Hostname: page-component-586b7cd67f-vdxz6 Total loading time: 0 Render date: 2024-11-29T20:05:10.807Z Has data issue: false hasContentIssue false
  • English
  • Français

Coatings for TiAl

Published online by Cambridge University Press:  29 November 2013

Shigeji Taniguchi
Get access

Extract

The intermetallic compound, TiAl, and materials based on it have been receiving considerable attention because of their high specific strengths at elevated temperatures. Their mechanical properties are being extensively studied, with a view to application in aircraft or automobile engines. Before using these materials at elevated temperatures, their interactions with the environment should be investigated and suitable measures taken to overcome any degradation. It has, however, been reported that protective Al2O3 scales do not form when TiAl is exposed to an oxidizing atmosphere in spite of its high aluminum content. The formation of an A12O3 scale, or at least a scale containing a continuous A12O3 layer, is a prerequisite for providing sufficient protection. Therefore, much effort has been expended in choosing suitable alloying additions. However, relatively less effort has been devoted to surface coatings on such materials. The purpose of the alloying addition is two-fold: to improve mechanical properties, particularly ductility, and to improve oxidation resistance. However, compatible alloying elements are rare. For instance, some elements which improve the ductility, e.g., vanadium, chromium, and manganese, lower the oxidation resistance. Accordingly, a reasonable concept for the designer is to add effective alloying elements to improve the mechanical properties and to apply a coating to provide protection against the environment. For improved reliability, elements that improve the oxidation resistance can also be added to increase the protection unless they reduce the required mechanical properties.

Type
Corrosion and Coating
Information
MRS Bulletin , Volume 19 , Issue 10 , October 1994 , pp. 31 - 34
Copyright
Copyright © Materials Research Society 1994

Access options

Get access to the full version of this content by using one of the access options below. (Log in options will check for institutional or personal access. Content may require purchase if you do not have access.)

