Corrosion, water radiolysis and microbial degradation will result in the generation of gas within repositories designed for the geological disposal of high-level radioactive waste. It is therefore crucial in the design of such facilities that the relevant mechanisms allowing gas migration through repository materials, both engineered barriers and clay-based candidate host rocks, are correctly identified. In Belgium, the Boom Clay represents a candidate host material for which the advective gas breakthrough characteristics and transport properties have been extensively tested and are well defined by numerous studies. The Boom Clay displays a significant capacity for self-sealing and both laboratory and field tests indicate that advective gas transport occurs not by visco-capillary flow, but instead through the formation of pressure-induced dilatant pathways. In this study, we present results from a gas injection test designed to demonstrate the presence of these features by injecting nanoparticulate tracers with helium gas into a sample of Boom Clay. The results provide conclusive evidence for the formation of transient, dilatant gas pathways within a candidate clay-based host rock. This technique provides a novel diagnostic tool for the identification of processes governing multi-phase flow, supporting robust long-term assessments of repository performance.

The current route in the UK for the conditioning and immobilization of most intermediate level waste for interim storage and geological disposal is to encapsulate in a cementitious matrix. However, certain waste materials, such as those containing reactive metals (e.g. uranium and aluminium), can corrode in the presence of the highly alkaline water in a cementitious environment. In their initial, undegraded form, polymeric materials can provide the appropriate, unreactive environment needed for the encapsulation of chemically active metals.

This study examines the effects of gamma radiation on the stability of six candidate polymeric encapsulants, including a vinyl ester styrene resin (VES) and five epoxy resin formulations. The polymeric encapsulants were exposed to radiation doses up to 10 MGy using AMEC's cobalt-60 gamma irradiation facility and their radiation and chemical stability characterized by the use of a number of analytical techniques. These included flexural and compressive testing, Fourier transform infrared spectroscopy (FTIR), gel fraction, leach testing and gas evolution. The results show that the most stable resin in terms of radiation resistance and chemical stability was VES. Most of the epoxy resin materials also showed good generic stability, but the FTIR analysis showed the potential for dose-rate effects in one formulation.

X-ray computed tomography augmented by elemental microanalysis has been used to characterize two drill cores from the Borrowdale Volcanic Group, west Cumbria, UK. Information about the three-dimensional (3D) distribution of mineral phases was obtained non-destructively, and regionsof interest were extracted for thin sectioning and elemental analysis. This revealed the presence of pyrite and other iron- and iron-titanium-bearing minerals. X-ray computed tomography is a very useful tool for 3D visualization, but the limitations of the tomography system used made it difficultto distinguish between regions with similar compositions, such as the different layers within the calcite veins. Methods by which these limitations might be overcome are briefly discussed.

Steady-state tremolite dissolution rates, at far-from-equilibrium conditions, were measured as a function of aqueous silica and magnesium activity, pH from 1.9 to 6.7, and temperature from 25 to 150ºC. Calcium is released from tremolite faster than either Mg or Si throughout most of the experiments even after these latter elements attained steady-state release rates. The preferential removal of Ca releases fine Mg-Si rich needle-like fibres from the tremolite, probably promoting its toxicity. In contrast, Mg was released in stoichiometric or near to stoichiometric proportion to Si once steady-state was attained. Measured steady-state tremolite dissolution rates based on Si release can be described using

where r+ signifies the BET surface area-normalized forward tremolite steady-state dissolution rate, AA refers to a pre-exponential factor = 6610–3 mol cm–2 s–1, EA designates an activation energy equal to 80 kJ mol–1, R represents the gas constant, T denotes absolute temperature, and ai refers to the activity of the subscripted aqueous species. This rate expression is consistent with tremolite dissolution rates at acidic pH being controlled by the detachment of partially liberated silica tetrahedra formed from the exchange of Mg2+ for two protons near the mineral surface after the near-surface Ca has been removed. Nevertheless, Mg release rates from tremolite are ~3 orders of magnitude slower than those from forsterite and enstatite suggesting that tremolite carbonation will be far less efficient than the carbonation of these other Mg-silicate minerals.

The Radioactive Waste Management Directorate of the UK Nuclear Decommissioning Authority has prepared a generic disposal system safety case (DSSC) that covers a range of possible host rock environments. In many of the waste packages considered in the DSSC, the formation of gases by chemical and microbial processes is likely to occur. In order to demonstrate safety, it is necessary to understand the rates at which the gases are generated and their subsequent migration from a disposal facility after closure. This paper is concerned with modelling gas migration through a fractured higher strength host rock. A first set of simulations compares alternative approaches to modelling gas migration through a fractured rock. The approaches differ in their representation of the interaction between the fractures and the rock matrix. As expected, the gross features of many of the simulations are very similar, with a single continuum approach in which the porosity is set equal to either the fracture porosity or the matrix porosity providing the bounding cases. Gas migration is slower for those simulations where the gas can access more of the rock matrix. A final simulation, with a heterogeneous permeability field, is compared with the other simulations, again showing a very similar evolution.

