Hostname: page-component-586b7cd67f-dsjbd Total loading time: 0 Render date: 2024-11-23T12:04:21.871Z Has data issue: false hasContentIssue false
  • English
  • Français

Novel Preparation Methods for High TcOxide Superconductors

Published online by Cambridge University Press:  29 November 2013

W.J. Nellis  and
L.D. Woolf
Get access

Extract

High Tc oxide superconductors can be prepared by a variety of novel metallurgical or ceramic processing techniques. For example, forming metallic precursors of YBa2Cu3 or REBa2Cu3, where RE is a rare earth element, followed by oxidation has yielded the corresponding ceramic oxide in pellet, wire, and thin film forms. Ceramic fabrication techniques (which often involve incorporating fine particles of the ceramic in a suitable vehicle) such as doctor-blade tape casting and screen printing have been utilized to synthesize both tapes and thin films. Due to intense worldwide effort to develop these ceramics into useable forms, many unique fabrication techniques have been employed, such as the melt-textured growth method of Jin et al. and dynamic compaction. In addition, it is likely that numerous laboratories, particularly industrial, are developing proprietary methods to fabricate wire and other forms but have not published these results due to the intensely competitive nature of this area. In this article, we review some of the methods reported so far for preparing high Tc ceramic superconductors, and we discuss one example of a proprietary method being developed at one of the author's (LDW) laboratories.

Tapes of YBa2cu3O7-x fabricated using the doctor-blade tape casting technique were first displayed by AT&T Bell Laboratories scientists at the 1987 March meeting of the American Physical Society. This method involves mixing ceramic powder, a binder to provide green (unfired ceramic) strength, a plasticizer to provide flexibility, a dispersant to prevent particle agglomeration and a solvent. After mixing all these components together, the solution is poured into a “doctor blade” device which allows a controlled thickness of material to be deposited on a plastic film carrier that passes underneath the doctor blade.

Type
High Tc Superconductors
Information
MRS Bulletin , Volume 14 , Issue 1 , January 1989 , pp. 63 - 66
Copyright
Copyright © Materials Research Society 1989

Access options

Get access to the full version of this content by using one of the access options below. (Log in options will check for institutional or personal access. Content may require purchase if you do not have access.)

