Hostname: page-component-78c5997874-s2hrs Total loading time: 0 Render date: 2024-11-06T04:15:30.813Z Has data issue: false hasContentIssue false

Experimental Investigations of Ni Nanoparticle-Polyurethane Acrylic Composite for Electrical Conductivity Enhancement

Published online by Cambridge University Press:  15 July 2019

Adrian Goodwin
Affiliation:
Department of Nanoengineering, Joint School of Nanoscience and Nanoengineering, North Carolina A&T State University, Greensboro, NC, United States.
Ajit D. Kelkar*
Affiliation:
Department of Nanoengineering, Joint School of Nanoscience and Nanoengineering, North Carolina A&T State University, Greensboro, NC, United States.
Ram V. Mohan
Affiliation:
Department of Nanoengineering, Joint School of Nanoscience and Nanoengineering, North Carolina A&T State University, Greensboro, NC, United States.
*
Get access

Abstract

Conductive composites are being considered for use in applications such as electromagnetic shielding. Prior work has shown correlation of electrical conductivity to the microstructure of corresponding composite. In the present paper, composites consisting of polyurethane acrylic and dispersed nickel nanoparticles were fabricated, and tested for their electrical conductivity. In the fabrication process, half of the suspensions were agitated by sonication and half were not. Correlations between electrical conductivity and composite microstructural details are presented. These correlations show an optimum concentration of nickel nanoparticles that result in maximum conductivity enhancement. In addition, sonicating the suspensions increased conductivity of resulting nanocomposites. Scanning Electron Microscopy (SEM), Energy Dispersive Spectroscopy (EDS) images were used to estimate surface concentration and distribution of Nickel nanoparticles, and were correlated to electrical conductivity measurements. Parameters such as number of particles in contact and junction distance between the nano particles in the composites are suggested as a way of enhancing electrical conductivity.

Type
Articles
Copyright
Copyright © Materials Research Society 2019 

Access options

Get access to the full version of this content by using one of the access options below. (Log in options will check for institutional or personal access. Content may require purchase if you do not have access.)

References

REFERENCES

Conductive Composites LLC: Conductive Composites (2019). Available at: http://www.conductivecomposites.com. (accessed:11-April-2019).Google Scholar
Haughn, M., Rouse, M.: EM shielding (electromagnetic shielding) (2019). Available at: https://whatis.techtarget.com/definition/EM-shielding-electromagnetic-shielding. (Accessed 11 April 2019).Google Scholar
Ott, H.W., Electromagnetic Compatibility Engineering. (John Wiley, &Sons, Hoboken, NJ, 2009)10.1002/9780470508510CrossRefGoogle Scholar
Paul, C.R., Introduction to Electromagnetic Compatibility, 2nd ed. (Wiley-Interscience, Hoboken, NJ, 2006).Google Scholar
LearnEMC: LearnEMC-Practical EM Shielding (2019). Available at http://learnemc.com/practical-em-shielding. (accessed 11-April-2019)Google Scholar
US Research Nano-materials Incorporated: Nickel Nanopowder/Nanoparticles (Ni, 99.9%, 70nm, metal basis) (2019). Available at http://www.us-nano.com/inc/sdetail/168. (accessed: 11-April-2019).Google Scholar
Rasband, W.S., ImageJ, (2018). Available at: https://imagej.nih.gov/ij/. (Accessed 29 May 2019)Google Scholar
Hansen, N., Adams, D. O., and Fullwood, D. T., Polymer Engineering & Science. 55, 549-557, (2015).10.1002/pen.23914CrossRefGoogle Scholar
Hansen, N. D., PhD. Thesis, The University of Utah, 2012.Google Scholar
Johnson, T. M., Fullwood, D. T., and Hansen, G., Composites Part B: Engineering, 43, 1155-1163 (2012).10.1016/j.compositesb.2011.09.014CrossRefGoogle Scholar
Romanov, V., Lomov, S. V., Swolfs, Y., Orlova, S., Gorbatikh, L., and Verpoest, I., Composites Science and Technology, 87, 126-134 (2013).10.1016/j.compscitech.2013.07.030CrossRefGoogle Scholar