Hostname: page-component-586b7cd67f-dsjbd Total loading time: 0 Render date: 2024-11-22T07:24:38.534Z Has data issue: false hasContentIssue false

Sintering Behavior, Microstructure and Microwave Dielectric Properties of Novel Temperature Stable Li3Mg2NbO6–tio2 Composite Ceramics

Published online by Cambridge University Press:  15 January 2019

Gang Wang*
Affiliation:
State Key Laboratory of Electronic Thin Films and Integrated Devices, University of Electronic Science and Technology of China, Chengdu610054, China
Dainan Zhang*
Affiliation:
State Key Laboratory of Electronic Thin Films and Integrated Devices, University of Electronic Science and Technology of China, Chengdu610054, China
Huaiwu Zhang*
Affiliation:
State Key Laboratory of Electronic Thin Films and Integrated Devices, University of Electronic Science and Technology of China, Chengdu610054, China
*
*Corresponding author: Email address: [email protected](G. W.);[email protected](D. Z.)
*Corresponding author: Email address: [email protected](G. W.);[email protected](D. Z.)
Get access

Abstract

A novel series of temperature stable Li3Mg2NbO6–xTiO2 ceramics were prepared by the conventional solid-state route. The effects of TiO2 addition on the sintering behavior, phase composition, microstructure and microwave dielectric properties were investigated systematically. The dense microstructure could be obtained in low TiO2 content (x=0.1) samples sintered at 1100 °C. The dielectric constant εr was attributed to the bulk density and TiO2 content. The variation in Q×f values is related to the bulk density, and improved values could be obtained for Li3Mg2NbO6–0.1TiO2 ceramics. The quality factor (Q×f) had a maximum for x=0.1 and the temperature coefficient of resonant frequency (τf) value shifted towards positive direction with the increase of TiO2 addition. Notably, Li3Mg2NbO6–0.1TiO2 ceramics sintered at 1100 °C possessed excellent microwave dielectric properties: εr=15, Q×f =74,000 GHz(9.93GHz), τf= −3.4 ppm/°C, which made the ceramics as promising low loss and temperature stable candidates for millimeter-wave applications.

Type
Articles
Copyright
Copyright © Materials Research Society 2019 

Access options

Get access to the full version of this content by using one of the access options below. (Log in options will check for institutional or personal access. Content may require purchase if you do not have access.)

References

Yao, G. G., Liu, P., and Zhang, H. W., J. Am. Ceram. Soc. 96, 1691 (2013)CrossRefGoogle Scholar
Zhou, D., Wang, H., Pang, L. X., Yao, X., and Wu, X. G., J. Eur. Ceram. Soc. 29, 1543 (2009)CrossRefGoogle Scholar
Zuo, H., Tang, X., Zhang, H., Lai, Y., Jing, Y., and Su, H., Ceram Int. 43, 8951 (2017)CrossRefGoogle Scholar
Zhang, S., Su, H., Zhang, H., Jing, Y., and Tang, X., Ceram Int. 42, 15242 (2016)CrossRefGoogle Scholar
Yuan, L. L., and Bian, J. J., Ferroelectrics. 387, 123 (2009)CrossRefGoogle Scholar
Zhao, Y. G., and Zhang, P., J. Alloy. Compd. 658, 744 (2016)CrossRefGoogle Scholar
Guo, J., Zhou, D., Wang, H., and Yao, X., J. Alloy. Compd. 509, 5863 (2011)CrossRefGoogle Scholar
Zheng, H., Yu, S., Li, L., Lyu, X., Sun, Z., and Chen, S., J. Eur. Ceram. Soc. 37, 4661 (2017)CrossRefGoogle Scholar
Yoon, S. H., Choi, G.-K., Kim, D.-W., Cho, S.-Y., and Hong, K. S., J. Eur. Ceram. Soc. 27, 3087 (2007)CrossRefGoogle Scholar
Zhang, P., Xie, H., Zhao, Y., Zhao, X., and Xiao, M., J. Alloy. Compd. 690, 688 (2017)CrossRefGoogle Scholar
Cho, I.-S., kang, S.-K., Kim, D.-W., and Hong, K.-S., J. Eur. Ceram. Soc. 26, 2007 (2006)CrossRefGoogle Scholar