Hostname: page-component-586b7cd67f-t7fkt Total loading time: 0 Render date: 2024-11-26T17:12:12.120Z Has data issue: false hasContentIssue false
  • English
  • Français

Effect of hardening heat treatment on the mechanical properties of a 17-4PH stainless steel foam

Published online by Cambridge University Press:  13 November 2018

Maxime Gauthier ,
Aurélien Katz ,
Antoine Maison ,
Cristian V. Cojocaru  and
Fabrice Bernier
Maxime Gauthier*
Affiliation:
National Research Council Canada, 75 de Mortagne Blvd, Boucherville, QC, Canada, J4B 6Y4
Aurélien Katz
Affiliation:
École Supérieure d’Ingénieurs en Matériaux (ESIREM), 9 Avenue Alain Savary, 21000Dijon, France
Antoine Maison
Affiliation:
École Supérieure d’Ingénieurs en Matériaux (ESIREM), 9 Avenue Alain Savary, 21000Dijon, France
Cristian V. Cojocaru
Affiliation:
National Research Council Canada, 75 de Mortagne Blvd, Boucherville, QC, Canada, J4B 6Y4
Fabrice Bernier
Affiliation:
National Research Council Canada, 75 de Mortagne Blvd, Boucherville, QC, Canada, J4B 6Y4
*
*Corresponding Author: [email protected] / (450) 641-5063
Get access

Abstract

This paper presents the results of a study on the impact of a precipitation hardening treatment on the mechanical properties of 17-4PH stainless steel open-cell foams produced using a powder-metallurgy-based process patented by the National Research Council Canada (NRC). Pre-alloyed powder was used to manufacture stainless steel (SS) foams with either medium or high porosity by changing the nature of the organic binder used to process the porous materials. Some of these were kept in the as-sintered state, while others were submitted to the H900 precipitation hardening treatment frequently prescribed for 17-4PH stainless steels.

Metallurgical and physical characterization was carried out on the resulting materials, along with mechanical testing at the micro (indentation testing) and macro (compressive testing) scales. It was found that the Medium-Porosity Foams (MPF) and High-Porosity Foams (HPF) had very different morphologies, the HPFs having a delicate porous structure featuring thin sintered walls with many openings (a.k.a. windows) between the main cells, while the MPFs exhibited much thicker walls with few windows connecting the larger pores. As expected from these foam morphologies, the mechanical properties of MPFs were much higher than those of the more porous and delicate HPF materials. For both foam types, the average mechanical properties were improved by the H900 treatment. A comparison with compressive properties of 17-4PH foams taken from the literature resulted in reasonable agreement. However, the large scatter observed on the average compressive properties of the NRC foams and the slightly different structure/composition of the literature materials mean that any comparison between these porous alloys must be interpreted with caution.

Keywords

metalfoam
Type
Articles
Information
MRS Advances , Volume 3 , Issue 62: International Materials Research Congress XXVII , 2018 , pp. 3655 - 3668
Copyright
Copyright © Materials Research Society 2018 

Access options

Get access to the full version of this content by using one of the access options below. (Log in options will check for institutional or personal access. Content may require purchase if you do not have access.)

References

Atwater, M.A., Guevara, L.N., Darling, K.A., and Tschopp, M.A., Adv. Eng. Mater. 20, paper no. 1700766 (2018).Google Scholar
Banhart, J., Adv. Eng. Mater. 15, 82-111 (2013).CrossRefGoogle Scholar
Lefebvre, Louis-Philippe, Banhart, John and Dunand, David C., Adv. Eng. Mater. 10, 775-787 (2008).CrossRefGoogle Scholar
Ashby, M.F., Evans, A., Fleck, N.A., Gibson, L.J., Hutchinson, J.W., Wadley, H.N.G., Metal Foams: A Design Guide (Butterworth Heinemann 2000).Google Scholar
Duarte, Isabel, Oliveira, Mónica, «Aluminium Alloy Foams: Production and Properties», in Powder Metallurgy, Katsuyoshi Kondoh, IntechOpen, DOI: 10.5772/34433. Available from: https://www.intechopen.com/books/powder-metallurgy/aluminium-alloys-foams-production-and-properties (2012).Google Scholar
Raj, S.V., Ghosnb, L.J., Lerch, B.A., Hebsur, M., Cosgriff, L.M., Fedor, J., Mater. Sci. Eng. A. 456, 305-316 (2007).CrossRefGoogle Scholar
Gülsoy, H. Ö. and German, R. M., Powder Metall ., 51, 350-353 (2008).CrossRefGoogle Scholar
Mutlu, I., Oktay, E., J. Porous Mater. 19, 433-440 (2012).CrossRefGoogle Scholar
Gibson, L.J., Annu. Rev. Mater. Sci. 30, 191-227 (2000).CrossRefGoogle Scholar
Lefebvre, L.P., Thomas, Y., «Method of Making Open Cell Material», US Patent 6,660,224 B2 (2003)Google Scholar
https://www.azom.com/article.aspx?ArticleID=6778Google Scholar
Kinetics, Inc. Technical Data Sheets, www.matweb.comGoogle Scholar
Douthett, J., « Heat Treating of Stainless Steels», in ASM Handbook , Volume 4: Heat Treating, ASM International, 769-792 (1991).Google Scholar