Hostname: page-component-745bb68f8f-b6zl4 Total loading time: 0 Render date: 2025-01-11T02:23:42.745Z Has data issue: false hasContentIssue false
  • English
  • Français

Controlling Thermoplastic Elastomer Optical Properties by Mechanical Processing

Published online by Cambridge University Press:  15 January 2019

Margaret Campbell ,
Paramjot Singh ,
Kunal Kate  and
Cindy K. Harnett
Margaret Campbell
Affiliation:
University of Kentucky College of Engineering, 351 Administration Dr, Lexington, KY40506, U.S.A.
Paramjot Singh
Affiliation:
University of Louisville J.B. Speed School of Engineering, 2210 S Brook St, Louisville, KY40208, U.S.A.
Kunal Kate
Affiliation:
University of Louisville J.B. Speed School of Engineering, 2210 S Brook St, Louisville, KY40208, U.S.A.
Cindy K. Harnett*
Affiliation:
University of Louisville J.B. Speed School of Engineering, 2210 S Brook St, Louisville, KY40208, U.S.A.
*
*(Email: [email protected])
Get access

Abstract

We demonstrate that the extrusion speed of thermoplastic urethane elastomer can modify its optical transmission by a factor of more than 100. Varying extrusion speed at constant temperature may tune optical properties along the axis of a filament, for example creating absorbent regions that are sensitive to length and diameter changes, surrounded by more transmissive segments that carry the sensor signal over long distances. Such waveguiding in a stretchable optical fiber requires a stretchable cladding with lower refractive index than the core. In experiments toward a rugged, stretchable fiber cladding, we investigated whether solvents could modify the outer structure of the filaments. Soaking the filaments in NMP (n-methyl-2-pyrrolidone), then stretching the filaments while the solvent dried, turned out to modify the filaments in a way that solvents alone did not, creating porosity and reducing the appearance of optical clarity.

Keywords

extrusionoptical propertiespolymer
Type
Articles
Information
MRS Advances , Volume 4 , Issue 23: Biomaterials and Soft Materials , 2019 , pp. 1341 - 1347
Copyright
Copyright © Materials Research Society 2019 

Access options

Get access to the full version of this content by using one of the access options below. (Log in options will check for institutional or personal access. Content may require purchase if you do not have access.)

References

Feijen, D. H. W., Mueller, J. L., Julia, J., Salvatella, D., and Riba, M. J., Thermoplastic Elastomers Conference, Brussels, Belgium, June 18-19, 2001, Paper14/1–Paper14/5.Google Scholar
Nielsen, L. E., J. Macromolecular Sci. Part C 3, 69-103 (1969).CrossRefGoogle Scholar
TPU Guide. Available at: http://www.huntsman.com/polyurethanes/Media%20Library/global/files/guide_tpu.pdf (accessed 20 December 2018).Google Scholar
Introduction to Polyurethanes: Thermoplastic Polyurethane. Available at: https://polyurethane.americanchemistry.com/polyurethanes/Introduction-to-Polyurethanes/Applications/Thermoplastic-Polyurethane/ (accessed 20 December 2018).Google Scholar
Siaotong, B. A. C., “Effects of fiber content and extrusion parameters on the properties of flax fiber-polyethylene composites,” PhD dissertation, University of Saskatchewan (2006).Google Scholar
Lu, G., Kalyon, D. M., Iskender, Y. and Yilgör, E., Polymer Eng. Sci. 43, 1863-1877 (2003).CrossRefGoogle Scholar
Verhoeven, V. W. A., Padsalgikar, A. D., Ganzeveld, K. J. and Janssen, L. P. B. M., Intl. Polymer Processing 21, 295-308 (2006).CrossRefGoogle Scholar
Harnett, C. K., Zhao, H. and Shepherd, R. F., Adv. Mater. Tech. 2, 1700087 (2017).CrossRefGoogle Scholar