References

1.Lipsitt, H.A., Schechtman, D., and Schafrik, R.E., Met. Trans. 6A (1975) p. 1991.CrossRefGoogle Scholar
2.Kawabata, T., Kanai, T., and Izumi, O., Acta Metall. 33 (1985) p. 1355.CrossRefGoogle Scholar
3.Proc. Int. Symp. Intermetallic Compounds (JIMIS-6), edited by Izumi, O. (1991).Google Scholar
4.Kasahara, K., Hashimoto, K., Doi, H., and Tsujimoto, T., J. Jpn. Inst. Met. 53 (1989) p. 58.CrossRefGoogle Scholar
5.Umakoshi, Y., Yamaguchi, M., Sakagami, T., and Yamane, T., J. Mater. Sci. 24 (1989) p. 1599.CrossRefGoogle Scholar
6.Taniguchi, S., Shibata, T., and Itoh, S., Mater. Trans. JIM 32 (1991) p. 151.CrossRefGoogle Scholar
7.Becker, S., Rahmel, A., Schorr, M., and Schütze, M., Oxid. Met. 38 (1992) p. 425.CrossRefGoogle Scholar
8.Kasahara, K., Hashimoto, K., Doi, H., and Tsujimoto, T., J. Jpn. Inst. Met. 54 (1990) p. 948.CrossRefGoogle Scholar
9.Ikematsu, Y., Hanamura, T., Morikawa, H., Tanino, M., and Takamura, J., in Proc. Int. Symp. Intermetallic Compounds (JIMIS-6), edited by Izumi, O. (1991) p. 191.Google Scholar
10.Anada, H. and Shida, Y., in Proc. Int. Symp. Intermetallic Compounds (JIMIS-6), edited by Izumi, O. (1991), p. 731.Google Scholar
11.Wallace, T.A., Clark, R.K., Sankaran, S.N., and Wiedemann, K.E., TMS Proc. Environmental Effects on Advanced Materials, edited by Jones, R.H. and Ricker, R.E. (1991) p. 79.Google Scholar
12.McKee, D.W. and Huang, S.C., Corros. Sci. 33 (1992) p. 1899.CrossRefGoogle Scholar
13.Stringer, J., Corros. Sci. 10 (1970) p. 513.CrossRefGoogle Scholar
14.Taniguchi, S., Trans. ISIJ 25 (1985) p. 3.CrossRefGoogle Scholar
15.Kofstad, P., Non-stoichiometry, Diffusion, and Electrical Conductivity in Binary Metal Oxides (Robert E. Krieger Publishing, Florida, 1983) p. 137.Google Scholar
16.Subrahmanyam, J. and Annapurna, J., Oxid. Met. 26 (1986) p. 275.CrossRefGoogle Scholar
17.Takei, A. and Ishida, A., Rep. 123rd Committee JSPS 31 (1990) p. 327.Google Scholar
18.Mabuchi, H., Asai, T., and Nakayama, Y., Scripta Metall. 23 (1989) p. 685.CrossRefGoogle Scholar
19.Yoshihara, M., Suzuki, T., and Tanaka, R., Tetsu-to-Hagané 77 (1991) p. 274.CrossRefGoogle Scholar
20.Kasahara, K., Takei, A., and Yamashita, T., J. Surf. Finis. Soc. Jpn. 45 (1994) p. 428.CrossRefGoogle Scholar
21.Furukawa, H., 86th JSCE Seminar (1991) preprint, p. 54.Google Scholar
22.Perkins, R.A., Chiang, K.T., and Meier, G.H., Scripta Metall. 21 (1987) p. 1505.CrossRefGoogle Scholar
23.Maki, K., Shioda, M., Sayashi, M., Shimizu, T., and Isobe, S., Mater. Sci. Eng. A 153 (1992) p. 591.CrossRefGoogle Scholar
24.Shimizu, T., Iikubo, T., and Isobe, S., Mater. Sci. Eng. A 153 (1992) p. 602.CrossRefGoogle Scholar
25.McKee, D.W. and Luthra, K.I., Surf. Coating Technol. 56 (1993) p. 109.CrossRefGoogle Scholar
26.Taniguchi, S., Shibata, T., Asanuma, N., Lou, H., Wang, F., and Wu, W., Oxid. Met. 39 (1993) p. 457.CrossRefGoogle Scholar
27.Taniguchi, S., Asanuma, N., Shibata, T., Wang, F., Lou, H., and Wu, W., J. Jpn. Inst. Met. 57 (1993) p. 781.CrossRefGoogle Scholar
28.Taniguchi, S., Shibata, T., Yamada, T., Liu, X., and Zou, S., ISIJ Int. 33 (1993) p. 869.CrossRefGoogle Scholar
29.Liu, X., Yu, Y., Zhen, Z., Huang, W., Zou, S., Jin, Z., Chang, M., Xu, S., Taniguchi, S., Shibata, T., and Nakamura, K., Surf. Coating Technol. 46 (1991) p. 227.Google Scholar
30.Taniguchi, S., Shibata, T., and Katoh, N., J. Jpn. Inst. Met. 57 (1993) p. 666.CrossRefGoogle Scholar
31.Taniguchi, S., Shibata, T., and Takeuchi, K., Mater. Trans. JIM 32 (1991) p. 299.CrossRefGoogle Scholar
32.Yoshimura, M., Urushihara, W., Yashima, M., and Kakihana, M., Proc. 3rd Jpn. Int. SAMPE Symp. (1993) p. 1471.Google Scholar
33.Kobayashi, E., Yoshihara, M., and Tanaka, R., J. Jpn. Inst. Met. 53 (1989) p. 251.CrossRefGoogle Scholar
34.Taniguchi, S., Shibata, T., and Sakon, S., Zairyo-to-Kankyo 41 (1992) p. 453.CrossRefGoogle Scholar
35.Taniguchi, S. and Shibata, T., Proc. 3rd Jpn. Int. SAMPE Symp. (1993) p. 1461.Google Scholar
36.Taniguchi, S., Shibata, T., and Murakami, A., Oxid. Met., 41 (1994) p. 103.CrossRefGoogle Scholar
37.Taniguchi, S., Shibata, T., Murakami, A., and Chihara, K., Oxid. Met., in press.Google Scholar