Hostname: page-component-78c5997874-4rdpn Total loading time: 0 Render date: 2024-11-20T03:26:34.290Z Has data issue: false hasContentIssue false
  • English
  • Français

Developments in CVD-Diamond Synthesis During the Past Decade

Published online by Cambridge University Press:  29 November 2013

James E. Butler  and
Henry Windischmann
Get access

Extract

The last decade and a half has seen an explosive growth in the synthesis of diamond materials by a variety of chemicalvapor-deposition (CVD) processes driven by both scientific curiosity and technological exploitation for diverse applications in the fields of hard coatings, tools, optics, passive and active electronics, thermal management, corrosion protection, and radiation detection. Beginning in the 1980s, micron-sized diamond particles were reported by a few groups using hot filaments and a seemingly magical (alchemical) recipe of hydrocarbons and hydrogen. Now near the end of the 1990s, the basic science of diamond growth by CVD is well-understood. Diverse plasma- and thermal-based techniques have been developed for deposition of diamond. Polycrystalline films several mm thick and over 12 in. (30 cm) in diameter are a reality. Many companies are commercializing a wide range of products, and the cost of deposition has dropped by over three orders of magnitude. This article reviews these developments and highlights challenges for the future. It is organized along two themes: scientific advances and technological progress.

Type
Diamond Films: Recent Developments
Information
MRS Bulletin , Volume 23 , Issue 9 , September 1998 , pp. 22 - 27
Copyright
Copyright © Materials Research Society 1998

Access options

Get access to the full version of this content by using one of the access options below. (Log in options will check for institutional or personal access. Content may require purchase if you do not have access.)

