Hostname: page-component-cd9895bd7-dzt6s Total loading time: 0 Render date: 2025-01-05T13:48:15.268Z Has data issue: false hasContentIssue false
  • English
  • Français

Bass Handbells of Aluminum

Published online by Cambridge University Press:  29 November 2013

Thomas D. Rossing ,
Deepak Gangadharan ,
Edward R. Mansell  and
Jacob H. Malta
Get access

Extract

Handbells have become very popular musical instruments, especially in schools and churches; about 40,000 hand-bell choirs have been reported in the United States alone. Tuned handbells are generally made of cast bronze, which has been the traditional bell material for many centuries.

Demand for handbells of lower and lower pitches has led to the development of bass bells as low as G0 (fundamental frequency of 24.5 Hz). Unfortunately, these large bass bells radiate inefficiently, especially the bells made of bronze. This is because the speed of bending waves in these bells is considerably lower than the speed of sound in air, a condition known as “being below the coincidence frequency.”

In order to obtain a higher radiation efficiency and thereby enhance the sound of bass bells, the Malmark Company has created a new bell design using aluminum rather than bronze. These bells are larger in diameter, and they have lower coincidence frequencies, both of which lead to more efficient radiation of bass notes. In addition, they are considerably lighter in weight, and thus are much more easily handled by bell ringers.

In this article, the acoustical properties of two G1 handbells, one of aluminum and one of bronze, are compared. The aluminum handbell has a diameter of 48.5 cm, a height of 34 cm, and a wall thickness from 4 to 5 mm. The bronze bell has a diameter of 38.5 cm, a height of 28.5 cm, and a wall thickness from 3 to 4 mm.

Type
Materials in Musical Instruments
Information
MRS Bulletin , Volume 20 , Issue 3 , March 1995 , pp. 40 - 43
Copyright
Copyright © Materials Research Society 1995

Access options

Get access to the full version of this content by using one of the access options below. (Log in options will check for institutional or personal access. Content may require purchase if you do not have access.)

References

1.Fletcher, N.H. and Rossing, T.D., The Physics of Musical Instruments (Springer-Verlag, New York, 1991).CrossRefGoogle Scholar
2.Rossing, T.D. and Sathoff, H.J., “Modes of Vibration and Sound Radiation from Tuned Handbells,” J. Acous. Soc. Am. 68 (1980) p. 1600.CrossRefGoogle Scholar
3.Rossing, T.D., “Acoustics of Bells,” Am. Sci. 72 (1984) p. 440.Google Scholar
4.Rossing, T.D. and Russell, D.A., “Laboratory Observation of Elastic Waves in Solids,” Am. J. Phys. 58 (1990) p. 1153.CrossRefGoogle Scholar
5.Powell, R.L. and Stetson, K.A., “Interferometric Vibration Analysis by Wavefront Reconstruction,” J. Opt. Soc. Am. 55 (1965) p. 1593.CrossRefGoogle Scholar
6.Rossing, T.D. and Mansell, E.R., “Acoustics of Bass Handbells,” J. Acous. Soc. Am. 93 (1993) p. 2382.CrossRefGoogle Scholar
7.Skudrzyk, E., Simple and Complex Vibratory Systems (The Pennsylvania State University Press, University Park, PA, 1968).Google Scholar
8.Rossing, T.D. and Perrin, R., “Vibration of Bells,” Appl. Acous. 20 (1987) p. 41.CrossRefGoogle Scholar
9.Cremer, L. and Heckl, M., Structure-Borne Sound (Springer-Verlag, Berlin, 1988).CrossRefGoogle Scholar