the access options below. (Log in options will check for institutional or personal access. Content may require purchase if you do not have access.)

References

REFERENCES

1. Yao, T., Gordon, M. Q., Tang, K. K. W., Yau, K. H. K., Yang, M. T., Schvan, P., and Voinigescu, S. P., “Algorithmic design of CMOS LNAs and PAs for 60-GHz radio,” IEEE J. Solid State Circuits, vol. 42, no. 5, pp. 1044–1057, May 2007.Google Scholar
2. Kuo, C.-Y., Chen, A.Y.-K., Lee, C.-M. and Luo, C.-H., “Miniature 60 GHz slow-wave CPW branch-line coupler using 90 nm digital CMOS process,” Electronics Letters, vol. 47, no. 16, pp. 924–925, Aug. 2011 Google Scholar
3. Haroun, I., Wight, J., Plett, C., Fathy, A., and Chang, D.-C., “Experimental analysis of a 60 GHz compact EC-CPW branch-line coupler for mm-wave CMOS radios,” IEEE Microw. Wirel. Compon. Lett., vol. 20, no. 4, pp. 211–213, Apr. 2010 Google Scholar
4. Uemichi, Y., Hatakeyama, H., Aizawa, T., Okada, K., Kiumarsi, H., Tanoi, S., Ishihara, N. and Masu, K., “Low-loss and Compact Millimeter-wave Balun on Si,” in the proc. of the IEEE MTT-S International Microwave Symposium (IMS), pp. 1–4, Jun. 2011 Google Scholar
5. Haroun, I., Plett, C., Hsu, Y.-C. and Chang, D.-C., “Compact 60-GHz IPD-Based Branch-Line Coupler for System-on-Package V-Band Radios,” IEEE Trans. Compon. Packag. Technol., 2012 Google Scholar
6. Reid, J. and Webster, R., “A 60 GHz branch line coupler fabricated using integrated rectangular coaxial lines,” in Proc. IEEE MTT-S Int. Micro. Sump. Dig., vol. 2, Jun. 2004, pp. 441–444.Google Scholar