Hostname: page-component-78c5997874-xbtfd Total loading time: 0 Render date: 2024-11-05T15:03:38.200Z Has data issue: false hasContentIssue false

Carbonate Fuel Cell Technology and Materials

Published online by Cambridge University Press:  31 January 2011

Get access

Abstract

High-temperature carbonate fuel cells are recognized as the cleanest and most efficient power generation option for commercial and industrial customers. The firstgeneration carbonate fuel cell plants have shown an electrical efficiency of 45–48%.The electrolyte in this fuel cell is a mixture of alkali carbonates, and it operates at a highenough temperature that the heat by-product can be used for cogeneration applications such as district heating, hot water, process steam, and absorption chilling for air conditioning. Alternatively, the heat by-product can be used with an unfired gas turbine for additional electrical generation. Depending on location, application, and load size, carbonate fuel cells are expected to achieve an overall energy efficiency of 65–80% in cogeneration and combined cycle applications. The cell hardware uses commonly available stainless steels. Electrode materials are nickel-based. Furthermore, standard, well-established manufacturing processes are employed. Therefore, carbonate fuel cells are well positioned to be cost-competitive with alternative technologies. Significant progress has been made in the development, manufacturing, product engineering, and field operation of carbonate fuel cell technology. Megawatt and submegawatt units are operating worldwide. A comprehensive review of carbonate fuel cell technology and materials are presented in this article.

Type
Research Article
Copyright
Copyright © Materials Research Society 2005

Access options

Get access to the full version of this content by using one of the access options below. (Log in options will check for institutional or personal access. Content may require purchase if you do not have access.)

References

1.Fuel Cell Handbook, 6th Ed., EG&G Technical Services Inc., Science Applications International Corp. (U.S. Department of Energy/National Energy Technology Laboratory, November 2002).Google Scholar
2.Farooque, M., Katikaneni, S.9, and Maru, H., in Proc. Carbonate Fuel Cell Technology V, PV99–20 (Electrochemical Society, Pennington, N.J., 1999) p. 47.Google Scholar
3.Yuh, C., Johnsen, R., Farooque, M., and Maru, H., J. Power Sources 56 (1995) p. 1.CrossRefGoogle Scholar
4.Hoffmann, J., Yuh, C., and Jepek, A. Godula, “Electrolyte and Material Challenges,” Chapter 67 in Handbook of Fuel Cells: Fundamentals, Technology, and Applications, Vol. 4 (John Wiley & Sons, Hoboken, N.J., 2003).Google Scholar
5.Primerano, M., Li, J., Yuh, C., and Lucas, T., U.S. patent 6,372,3744 (April 16, 2002).Google Scholar
6.Yuh, C., Farooque, M., and Maru, H., in Proc. Carbonate Fuel Cell Technology V, PV99–20 (Electrochemical Society, Pennington, N.J., 1999) p. 189.Google Scholar
7. FuelCell Energy Inc. press release, September 14, 2004.Google Scholar