Hostname: page-component-586b7cd67f-dlnhk Total loading time: 0 Render date: 2024-11-26T03:32:25.811Z Has data issue: false hasContentIssue false

Analysis of Growing Films of Complex Oxides by RHEED

Published online by Cambridge University Press:  29 November 2013

Get access

Extract

The majority of sophisticated ultra-high-vacuum (UHV) systems for deposition of thin films, such as molecular beam epitaxy (MBE) machines, contain some kind of electron diffraction apparatus which is used to scrutinize the surface structure of the film while it is grown. Reflection high energy electron diffraction (RHEED) is probably the most frequently employed configuration. An excellent introduction to RHEED, including a treatment of electron diffraction, reciprocal-space description, reflection from imperfect surfaces, etc., was recently published in the MRS Bulletin by Lagally and Savage. Hence, we will not review these basics here. Rather, we will assume the reader to be familiar with that article, and will refer to it as LS.

The materials discussed in LS include Si, Ge on Si, and GaAs. The applications of MBE for synthesis of semiconductor thin films and heterostructures are widely recognized. MRS has recently bestowed its greatest honor, the Von Hippel Award, to Alfred Y. Cho for his pioneering work on MBE synthesis of GaAs and its application to new devices.

In contrast, here we focus on complex oxides—cuprates, titanates, manganates, etc. This is a relatively new area of application for both MBE and RHEED. Actually, it was only after the discovery of high-temperature superconductivity (HTS) that many MBE systems were designed and built specifically for metallic oxide deposition. More recently, some of these machines have also been employed to synthesize other interesting oxides, for example, ferroelectrics and ferromagnets. In all these studies, RHEED has been the principal diagnostic tool and source of information about the growing film surface.

Type
In Situ, Real-Time Characterization of Thin-Film Growth Processes
Copyright
Copyright © Materials Research Society 1995

Access options

Get access to the full version of this content by using one of the access options below. (Log in options will check for institutional or personal access. Content may require purchase if you do not have access.)

References

1.Lagally, M.G. and Savage, D.E., MRS Bulletin XVIII (1) (1993) p. 24.CrossRefGoogle Scholar
2. See MRS Bulletin XIX (11) (1994) p. 60.Google Scholar
3.Eckstein, J.N.et al., MRS Bulletin XVIII (8) (1993) p. 27.Google Scholar
4.Eckstein, J.N., Bozovic, I., and Virshup, G.F., MRS Bulletin XIX (9) (1994) p. 44.CrossRefGoogle Scholar
5.Nakayama, Y.et al., Jpn. J. Appl. Phys. Lett. 28 (1989) p. 1,809; I. Tsukada and K. Uchinokura, Jpn. J. Appl. Phys. Lett. 30 (1991) p. 1,114; S. Watanabe, M. Kawai, and T. Hanada,Jpn. J. Appl. Phys. Lett. 29 (1990) p. 1,111; S. Yokoyama et al., Jpn. J. Appl. Phys. Lett. 30 (1990) p. 106; A. Tsukamoto et al., Jpn. J. Appl. Phys. Lett. 30 (1991) p. 830; I. Yoshida et al., Appl. Phys. Lett. 58 (1991) p. 654; S. Sakai et al., Physica C 185-9 (1991) p. 2,013.CrossRefGoogle Scholar
6.Nonaka, H.et al., Physica C 217 (1993) p. 280; J. Vac. Sci. Technol. A 11 (1993) p. 2,676.CrossRefGoogle Scholar
7.MRS Bulletin XIX (9) (1994) is a special issue devoted to crystal engineering of oxide films, edited by H. Koinuma.Google Scholar
8.Wong-Ng, W.K. (private communication) based on Rawn, C.J.et al., J. Am. Ceram. Soc. 77 (8) (1994) p. 2,173; R.S. Roth et al., in Ceramic Transactions, vol. 13, edited by K.M. Nair and E.A. Giess (American Chemical Society, Westerville, 1990) p. 23; Res. Natl. Inst. Stand. Technol. 95 (1990) p. 291; K. Shulze et al., Z. Metallkde. 836 (1990).Google Scholar
9.Bozovic, I.et al., J. Supercon. 7 (1994) p. 187.CrossRefGoogle Scholar
10.Howell, R.H.et al., in Oxide Superconductors: Physics and Nanoengineering, edited by Pavuna, D. and Bozovic, I. (SPIE, Bellingham, 1994) p. 182.CrossRefGoogle Scholar
11. A related advancement using neutral structural blocks has been performed by Locquet, J-P. and Machler, E., MRS Bulletin 19 (9) (1994) p. 39.CrossRefGoogle Scholar
12. A recent report by Lagues, M.et al., Science 262 (1993) p. 1,850 of trace superconductivity at 250 K in 2278 has aroused worldwide interest, but no other group has been able to duplicate this result. The highest Tc we measured in 2278 was around 60 K (see Reference 13).CrossRefGoogle Scholar
13.Bozovic, I., Eckstein, J.N., and Virshup, G.F., Physica C 235 (1994) p. 178.CrossRefGoogle Scholar
14.Jin, S.et al., J. Appl. Phys. Lett. 76 (1994) p. 6,929.Google Scholar
15.Chern, M.Y., Gupta, A., and Hussey, B.W., Appl. Phys. Lett. 60 (1992) p. 3,045.CrossRefGoogle Scholar
16.Koinuma, H.et al., Appl. Phys. Lett. 58 (1991) p. 2,027.CrossRefGoogle Scholar
17.Tabata, H.et al., Jpn. J. Appl. Phys. Lett. 28 (1989) p. 823; T. Matsumoto et al., Appl. Phys. Lett. 58 (1991) p. 2,039.CrossRefGoogle Scholar
18.Bodin, P., Sakai, S. and Kasai, Y., Jpn. J. Appl. Phys. Lett. 31 (1992) p. 949.CrossRefGoogle Scholar
19.Kamei, M.et al., Jpn. J. Appl. Phys. 31 (1992) p. 1,326; M. Kamei et al., J. Appl. Phys. 74 (1993) p. 436.CrossRefGoogle Scholar