Crossref Citations
This article has been cited by the following publications. This list is generated based on data provided by Crossref.
Boccarusso, Luca
Astarita, Antonello
Carlone, Pierpaolo
Scherillo, Fabio
Rubino, Felice
and
Squillace, Antonino
2019.
Dissimilar friction stir lap welding of AA 6082 - Mg AZ31: Force analysis and microstructure evolution.
Journal of Manufacturing Processes,
Vol. 44,
Issue. ,
p.
376.
Rudawska, Anna
Miturska, Izabela
Wahab, Magd Abdel
Stančeková, Dana
and
Ťavodová, Miroslava
2020.
Influence of the Assembly Method of Sleeve Joints on Their Strength.
Manufacturing Technology,
Vol. 20,
Issue. 5,
p.
660.
Lenart, Ryan
and
Eshraghi, Mohsen
2020.
Modeling columnar to equiaxed transition in directional solidification of Inconel 718 alloy.
Computational Materials Science,
Vol. 172,
Issue. ,
p.
109374.
Santos, Georgia Effgen
Miná, Émerson Mendonça
Pequeno, Doroteu Afonso Coelho
de Miranda, Hélio Cordeiro
and
Silva, Cleiton Carvalho
2021.
Evaluation of solidification cracking of Ni-based alloy dissimilar welds based on Trans-Varestraint test.
Welding in the World,
Vol. 65,
Issue. 10,
p.
1969.
Liu, Shunyu
and
Shin, Yung C.
2021.
Thermodynamically consistent phase-field modeling of competitive polycrystalline growth of beta grains during additive manufacturing of Ti6Al4V.
Journal of Crystal Growth,
Vol. 564,
Issue. ,
p.
126112.
Kumar, Manoj
Gibbons, Gregory J.
Das, Amitabha
Manna, Indranil
Tanner, David
and
Kotadia, Hiren R.
2021.
Additive manufacturing of aluminium alloy 2024 by laser powder bed fusion: microstructural evolution, defects and mechanical properties.
Rapid Prototyping Journal,
Vol. 27,
Issue. 7,
p.
1388.
Liu, Shunyu
Hong, Kyung-min
and
Shin, Yung C.
2021.
A novel 3D cellular automata-phase field model for computationally efficient dendrite evolution during bulk solidification.
Computational Materials Science,
Vol. 192,
Issue. ,
p.
110405.
Kotadia, H.R.
Gibbons, G.
Das, A.
and
Howes, P.D.
2021.
A review of Laser Powder Bed Fusion Additive Manufacturing of aluminium alloys: Microstructure and properties.
Additive Manufacturing,
Vol. 46,
Issue. ,
p.
102155.
Wang, Lu
Guo, Qilin
Chen, Lianyi
and
Yan, Wentao
2023.
In-situ experimental and high-fidelity modeling tools to advance understanding of metal additive manufacturing.
International Journal of Machine Tools and Manufacture,
Vol. 193,
Issue. ,
p.
104077.
Sharma, Shashank
Joshi, Sameehan S.
Pantawane, Mangesh V.
Radhakrishnan, Madhavan
Mazumder, Sangram
and
Dahotre, Narendra B.
2023.
Multiphysics multi-scale computational framework for linking process–structure–property relationships in metal additive manufacturing: a critical review.
International Materials Reviews,
Vol. 68,
Issue. 7,
p.
943.
Rizi, Emad Cheraghi
Ranjbarnodeh, Eslam
and
Mirsalehi, Seyyed Ehsan
2023.
Predicting the quantity and type of intermetallic phases in aluminum–steel dissimilar joints produced by zinc interlayer.
Welding in the World,
Vol. 67,
Issue. 1,
p.
151.
Jafarzad-Shayan, M.M.
Zarei-Hanzaki, A.
Moshiri, A.
Seop Kim, H.
Haftlang, F.
Tahaghoghi, M.
Mahmoudi, M.
Momeni, M.
and
Abedi, H.R.
2023.
Microstructural heterogeneity and exceptional mechanical properties in a wire-arc additively manufactured stainless steel.
Materials Science and Engineering: A,
Vol. 882,
Issue. ,
p.
145473.
Nandi, Shubhra Kamal
Ajithkannan, R.
Withers, Philip J.
Matthews, Allan
Roy, Siddhartha
and
Manna, Indranil
2024.
Effect of laser process parameters on the dilution, microstructure, and wear behaviour of Tribaloy™ T800 cladding on AISI 316 stainless steel.
Journal of Materials Science,
Vol. 59,
Issue. 20,
p.
9042.
Shafipour, Ali
Rahmati, Farhad
Aghakhani, Masood
and
Kolahan, Farhad
2024.
Optimization of penetration depth in submerged arc welding using genetic algorithm.
The International Journal of Advanced Manufacturing Technology,
Xi, Naiyuan
Ni, Zhiyang
Liu, Pengfei
Zhou, You
Fang, Xuewei
Chen, Zhanghua
and
Huang, Ke
2024.
Prediction of low-cycle fatigue properties of additive manufactured IN718 by crystal plasticity modelling incorporating effects from crystallographic orientations and defects.
Virtual and Physical Prototyping,
Vol. 19,
Issue. 1,
Wang, Shanshan
Chen, Zhe
Chen, Ruiguang
Wu, Zhining
Jia, Yunfeng
Zhang, Weijian
Wang, Yixiang
Liu, Weihong
Zhao, Yilu
Shi, Rongpei
Cao, Boxuan
Yu, Suzhu
and
Wei, Jun
2024.
Superior strength-ductility synergy in additively manufactured CoCrFeNi high-entropy alloys with multi-scale hierarchical microstructure.
Journal of Alloys and Compounds,
Vol. 1006,
Issue. ,
p.
176268.
Sharma, Ruchi
Mishra, Avinash
Nath, Ananya
and
Sarkar, Sagar
2024.
Progress in Metallurgical and Mechanical Aspects of Complex Alloying and Composite Systems in Metal Additive Manufacturing.
Transactions of the Indian National Academy of Engineering,
Vol. 9,
Issue. 2,
p.
269.
Peng, Yijie
Fan, Wei
Hao, Dapeng
Feng, Zhe
Dang, Mingji
Hao, Zhiwei
Tan, Hua
Zhang, Fengying
and
Lin, Xin
2025.
Formation mechanism of defects in Invar 36/MnCu functionally graded material fabricated by directed energy deposition.
Journal of Materials Science & Technology,
Vol. 218,
Issue. ,
p.
95.