Article contents
Preparation and Structural Analysis of Magnesium Oxide Aerogels
Published online by Cambridge University Press: 15 May 2017
Abstract
Magnesium oxide aerogels were made by sol-gel process using magnesium methoxide as precursor, methanol and deionized water as solvent with ethanol supercritical fluid drying. The influences of the different factors on the gel time and the specific surface area of magnesium oxide aerogels were studied, and the structure and morphology were characterized by Scanning Electron Microscopy (SEM), Transmission Electron Microscope (TEM) and X-ray diffraction (XRD), and the Small Angle X-ray Scatter (SAXS) was utilized to determine the fractural structure of the magnesium oxide aerogels. The results show that MgO aerogels belong to the typical mesoporous materials with rich network and highly developed pore structure, and the specific surface area is 904.9 m2/g, the apparent density is 0.055 g/cm3, the average pore size is 19.6 nm. The results of SAXS analysis show that the fractal dimension of the MgO aerogels is 2.32 in high q area which proves the existence of rough surface and pore fractal structure.
- Type
- Articles
- Information
- Copyright
- Copyright © Materials Research Society 2017
References
REFERENCES
- 1
- Cited by