Crossref Citations
This article has been cited by the following publications. This list is generated based on data provided by
Crossref.
SUGIOKA, Koji
2012.
Fabrication of Optofluidic Devices by Femtosecond Laser.
The Review of Laser Engineering,
Vol. 40,
Issue. 12,
p.
919.
Lin, Jintian
Yu, Shangjie
Ma, Yaoguang
Fang, Wei
He, Fei
Qiao, Lingling
Tong, Limin
Cheng, Ya
and
Xu, Zhizhan
2012.
On-chip three-dimensional high-Q microcavities fabricated by femtosecond laser direct writing.
Optics Express,
Vol. 20,
Issue. 9,
p.
10212.
Cheng, Ya
Liao, Yang
He, Fei
Qiao, Lingling
and
Xu, Zhizhan
2012.
Fabrication of microfluidic systems with arbitrary 3D geometries inside fused silica using femtosecond laser direct writing.
p.
MTh5C.4.
Sugioka, Koji
and
Cheng, Ya
2012.
Femtosecond laser processing for optofluidic fabrication.
Lab on a Chip,
Vol. 12,
Issue. 19,
p.
3576.
Lin, J.
Fang, W.
Cheng, Y.
Yu, S. J.
Ma, Y. G.
He, F.
Qiao, L.
Tong, L.
and
Xu, Z.
2012.
Ultra-high-Q microcavities fabricated on fused silica chips by three-dimensional femtosecond laser microfabrication.
p.
CTh5C.9.
Bellini, Nicola
Bragheri, Francesca
Cristiani, Ilaria
Guck, Jochen
Osellame, Roberto
and
Whyte, Graeme
2012.
Validation and perspectives of a femtosecond laser fabricated monolithic optical stretcher.
Biomedical Optics Express,
Vol. 3,
Issue. 10,
p.
2658.
Schaap, Allison
Rohrlack, Thomas
and
Bellouard, Yves
2012.
Lab on a chip technologies for algae detection: a review.
Journal of Biophotonics,
Vol. 5,
Issue. 8-9,
p.
661.
Sugioka, Koji
Wu, Dong
Midorikawa, Katsumi
Bellouard, Y.
and
Canioni, L.
2013.
Ship-in-a-Bottle Biomicrochips Fabricated by Hybrid Femtosecond Laser Processing.
MATEC Web of Conferences,
Vol. 8,
Issue. ,
p.
05005.
Riken, Koji Sugioka
2013.
Femtosecond laser processing for biochip applications.
p.
1.
Shen, Zhenhua
Zou, Yun
and
Chen, Xianfeng
2013.
An integrated microfluidic signal generator using multiphase droplet grating.
Microfluidics and Nanofluidics,
Vol. 14,
Issue. 5,
p.
809.
Sugioka, Koji
and
Cheng, Ya
2014.
Femtosecond Laser 3D Micromachining for Microfluidic and Optofluidic Applications.
p.
125.
Sugioka, Koji
and
Cheng, Ya
2014.
Femtosecond Laser 3D Micromachining for Microfluidic and Optofluidic Applications.
p.
1.
Sugioka, Koji
and
Cheng, Ya
2014.
Femtosecond Laser 3D Micromachining for Microfluidic and Optofluidic Applications.
p.
35.
del Rosal, B.
Sun, C.
Yan, Y.
Mackenzie, M.D.
Lu, C.
Bettiol, A. A.
Kar, A.K.
and
Jaque, D.
2014.
Flow effects in the laser-induced thermal loading of optical traps and optofluidic devices.
Optics Express,
Vol. 22,
Issue. 20,
p.
23938.
Sugioka, Koji
and
Cheng, Ya
2014.
Femtosecond Laser 3D Micromachining for Microfluidic and Optofluidic Applications.
p.
19.
He, Fei
Liao, Yang
Lin, Jintian
Song, Jiangxin
Qiao, Lingling
Cheng, Ya
and
Sugioka, Koji
2014.
Femtosecond Laser Fabrication of Monolithically Integrated Microfluidic Sensors in Glass.
Sensors,
Vol. 14,
Issue. 10,
p.
19402.
Sugioka, Koji
Xu, Jian
Wu, Dong
Hanada, Yasutaka
Wang, Zhongke
Cheng, Ya
and
Midorikawa, Katsumi
2014.
Femtosecond laser 3D micromachining: a powerful tool for the fabrication of microfluidic, optofluidic, and electrofluidic devices based on glass.
Lab Chip,
Vol. 14,
Issue. 18,
p.
3447.
Chen, Feng
and
de Aldana, J. R. Vázquez
2014.
Optical waveguides in crystalline dielectric materials produced by femtosecond‐laser micromachining.
Laser & Photonics Reviews,
Vol. 8,
Issue. 2,
p.
251.
Wu, J.
Guo, W.
Wang, C.
Li, Y.
Chen, T.
and
Yu, K.
2015.
Improving performances of microchannels in microfluidic chip using solidifiable adhesive film.
Surface Engineering,
Vol. 31,
Issue. 7,
p.
545.
Serhatlioglu, Murat
Ortaç, Bülend
Elbuken, Caglar
Biyikli, Necmi
and
Solmaz, Mehmet E
2016.
CO2laser polishing of microfluidic channels fabricated by femtosecond laser assisted carving.
Journal of Micromechanics and Microengineering,
Vol. 26,
Issue. 11,
p.
115011.