References

1.Haldar, R., Lu, Y.Z., and Giessen, B.C., Appl. Phys. Lett. 51 (1987) p. 538.CrossRefGoogle Scholar
2.Yurek, G.J., VanderSande, J.B., Wang, W.-X., Rudman, D.A., Zhang, Y., and Matthiesen, M.M., Met. Trans. A, 18A (1987) p. 1813.CrossRefGoogle Scholar
3.Early, E.A., Seaman, C.L., Maple, M.B., and Simnad, M.T., Physica C 153–155 (1988) p. 1161.CrossRefGoogle Scholar
4.Chen, H.S., Liou, S.H., Korten, A.R., and Kimerling, L.C., Appl. Phys. Lett. 53 (1988) p. 705.CrossRefGoogle Scholar
5.Johnson, D.W. and Grader, G.S., J. Am. Ceram. Soc. 71 (1988) p. C–291.Google Scholar
6.Tabuchi, J. and Utsumi, K., Appl. Phys. Lett. 53 (1988) p. 606.CrossRefGoogle Scholar
7.Bansal, N.P., Simons, R.N., and Farrell, D.E., Appl. Phys. Lett. 53 (1988) p. 603.CrossRefGoogle Scholar
8.Jin, S., Tiefel, T.H., Sherwood, R.C., Davis, M.E., van Dover, R.B., Kammlott, G.W., Fastnacht, R.A., and Keith, H.D., Appl. Phys. Lett. 52 (1988) p. 2074.CrossRefGoogle Scholar
9.Murphy, D.W., Johnson, D.W. Jr., Jin, S., and Howard, R.E., Science 241 (1988) p. 922.CrossRefGoogle Scholar
10.Williams, J.C., in Treatise on Materials Science and Technology, Vol. 9, Ceramic Fabrication Processes, edited by Wang, F.F.Y (Academic Press, New York, 1976) p. 173.Google Scholar
11.Singh, J.P., Shi, D., and D.W. Capone, II, Appl. Phys. Lett. 53 (1988) p. 237.CrossRefGoogle Scholar
12.Goto, T., Jap. J. Appl. Phys. 27 (1988) p. L680.CrossRefGoogle Scholar
13.D.W. Capone, II, Dusek, J.T., and Goretta, K.C., Proc. International Wire and Cable Symposium (1987) p. 104.Google Scholar
14.Tanaka, Y., Yamada, K., and Sano, T., Jap. J. Appl. Phys. 27 (1988) p. L799.CrossRefGoogle Scholar
15.Tabuchi, J. and Utsumi, K., Appl. Phys. Lett. 53 (1988) p. 606.CrossRefGoogle Scholar
16.Tachikawa, K., Watanabe, I., Kosuge, S., Kabasawa, M., Suzuki, T., Matsuda, Y., and Shinbo, Y., Appl. Phys. Lett., 52 (1988) p. 1011.CrossRefGoogle Scholar
17.Matsuda, S., Okada, M., Morimoto, T., Matsumoto, T., and Aihara, K., in High-Temperature Superconductors, edited by Brodsky, M.B., Dynes, R.C., Kitazawa, K., and Tuller, H.L. (Mater. Res. Soc. Symp. Proc. 99, Pittsburgh, PA, 1988) p. 695.Google Scholar
18.Sadakata, N., Ikeno, Y., Nakagawa, M., Gotoh, K., and Kohno, O., ibid., p. 293.Google Scholar
19.Sekine, H., Inoue, K., Maeda, H., Numata, K., Mori, K., and Yamamoto, H., Appl. Phys. Lett., 52 (1988) p. 2261.CrossRefGoogle Scholar
20.Nellis, W.J., Maple, M.B., and Geballe, T.H., in Communications on the Materials Science and Engineering Study, (Materials Research Society, Pittsburgh, PA, 1986) p. 25–28.Google Scholar
21.Nesterenko, V.F. and Muzykantov, A.V., Soviet Combustion, Explosion and Shock Waves, 21 (1985) p. 240.CrossRefGoogle Scholar
22.Murr, L.E., Monson, T., Javadpour, J., Strasik, M., Sudarsan, U., Eror, N.G., Hare, A.W., Brasher, D.G., and Butler, D.J., J. Metals, 40 (1988) p. 19.Google Scholar
23.Johnson, K.A., Staudhammer, K.P., Medina, W.J., Pierce, C.B., and Elliott, N.E., Scripta Met., 22 (1988) p. 1689.CrossRefGoogle Scholar
24.Matizen, E.V., Deribas, A.A., Nesterenko, V.F., Pershin, S.A., Bezverkhii, P.P., Voronin, A.N., Yefremova, R.I., and Starikov, M.A., First Asia-Pacific Conference on Condensed Matter Physics, Singapore, July 1988.Google Scholar
25.Nellis, W.J., Geballe, T.H., and Maple, M.B., U.S. Patents, 4,717,627 and 4,762,754, 1988.Google Scholar
26.Nellis, W.J., Maple, M.B., and Geballe, T.H., in SPIE Vol. 878-Multifunctional Materials, edited by Gunshor, R.L. (SPIE, Bellingham, WA, 1988) p. 2–9.CrossRefGoogle Scholar
27.Sawaoka, A. and Kondo, K., in Shock Waves in Condensed Matter 1981, edited by Nellis, W.J., Seaman, L., and Graham, R.A. (American Institute of Physics, New York, 1982) p. 696–700.Google Scholar
28.Syono, Y and Goto, T., ibid, p. 701–705.Google Scholar
29.Geballe, T.H. and Hulm, J.K., Science, 239 (1988) p. 367.CrossRefGoogle Scholar
30. These features of shock compaction were used originally to compact metastable metallic glasses, which lose their amorphous structure if compacted at static high temperature: Cline, C.F. and Hopper, R.W., Scripta Met. 11 (1977) p. 1137.CrossRefGoogle Scholar
31.Nellis, W.J., Scripta Met. 22 (1988) p. 121.CrossRefGoogle Scholar
32.Morosin, B., Graham, R.A., Venturini, E.L., Ginley, D.S., and Hammetter, W.F., in Shock Waves in Condensed Matter 1987, edited by Schmidt, S.C. and Holmes, N.C. (Elsevier, Amsterdam, 1988) p. 439–442.Google Scholar
33.Miller, A.R., in Proc. First Workshop on Industrial Applications of Shock Processing of Powders, edited by Meyers, M.A. and Thadhani, N.N. (Center for Explosives Technology Research, Socorro, NM, 1988) p. 217–222.Google Scholar
34.Second Workshop on Industrial Application Feasibility of Dynamic Compaction Technology, Tokyo, December 1988.Google Scholar
35.Hagino, S., Suzuki, M., Takeshita, T., Takashima, K., and Honda, H., ibid.Google Scholar
36.Iqbal, Z., ibid.Google Scholar
37.Yoshimoto, M., Yamamoto, H., Koinuma, H., and Sawaoka, A. B., ibid.Google Scholar