Hostname: page-component-cd9895bd7-gxg78 Total loading time: 0 Render date: 2024-12-23T13:11:27.006Z Has data issue: false hasContentIssue false

Hydration of Eurobitum bituminized waste under free swelling conditions: osmosis-induced swelling and NaNO3 leaching

Published online by Cambridge University Press:  16 February 2017

Nele Bleyen*
Affiliation:
W&D Expert Group, SCK•CEN, Boeretang 200, 2400 Mol, Belgium
Steven Smets
Affiliation:
W&D Expert Group, SCK•CEN, Boeretang 200, 2400 Mol, Belgium
Wim Verwimp
Affiliation:
W&D Expert Group, SCK•CEN, Boeretang 200, 2400 Mol, Belgium
Katrien Hendrix
Affiliation:
W&D Expert Group, SCK•CEN, Boeretang 200, 2400 Mol, Belgium
Xavier Sillen
Affiliation:
ONDRAF/NIRAS, Avenue des Arts 14, 1210 Brussels, Belgium
Elie Valcke
Affiliation:
W&D Expert Group, SCK•CEN, Boeretang 200, 2400 Mol, Belgium
*
Get access

Abstract

In Belgium, Eurobitum bituminized radioactive waste is an important intermediate-level long-lived waste form that contains, besides bitumen and radionuclides, large amounts of soluble salts (mainly NaNO3). Geological disposal in a water-saturated sedimentary formation will induce swelling of Eurobitum due to water uptake by the hygroscopic salts embedded in a highly efficient semi-permeable bitumen membrane. Initially, while there is still free space in the primary waste containers, free swelling will occur. To improve our understanding of the water uptake processes under free swelling conditions, water uptake and leaching tests are being performed in which inactive Eurobitum was contacted at the top with 0.1 M KOH (simplified representation of young cement water) without effective stress on the sample. Under these test conditions, the evolution of the water uptake and NaNO3 leaching processes shows several stages: (1) initial fast ingress of water into and leaching of NaNO3 from pores close to the surface; (2) slower progression of the hydration front, the swelling and the leaching of NaNO3, but behaving linearly with the square root of time, indicating that these processes are controlled by diffusion; (3) after more than 2 to 3 years, the leaching, hydration and swelling rates re-increase, attributed to the formation of interconnecting pores and (micro)cracks in the bitumen matrix in response to its increasing deformation.

Type
Articles
Copyright
Copyright © Materials Research Society 2017 

Access options

Get access to the full version of this content by using one of the access options below. (Log in options will check for institutional or personal access. Content may require purchase if you do not have access.)

References

REFERENCES

Morgan, P. and Mulder, A. (1995). Vol. ISBN-0–95 16625-1-1. Shell Bitumen.Google Scholar
Demonie, M. (1996). Note Belgoprocess reference AFB-96-390. Belgoprocess, Dessel, Belgium.Google Scholar
Smith, P., et al. (2009). SFC1 level 4 report - NIROND-TR 2009-14 E. ONDRAF/NIRAS, Brussels, Belgium.Google Scholar
Wacquier, W. and Humbeeck, H. V. (2009). ONDRAF/NIRAS Report ref. 2009-0146. ONDRAF/NIRAS, Brussels, Belgium.Google Scholar
Sneyers, A. and Van Iseghem, P. (1998). Proc. MRS Symp., 506: 565572.Google Scholar
Valcke, E., et al. (2010). J. Nucl. Mat., 406: 304316.Google Scholar
Marien, A., et al. (2013). J. Nucl. Mat., 432: 348365.Google Scholar
Valcke, E., et al. (2000). Proc.. of Safewaste Conf., 2: 562573.Google Scholar
Marien, A., et al. (2012). Microsc. Microanal., 18: 11631180.Google Scholar
Sercombe, J., et al. (2006). J. Nucl. Mat., 349: 96106.Google Scholar
Gwinner, B., et al. (2006). J. Nucl. Mat., 349: 107118.Google Scholar
Lefebvre, X., et al. (2006). Proc. MRS Symp., 932: 681688.Google Scholar