In the UK, most intermediate level radioactive waste is packaged in stainless steel containers. It is important that containers should maintain their integrity for extended periods of storage prior to final disposal. A prototype 4 metre box fabricated from 304S11 stainless steel was monitored at an inland rural building for over twelve years to gain experience in monitoring environmental conditions and corrosion during storage. A wide range of different types of aerosol particles were observed on the surfaces and in the air. They contained corrosive ions such as chloride, as well as other anions such as sulfate and nitrate. The chloride deposition rate was between 0.1 and 4 μg cm−2 yr−1 depending on the orientation and location of the surface, with a chloride/sulfate ratio ranging from ∼0.3–2. The temperature and relative humidity typically ranged from 0–30°C and 40–90%, respectively. The greatest degree of corrosion developed on the base of the box, which had elevated chloride concentrations (10–140 μg cm−2). However, there was little evidence of corrosion propagation on the surface of the box and no evidence of stress corrosion cracking. The average pit propagation rates on a 316L coupon mounted next to the 4 m box were <1 μm yr−1.

Several European waste management organizations have started work on creating a technology platform to accelerate the implementation of deep geological disposal of radioactive waste in Europe. There is an increasing consensus in the international community about geological disposal as the preferred option for solving the long-term management of spent fuel, high-level waste and other longlived radioactive wastes. At the same time, European citizens have a widespread desire for a permanent solution for high-level radioactive waste disposal. A majority of European countries with nuclear power have active waste-management programmes, but the current status and the main challenges of those programmes vary. The most advanced waste management programmes in Europe (i.e. those in Sweden, Finland and France) are prepared to start the licensing process of deep geological disposal facilities within the next decade. Despite the differences between the timing and the challenges of the different programmes, there is a joint awareness that cooperation on the scientific, technical and social challenges related to geological disposal is needed, and that it is beneficial for the timely and safe implementation of the first geological disposal facilities. Such a demonstration of a viable solution for the management of high-level radioactive waste will enhance stakeholder confidence in Europe. It is envisaged that a technology platform would enhance European cooperation in this area. The platform will provide a tool for reducing overlapping work, to produce savings in total costs of research and implementation, and to make better use of existing competence and research infrastructures. From 2008, SKB (Sweden) and Posiva (Finland) led the preparation work to set up the implementing geological disposal of radioactive waste technology platform (IGD-TP). Since then other implementers from France, Germany, Switzerland, United Kingdom, Spain and Belgium have joined the project. To date a strategic research agenda for the platform has been prepared and consulted upon, which is now the basis for taking the platform into a deployment phase.

The safe implementation of geological disposal must be underpinned by sound science. This paper describes the approaches taken by the Nuclear Decommissioning Authority Radioactive Waste Management Directorate, the implementing body for geological disposal in the UK, to build an evidence base of scientific data and understanding which is robust to scrutiny and so provides confidence in the safety of geological disposal.

Geological repository designs employ a multi-barrier approach. The materials, which include wasteforms, backfill and host rock, are typically porous quasi-brittle. Mechanical damage (e.g. nucleation and growth of microcracks) can result in significant changes in permeability. A knowledge of how the permeability is affected is critical to accurate modelling of radionuclide transport. This work proposes a novel 3D lattice-type model for the damage evolution in such materials, referred to as the site-bond model. Its advantages over previous models are that the shape of the lattice cell is physically realistic and that any macroscopic elastic response can be represented, including those of cementitious and geological materials. Damage accumulates as bonds fail upon reaching prescribed failure strengths. These are dictated by a predefined pore size distribution. Concrete is used as a study material. It is demonstrated that the model can predict the macroscopic stress–strain response under unconfined tension and compression with emergent non-linearity due to damage evolution. Ongoing work on the prediction of permeability changes with damage is discussed. This is based on the interaction between the model proposed here and a lattice model of the pore space.

In the UK, technetium may be disposed of in a high pH, low Eh cementitious repository. In such a scenario, its chemistry would be dominated by TcO4 −, in aerobic conditions and the sparingly soluble TcO2(s) in anaerobic conditions. Repository heterogeneity could mean that both Tc(VII) and Tc(IV) are present simultaneously. The anthropogenic ligands EDTA and picolinic acid are commonly used as decontamination agents and are likely to be present in intermediate-level waste (ILW). They could complex with Tc(IV) increasing its aqueous concentration and mobility in the cement porewaters and beyond. The conditional stability constants (measured in 0.3 mol dm−3 NaOH) for the Tc(IV)–EDTA and Tc(IV)–picolinic acid complexes have been determined to be: βTc(IV)−EDTA = 1.6 × 1026, which corresponds to log β = 25.2±0.6; and βTc(IV)−PA = 8.65 × 1026, which corresponds to log β = 26.9±0.1, respectively.

