The advantage that epitaxy offers the electronics and optoelectronics industries is that it allows the possibility of producing precisely controlled layers of very high crystal quality. Heteroepitaxy of different materials offers the promise of tailoring device layers in clever ways that nature did not intend. However unlike fruit juices, nature has made it difficult to epitaxially combine different materials. As the preceding articles have clearly pointed out, it is very difficult to obtain smooth epitaxial layers that are free both of defects and strain when there is a lattice mismatch between the layers and their substrates.

As already discussed in this issue, a uniform network of dislocations at the interface between a flat, uniform epitaxial layer and its substrate can completely relieve strain in the majority of the epitaxial layer. This would be a satisfactory situation for many devices so long as the active region of the device could be kept away from the interface. The problem is how to introduce the dislocations in an appropriate way. When an epitaxial layer has a larger lattice parameter than the underlying substrate, a misfit dislocation running along the interface represents a plane of atoms that has been removed from the epitaxial layer. (One would insert a plane of atoms if the epitaxial lattice parameter was smaller. For simplicity however we will continue to assume that the epitaxial layer has a larger lattice parameter.) It is not possible for a whole half plane of atoms, bounded by the dislocation at the interface and the substrate edges along the two sides, to be removed at once. The boundary between where the extra plane of atoms has been removed and where the epitaxial layer has not relaxed yet will represent a threading dislocation. This threading dislocation would continue to move as the size of the misfit dislocation along the interface grows. Ideally it moves all the way out to the substrate edge and vanishes there while the misfit dislocation along the interface would end up extending from one side of the substrate to the other. However other dislocations and other kinds of defects can effectively pin the threading dislocation resulting in an epitaxial layer with many threading dislocations. Unfortunately these threading dislocations are generally detrimental to most kinds of devices. It is precisely this high density of threading dislocations that limits applications of many heteroepitaxial layers.