Hostname: page-component-586b7cd67f-tf8b9 Total loading time: 0 Render date: 2024-11-22T20:34:38.586Z Has data issue: false hasContentIssue false
  • English
  • Français

Carboxylated Carbon Nanotubes/Polyethersulfone Hollow Fiber Mixed Matrix Membranes: Development and Characterization for Enhanced Gas Separation Performance

Published online by Cambridge University Press:  29 April 2018

Akshay Modi ,
Surendra Kumar Verma  and
Jayesh Bellare
Akshay Modi
Affiliation:
Department of Chemical Engineering, Indian Institute of Technology Bombay, Mumbai – 400076 (India)
Surendra Kumar Verma
Affiliation:
Department of Chemical Engineering, Indian Institute of Technology Bombay, Mumbai – 400076 (India)
Jayesh Bellare*
Affiliation:
Department of Chemical Engineering, Indian Institute of Technology Bombay, Mumbai – 400076 (India) Wadhwani Research Centre for Bioengineering, Indian Institute of Technology Bombay, Mumbai – 400076 (India) Centre for Research in Nanotechnology & Science, Indian Institute of Technology Bombay, Mumbai – 400076, India
*
*(Email: [email protected])
Get access

Abstract

Carboxylated carbon nanotubes (C or cCNTs) were incorporated in polyethersulfone hollow fiber membranes (P HFMs) to improve the gas separation performance, i.e., pure gas permeability and ideal gas selectivity. The developed CP HFMs showed the remarkable improvement in thermal stability and mechanical strength as compared to that of the pristine P HFMs. The pure gas permeability of CO2, CH4, O2, and N2 gases for the HFMs were measured at 3 bar feed pressure and room temperature. It was observed that the presence of cCNTs in HFMs significantly improved the CO2 and O2 permeability for CP HFMs by 10.8-and 11.7- fold, respectively, as compared to that measured for P HFMs. Furthermore, the ideal gas selectivity for CO2/CH4, O2/N2, and CO2/N2 gas pairs for CP HFMs was also remarkably enhanced by almost 8.6-, 10.7-and 9.9-times, respectively, as compared to that measured for P HFMs. CP HFMs exhibited gas separation performance better than or comparable to that of the literature-reported CNTs-based membranes. Remarkably, the gas separation performance of CP HFMs crossed Robeson’s 2008 upper bound curve for O2/N2 gas-pair and was almost closer to the upper bound curves drawn by Robeson in 2008 for CO2/CH4 and CO2/N2 gas pairs. The improved separation performance can be attributed to the presence of cCNTs in HFMs. Thus, the results obtained in this study clearly showed that the CP HFMs can potentially be used as a membrane material for the industrially relevant gas separations.

Keywords

2D materialsblendcarbon dioxidemembranemethane
Type
Articles
Information
MRS Advances , Volume 3 , Issue 52: Energy Materials and Technologies , 2018 , pp. 3103 - 3109
Copyright
Copyright © Materials Research Society 2018 

Access options

Get access to the full version of this content by using one of the access options below. (Log in options will check for institutional or personal access. Content may require purchase if you do not have access.)

References

REFERENCES

Robeson, L. M., J. Memb. Sci. 320, 390–400 (2008).CrossRefGoogle Scholar
Sanip, S., Ismail, A., Goh, P., Soga, T., Tanemura, M. and Yasuhiko, H., Sep. Purif. Technol. 78, 208–213 (2011).CrossRefGoogle Scholar
Biswal, B. P., Bhaskar, A., Banerjee, R. and Kharul, U. K., Nanoscale 7, 7291–7298 (2015).CrossRefGoogle Scholar
Modi, A., Verma, S. K. and Bellare, J., J. Colloid Interface Sci. 504, 86–100 (2017).CrossRefGoogle Scholar
Modi, A., Verma, S. K. and Bellare, J., J. Colloid Interface Sci. 514, 750–759 (2018).CrossRefGoogle Scholar
Modi, A., Bhaduri, B. and Verma, N., Ind. Eng. Chem. Res. 54, 5172–5178 (2015).CrossRefGoogle Scholar
Wang, T., Shen, J.-n., Wu, L.-g. and Van der Bruggen, B., J. Memb. Sci. 466, 338–347 (2014).CrossRefGoogle Scholar
Nayak, L., Rahaman, M., Khastgir, D. and Chaki, T. K., Polym. Bull. 67, 1029 (2011).CrossRefGoogle Scholar
Aroon, M., Ismail, A., Montazer-Rahmati, M. and Matsuura, T., Sep. Sci. Technol. 45, 2287–2297 (2010).CrossRefGoogle Scholar
Ismail, A., Rahim, N., Mustafa, A., Matsuura, T., Ng, B., Abdullah, S. and Hashemifard, S., Sep. Purif. Technol. 80, 20–31 (2011).CrossRefGoogle Scholar
Yu, B., Cong, H., Li, Z., Tang, J. and Zhao, X. S., J. Appl. Polym. Sci. 130, 2867–2876 (2013).CrossRefGoogle Scholar
Kiadehi, A. D., Rahimpour, A., Jahanshahi, M. and Ghoreyshi, A. A., J. Ind. Eng. Chem. 22, 199–207 (2015).CrossRefGoogle Scholar
Koops, G. H., Nolten, J. A. M., Mulder, M. H. V. and Smolders, C. A., J. Appl. Polym. Sci. 53(12), 1639–1651 (1994).CrossRefGoogle Scholar
Ahn, J., Chung, W. J., Pinnau, I. and Guiver, M. D., J. Membr. Sci. 314(1-2), 123–133 (2008).CrossRefGoogle Scholar
Kiadehi, A. D., Rahimpour, A., Jahanshahi, M. and Ghoreyshi, A. A., J. Ind. Eng. Chem. 22, 199–207 (2015).CrossRefGoogle Scholar
Nejad, M. N., Asghari, M. and Afsari, M., ChemBioEng Reviews 3, 276–298 (2016).CrossRefGoogle Scholar