A new data analysis toolkit which is suitable for the analysis of large-scale, long-term datasets and the phenomenon/anomalies they represent is described. The toolkit aims to expose and quantify scientific information in a number of forms contained within a time-series based dataset in a quantitative and rigorous manner, reducing the subjectivity of observations made, thereby supporting the scientific observer. The features contained within the toolkit include the ability to handle non-uniform datasets, time-series component determination, frequency component determination, feature/event detection and characterization/parameterization of local behaviours. An application is presented of a case study dataset arising from the 'Lasgit' experiment.

The degree of transport and retention of 14CH4 in soil is being investigated in a series of laboratory experiments in preparation for field scale trials at the University of Nottingham. The experimental programme focusses on the behaviour and fate of 14CH4 injected into subsoil and its subsequent incorporation into vegetation under field conditions. Due to restrictions on the use of radioactive tracers in the field, 13CH4 is being used as a surrogate gas which can be handled conveniently in the laboratory and field and which can be measured with high precision using gas chromatography with isotope ratio mass spectrometry. The laboratory data indicate significant differences between the diffusion and oxidation rates of 13CH4 in re-packed and undisturbed soil columns, with both rates appearing to be significantly lower in undisturbed soils. Data from both laboratory and field experiments will be used to inform the development of a model of 14CH4 migration and its fate in the biosphere above a geological disposal facility.

The sorption behaviour of I−, Cs+, Ni2+, Eu3+, Th4+ and UO2+ 2on NRVB (Nirex reference vault backfill) a possible vault backfill, at pH 12.8 was studied. Sorption isotherms generated were compared to results obtained in the presence of cellulose degradation products (CDP). Whereas Cs was not affected by the presence of the organic compounds, a notable reduction in the sorption of Th and Eu to cement was observed. The results also indicated limited removal of Ni from solution (with or without an organic ligand) by sorption, the concentration in solution seemingly being determined solely by solubility processes. In the case of uranium, the presence of CDP increased the sorption to cement by almost one order of magnitude. Further studies into the uptake of CDP by cement are being undertaken to identify the mechanism(s) responsible.

Programmes for the geological disposal of radioactive wastes are by nature extremely complex. A structured approach for making and documenting varied kinds of decisions is required to support programme design and implementation. At each programme stage, the decision-making process must be able to identify and justify key priorities for work, to reduce uncertainties.

To support structured decision-making evidence support logic (ESL) has been developed and applied to varied complex projects, nationally and internationally, in several industries. Evidence support logic involves breaking down a hypothesis that informs a decision into a hierarchical 'decision tree'. Examples of hypotheses are 'the geology associated with site x will provide sufficient disposal capacity', 'container x will contain waste form y for z years' and 'the engineered barrier system will provide the required safety functions'. Independent evaluations of confidence 'for' and 'against' bottom-level hypotheses allow the level of remaining uncertainty (or conflict) to be recognized explicitly, and the overall confidence (and uncertainty) relevant to the overall decision, and key sensitivities, to be represented clearly and succinctly.

Thus ESL can help (1) break down decisions into a manageable and logical structure, assisting clear presentation; (2) identify key uncertainties and sensitivities to inform prioritization; and (3) test whether the outcomes of specific studies have improved confidence.

An experimental technique has been developed and applied to the problem of determining effective diffusion coefficients and partition coefficients of Sr in low permeability geological materials. This technique, the micro-reactor simulated channel method (MRSC), allows rapid determination of contaminant transport parameters with resulting values comparable to those determined by more traditional methods and also creates product surfaces that are amenable for direct chemical analysis. An attempt to further constrain mass flux was completed by detailed ion beam analysis of polished tuff surfaces (tuff is a polycrystalline polyminerallic aggregate dominated by silicate phases) that had been reacted with Sr solutions at concentrations of 10−5, 10−3 and 10−1 mol l−1. Ion beam analysis was carried out using beams of both protons (using particle induced X-ray emission and elastic backscattering spectrometry or EBS) and alpha-particles (using Rutherford backscattering spectrometry). The ion beam analyses showed that increased solution concentrations resulted in increased surface concentrations and that in the highest concentration experiment, Sr penetrated to at least 4 μm below the primary interface. The Sr surface concentrations determined by EBS were 0.06 (±0.05), 0.87 (±0.30) and 2.40 (±1.0) atomic weight % in the experiments with starting solution concentrations of 10−5, 10−3, and 10−1 mol l−1, respectively.

