Article contents
Behaviour of impurity elements during the weathering of ilmenite
Published online by Cambridge University Press: 05 July 2018
Abstract
X-ray spectromicroscopy has been applied to the characterization of weathered ilmenite sand samples from Australian localities. X-ray absorption near edge spectroscopy (Xanes) studies were performed at the K-edges of the major elements Fe and Ti and minor impurity elements Mn and Cr. An extended suite of reference samples with crystallite sizes ranging from 1 nm to μm size were measured to establish if the absorption edge characteristics were influenced by crystal size effects. No changes were detected for oxides of Cr3+, Fe3+ or Ti4+, but the mixed Fe2+/Fe3+ oxide, Fe3O4, showed an edge shift to higher energies (by 1.5 eV) in a nanocrystalline sample. The Xanes study of a composite ilmenite grain with an unweathered primary ilmenite core and a highly weathered rim showed that Fe was present as Fe2+ in the core and Fe3+ in the rim whereas Mn was present as Mn2+ in both core and rim. Chromium, which is incorporated into the grains during weathering, is present predominantly as Cr3+, although minor (~15%) Cr6+ also occurs in highly weathered grains. The absorption K-edges of Fe3+ and Mn2+ are shifted markedly (by 2–3 eV) to higher energies in titanate phases relative to the binary oxides Fe2O3 and MnO.
Keywords
- Type
- Research Article
- Information
- Copyright
- Copyright © The Mineralogical Society of Great Britain and Ireland 2005
References
- 9
- Cited by