Hostname: page-component-78c5997874-xbtfd Total loading time: 0 Render date: 2024-11-19T13:15:29.315Z Has data issue: false hasContentIssue false
  • English
  • Français

Non-Wetting Nickel-Cerium Oxide Composite Coatings with Remarkable Wear Stability

Published online by Cambridge University Press:  15 January 2018

Jason Tam ,
Uwe Erb  and
Gisele Azimi
Jason Tam*
Affiliation:
Department of Materials Science and Engineering, University of Toronto, 184 College Street, Toronto, Ontario M5S 3E4, Canada
Uwe Erb
Affiliation:
Department of Materials Science and Engineering, University of Toronto, 184 College Street, Toronto, Ontario M5S 3E4, Canada
Gisele Azimi
Affiliation:
Department of Materials Science and Engineering, University of Toronto, 184 College Street, Toronto, Ontario M5S 3E4, Canada Department of Chemical Engineering and Applied Chemistry, University of Toronto, 200 College Street, Toronto, Ontario M5S 3E5, Canada
*
*(Email: [email protected])
Get access

Abstract

Engineered non-wetting surfaces inspired by biological species are of interest in the industry due to their potential applications such as water repelling, self-cleaning, anti-icing, anti-corrosion, anti-fouling, and low fluid drag surfaces. However, the adoption of non-wetting surfaces in large scale industrial applications has been hampered by synthesis techniques that are not easily scalable and the limited long term stability and wear robustness of these surfaces in service. In this study, we demonstrate a simple, low cost, and scalable electrochemical technique to produce robust composite coatings with tunable non-wetting properties. The composite coatings are composed of an ultra-fine grain nickel matrix with embedded hydrophobic cerium oxide ceramic particles. Comprehensive characterization, including wetting property measurements, electron microscopy, focused ion beam analysis, hardness measurements, and abrasive wear testing were performed to establish the structure-property relationships for these materials. The grain refinement of the nickel matrix contributes to the high hardness of the composites. As a result of the bimodal CeO2 particle size, hierarchical roughness is present on the surface of the composite, leading to remarkable non-wetting properties, even after 720 m of abrasive wear.

Keywords

platingelectrodepositioncomposite
Type
Articles
Information
MRS Advances , Volume 3 , Issue 29: Biomaterials and Soft Materials , 2018 , pp. 1647 - 1651
Check for updates
Copyright
Copyright © Materials Research Society 2018 

Access options

Get access to the full version of this content by using one of the access options below. (Log in options will check for institutional or personal access. Content may require purchase if you do not have access.)

References

REFERENCES

Barthlott, W. and Neinhuis, C., Planta 202, 1 (1997).CrossRefGoogle Scholar
Nosonovsky, M. and Bhushan, B., Curr. Opin. Colloid Interface Sci. 14, 270 (2009).Google Scholar
Liu, H., Szunerits, S., Xu, W., and Boukherroub, R., ACS Appl. Mater. Interfaces 1, 1150 (2009).Google Scholar
Cao, L., Jones, A.K., Sikka, V.K., Wu, J., and Gao, D., Langmuir 25, 12444 (2009).CrossRefGoogle Scholar
Torresin, D., Tiwari, M.K., Del Col, D., and Poulikakos, D., Langmuir 29, 840 (2013).Google Scholar
Azimi, G., Dhiman, R., Kwon, H.-M., Paxson, A.T., and Varanasi, K.K., Nat. Mater. 12, 315 (2013).Google Scholar
Schlesinger, M. and Paunovic, M., editors, Modern Electroplating, Fifth Edition, 5th ed. (John Wiley & Sons, Inc, Hoboken, 2010).Google Scholar
Tam, J., Palumbo, G., and Erb, U., Materials (Basel). 9, 151 (2016).CrossRefGoogle Scholar
Tam, J., Palumbo, G., Erb, U., and Azimi, G., Adv. Mater. Interfaces 4, 1700850 (2017).Google Scholar
Tam, J., Jiao, Z., Lau, J., and Erb, U., Wear 374–375, 1 (2016).Google Scholar
Iacovetta, D., Tam, J., and Erb, U., Surf. Coatings Technol. 279, 134 (2015).Google Scholar