The spinel-group minerals, found in a range of igneous rocks, are resistant to weathering and can incorporate several multivalent elements, meaning they have the potential to provide insight into the redox conditions of parental magmas. Naturally occurring spinel can contain varying quantities of Mn, an element which occurs terrestrially and extra-terrestrially as Mn2+, Mn3+, Mn4+ and Mn5+. However, a lack of information on the effects of oxygen fugacity ($f_{{\rm O}_{\rm 2}}$) on: (1) Mn valence state and cation distribution; and (2) on spinel-melt partitioning means that the potential for a Mn-in-spinel oxy-barometer remains largely untested. Here, we use electron probe microanalysis, micro-focus X-ray Absorption Near Edge Structure (XANES) spectroscopy and single-crystal X-ray diffraction (SC-XRD) to investigate cation distribution and valence state in spinels in the Al–Mn–O and Fe–Mn–O systems synthesized at ambient pressure under varying $\hskip 2pt f_{{\rm O}_{\rm 2}}$ conditions. In contrast to previous studies, we find that the spectral resolution of the Mn K-edge XANES spectra is insufficient to provide quantitative data on Mn valence state and site occupancy, although it does verify that Mn is incorporated as both Mn2+ and Mn3+, distributed over tetrahedral and octahedral sites. Combination of data from XANES and SC-XRD refinements can, however, be used to model Mn, Al and Fe valence and site occupancy. It would be expected that Mn–Fe spinels have the potential to record $f_{{\rm O}_{\rm 2}}$ conditions in parental melts due to changes to the octahedral site under conditions that were more reducing. However, decoupling the effects of temperature and oxygen fugacity on the TFe3+–TMn2+ exchange in the Mn–Fe spinels remains challenging. In contrast, little variation is noted in Mn–Al spinels as a function of $\hskip 2pt f_{{\rm O}_{\rm 2}}$, implying that crystal chemistry and cation site geometry may significantly influence cation distribution, and by inference, crystal-melt partitioning, in spinel-group minerals.

Mineralogical, electron microprobe analysis and laser ablation-inductively coupled plasma-mass spectrometry data from molybdenite within two porphyry copper deposits (Kalinovskoe and Birgilda) of the Birgilda-Tomino ore cluster (South Urals) are presented.† The results provide evidence that molybdenites from these two sites have similar trace-element chemistry. Most trace elements (Si, Fe, Co, Cu, Zn, Ag, Sb, Te, Pb, Bi, Au, As and Se) form mineral inclusions within molybdenite. The Re contents in molybdenite vary from 8.7 ppm to 1.13 wt.%. The Re distribution within single molybdenite flakes is always extremely heterogeneous. It is argued that a temperature decrease favours the formation of Re-rich molybdenite. The high Re content of molybdenite observed points to a mantle-derived source.

Polymetallic quartz veins, with up to 1500 ppm indium, have been discovered recently in the Sarvlaxviken area within the 1.64 Ga anorogenic multiphase Wiborg rapakivi batholith and adjacent 1.90 Ga Svecofennian crust in SE Finland. Evidence from primary fluid inclusions in the Sarvlaxviken area provides new information on the hydrothermal transport and depositional processes of metals in anorogenic granites. Fluid inclusions with variable aqueous liquid and vapour proportions (5–90 vol.% vapour) occur in quartz, cassiterite and fluorite belonging to three generations of polymetallic quartz veins. Microthermometry indicates that the veins were deposited at temperatures that range from ~500°C down to <100°C and salinities from 0 to 16 eq. mass% NaCl. Fluid inclusion data show that the depositional conditions were similar regardless of vein generation. The interpreted depositional processes involve phase separation with a combination of condensation, cooling and boiling of an initially low-salinity (<3 eq. mass% NaCl) aqueous magmatic vapour phase enriched in CO2-F-Cl-S and metals. Fluid inclusions with low salinities dominate, but higher salinities are recorded in metal-rich parts of the veins. The turbulent fluid flow, with complex geometry and temperature-salinity patterns, may explain why sulfide and/or oxide opaque minerals occur irregularly, and are locally the dominating vein minerals, but disappear completely into barren parts of the quartz veins. All fluids are considered to have been generated by the F-rich Marviken granite (and related granite dykes), which show all geochemical criteria for an ore-fertile granite. The quartz veins investigated in the adjacent Svecofennian country rocks are considered to represent the very last stage of a fluid with similar characteristics to the fluid responsible for the ore formation in the Sarvlaxviken area, but that had cooled to <100°C.