Hostname: page-component-78c5997874-8bhkd Total loading time: 0 Render date: 2024-11-05T10:27:23.077Z Has data issue: false hasContentIssue false

Microstructure-Property Relationships in Macro-Defect-Free Cement

Published online by Cambridge University Press:  29 November 2013

Get access

Extract

The term “macro-defect-free” refers to the absence of relatively large voids (or defects) that are normally present in conventional cement pastes due to entrapped air or inadequate mixing. A decade ago, Birchall and co-workers developed a novel processing method that avoids the formation of these strength-limiting defects. This method, outlined schematically in Figure 1, consists of mixing hydraulic cement powder, a water-soluble polymer, and a minimal amount of water under high shear to produce a macro-defect-free (MDF) cement composite. Several cement/polymer systems can be processed by this flexible technique, although the calcium aluminate cement/polyvinyl alcohol-acetate (PVA) copolymer system is most common: MDF cements display unique properties relative to conventional cement pastes. For example, the flexural strength of MDF cement is more than 200 MPa as compared to values on the order of 10 MPa for conventional pastes. One can view MDF cements as a type of “inorganic plastic.” As is the case with plastic processing, fillers such as alumina, silicon carbide, or metal powders can be added to MDF cement to modify its performance properties (e.g., abrasion resistance, thermal or electrical conductivity, and hardness). The combined attractiveness of inexpensive raw materials and flexible, low-temperature processing has generated great interest in this new class of advanced cement-based materials.

Type
Advanced Cement-Based Materials
Copyright
Copyright © Materials Research Society 1993

Access options

Get access to the full version of this content by using one of the access options below. (Log in options will check for institutional or personal access. Content may require purchase if you do not have access.)

References

1.Birchall, J.D., Howard, A.J., and Kendall, K., U.S. Patent No. 4,410,366 (1983).Google Scholar
2.Kendall, K., Howard, A.J., and Birchall, J.D., Philos. Trans. R. Soc. London, Ser. A 310 (1983) p 139.Google Scholar
3.Edmonds, R.N. and Majumdar, A.J., J. Mater. Sci. 24 (1989) p. 3813.CrossRefGoogle Scholar
4.Birchall, J.D., Howard, A.J., and Kendall, K., Ceram. Soc. Proc. 32 (1982) p. 25.Google Scholar
5.Alford, N.M. and Birchall, J.D., in Very High Strength Cement-Based Materials, edited by Young, J.F. (Mater. Res. Soc. Symp. Proc. 42, Pittsburgh, PA, 1985) p. 265.Google Scholar
6.Roy, D.M., Science 35 (1987) p. 651.CrossRefGoogle Scholar
7.Birchall, J.D., Philos. Trans. R. Soc. London, Ser. A 310 (1983) p. 31.Google Scholar
8.Popoola, O.O., Kriven, W.M., and Young, J.F., J. Ultramicrosc. 37 (1991) p. 318.CrossRefGoogle Scholar
9.Popoola, O.O. and Kriven, W.M., J. Mater. Res. 7 (1992) p. 1545.CrossRefGoogle Scholar
10.Rodger, S.A., Brooks, S.A., Sinclair, W., Groves, G.W., Double, D.D., J. Mater. Sci. 20 (1985) p. 2853.CrossRefGoogle Scholar
11.Poon, C.S., Wassell, L.E., and Groves, G.W., Mater. Sci. Tech. (1988) p. 993.Google Scholar
12.Cannon, C.M. and Groves, G.W., J. Mater. Sci. 21 (1986) p. 4009.CrossRefGoogle Scholar
13.Russell, P.P., Shunkwiler, J., Berg, M., and Young, J.F., Ceram. Trans. 16 (1991) p. 501.Google Scholar