References

1.Wilks, J. and Wilks, E., Properties and Applications of Diamond (Butterworth-Heinemann, Oxford, 1991).Google Scholar
2.Field, J.E., ed., The Properties of Natural and Synthetic Diamond (Academic Press, London, 1992).Google Scholar
3.Davis, R.F., ed., Diamond Films and Coatings (Noyes Publications, Park Ridge, NJ, 1993).Google Scholar
4.Lettington, A. and Steeds, J.W., eds., Thin Film Diamond (Chapman & Hall, London, 1994).CrossRefGoogle Scholar
5.Spear, K.E. and Dismukes, J.P., eds., Synthetic Diamond (John Wiley & Sons, New York, 1994).Google Scholar
6.Prelas, M.A., Popovici, G., and Bigelow, L.K., eds., Handbook of Industrial Diamonds and Diamond Films (Marcel Dekker, New York, 1998).Google Scholar
7.Angus, J.C., in Synthetic Diamond, Chapter 2, edited by Spear, K.E. and Dismukes, J.P. (John Wiley & Sons, New York, 1994) p. 21.Google Scholar
8.Fedoseev, D.V., Synthetic Diamond Chapter 3, p. 41.Google Scholar
9.Setaka, N., Synthetic Diamond Chapter 4, p. 57.Google Scholar
10. See multiple papers on the hot-filament microwave plasma and direct-current arc-jetplasma-driven deposition of diamond films in the following: Saito, S., Fukunaga, O., and Yoshikawa, M., eds., Proc. 1st Int. Conf. on New Diamond Science and Technology (KTK Scientific/Terr a Scientific, Tokyo, 1988);Google Scholar
Badzian, A.R. and DeVries, R.C., Mater. Res. Bull. 23 (1988) p. 385.CrossRefGoogle Scholar
11.Pehrsson, P.E., Celii, F.G., and Butler, J.E., in Diamond Films and Coatings, Chapter 3, edited by Davis, R.F. (Noyes Publications, Park Ridge, NJ, 1993) p. 68.Google Scholar
12.Thorsheim, H.R. and Butler, J.E., in Synthetic Diamond, Chapter 7, edited by Spear, K.E. and Dismukes, J.P. (John Wiley & Sons, New York, 1994) p. 193.Google Scholar
13.Goodwin, D.G. and Butler, J.E., in Handbook of Industrial Diamonds and Diamond Films, Chapter 11, edited by Prelas, M.A., Popovici, G., and Bigelow, L.K. (Marcel Dekker, New York, 1998) p. 527.Google Scholar
14.Butler, J.E. and Woodin, R.L., Philos. Trans. R. Soc. London 342 (1993) p. 209.Google Scholar
15.Bachmann, P.K., in Handbook of Industrial Diamonds and Diamond Films, Chapter 21, edited by Prelas, M.A., Popovici, G., and Bigelow, L.K. (Marcel Dekker, New York, 1998) p. 821.Google Scholar
16.Clausing, R.E., Handbook of Industrial Diamonds and Diamond Films. Chapter 2, p. 19.Google Scholar
17.Butler, J.E., Thorns, B.D., McGonigal, M., Russell, J.N. Jr., and Pehrsson, P.E., “Hydrogen Chemistry on Diamond Surfaces,” in “Wide Band-Gap Electronic Materials,” NATO Meeting/NATO ASI Series Volume 3/1, Proc. NATO Advanced Workshop on Wide Band-Gap Semiconductors, edited by Prelas, M.A., Gielisse, P., Popovic, G., Spitsyn, B.V., and Stacy, T. (Kluwer Academic Publishers, Dordrecht, Netherlands, 1995) p. 105.Google Scholar
18.D'Evelyn, M.P., in Handbook of Industrial Diamonds and Diamond Films, Chapter 4, edited by Prelas, M.A., Popovici, G., and Bigelow, L.K. (Marcel Dekker, New York, 1998) p. 89.Google Scholar
19.Collins, AT., Handbook of Industrial Diamonds and Diamond Films. Chapter 1, p. 1.Google Scholar
20.Zeitsev, A.M., Handbook of Industrial Diamonds and Diamond Films. Chapter 7, p. 227.Google Scholar
21.McNamara-Rutledge, K. and Gleason, K.K., Handbook of Industrial Diamonds and Diamond Films. Chapter 9, p. 413.Google Scholar
22.Liu, H. and Dandy, D.S., Diamond Chemical Vapor Deposition (Noyes Publications, Park Ridge, NJ, 1995).Google Scholar
23.Harris, S.J., Appl. Phys. Lett. 56 (1990) p. 2298.CrossRefGoogle Scholar
24.Coltrin, ME. and Dandy, D., J. Appl. Phys. 74 (1993) p. 5803.CrossRefGoogle Scholar
25.Angus, J.C., in Proc. 1st Int. Symp. on Diamond and Diamond-like Films, edited by Dismukes, J.P., Purdes, A.J., Meyerson, B.S., Moustakas, T.D., Spear, K.E., Ravi, K.V., and Yoder, M. (The Electrochemical Society, Pennington, NJ, 1989) p. 1.Google Scholar
26.Goodwin, D.J., J. Appl. Phys. 74 (1993) p. 6888.CrossRefGoogle Scholar
27.J. Appl. Phys. p. 6895.Google Scholar
28.Patterson, D.E., Bai, B.J., Chu, C.J., Hauge, R.H., and Margrave, J.L., in New Diamond Science and Technology, edited by Messier, R., Glass, JT., Butler, J.E., and Roy, R. (Materials Research Society, Pittsburgh, 1991) p. 433.Google Scholar
29.Hirose, Y., in Proc. 1st Int. Conf. on New Diamond Science and Technology, edited by Saito, S., Fukunaga, O., and Yoshikawa, M. (KTK Scientific/Terra Scientific, Tokyo, 1988) p. 38.Google Scholar
30.Hirose, Y. and Terasawa, Y., Jpn. J. Appl. Phys. 25 (6) (1986) p. L519.CrossRefGoogle Scholar
31.Glumac, N.G. and Goodwin, D.G., Thin Solid Films 212 (1991) p. 122.CrossRefGoogle Scholar
32.Gruen, D.M., Liu, S., Krauss, A.R., Luo, J., and Pan, X., Appl. Phys. Lett. 64 (1994) p. 1502.CrossRefGoogle Scholar
33.Gruen, D.M., Zuiker, C.D., Krauss, A.R., and Pan, X., J. Vac. Sci. Technol. A 13 (1995) p. 1628.CrossRefGoogle Scholar
34.Mistry, P., Turchan, M.C., Liu, S., Granse, G.O., Baurmann, T., and Shara, M.G., Innov. Mater. Res. 1 (2) (1996) p. 193.Google Scholar
35.Badzian, A., Weiss, B.L., Roy, R., Badzian, T., Drawl, W., Mistry, P., and Turchan, M.C., Diamond Rel. Mater. in press.Google Scholar
36.Simpson, M., Defense Advanced Research Projects Agency Contract No. MDA 972-93-C-0009, Final Report, 1996.Google Scholar
37.Celii, F.G. and Butler, J.E., Appl. Phys. Lett. 54 (1989) p. 1031.CrossRefGoogle Scholar
38.Celii, F.G., Thorsheim, H.R., Butler, J.E., Piano, L.S., and Pinneo, J.M., Appl. Phys. Lett. 68 (1990) p. 3814.Google Scholar
39.Butler, J.E., Celii, F.G., Oakes, D.B., Hanssen, L.M., Carrington, W.A., and Snail, K.A., High Temp. Sci. 27 (1990) p. 183.Google Scholar
40.Hsu, W., Appl. Phys. Lett. 59 (1991) p. 1427.CrossRefGoogle Scholar
41.Connell, L.L., Chu, H-N., Fleming, J.W., Vestyck, D.J., and Butler, J.E., J. Appl. Phys. 79 (6) (1995) p. 3622.CrossRefGoogle Scholar
42.Martin, L.R., J. Appl. Phys. 70 (1991) p. 5667.CrossRefGoogle Scholar
43.Fabis, P. and Gomes, M., personal communication, 1996.Google Scholar
44.Gray, K.J. and Fabis, P.M., Diamond Rel. Mater. 6 (1997) p. 191.CrossRefGoogle Scholar
45.Harris, D.C., Report No. NAWCWPNS TP8210 (Naval Air Warfare Center, China Lake, CA, 1992).Google Scholar