During in situ transmission electron microscopy (TEM) field emission experiments, carbon nanotubes are observed to strongly diffract the imaging TEM electron beam. We demonstrate that this effect is identical to that of a standard electrostatic biprism. We also demonstrate that the nanotube biprism can be used to capture electron-holographic information.

Mechanical properties, such as hardness and impact toughness, of ferrite-containing stainless steels are greatly affected by long-term aging at intermediate temperatures. It is known that the α-α′ spinodal decomposition occurring in the iron–chromium-based ferrite is responsible for this aging susceptibility. This decomposition can be characterized unambiguously by atom probe analysis, allowing comparison both with the existing theories of spinodal decomposition and the evolution of some mechanical properties. It is then possible to predict the evolution of hardness of industrial components during service, based on the detailed knowledge of the involved aging process.

Although acidocalcisomes have been well characterized morphologically in other apicomplexan parasites, no such characterization has been done in Plasmodium spp. Here, we report that Plasmodium falciparum merozoites possess electron-dense organelles rich in phosphorus and calcium, as detected by X-ray microanalysis of intact cells, which are similar to the acidocalcisomes of other apicomplexans, but of more irregular form. In agreement with these results malaria parasites possess large amounts of short- and long-chain polyphosphate (polyP), which are associated with acidocalcisomes in other organisms. PolyP levels were highest in the trophozoite stage of the parasite. Treatment of isolated trophozoites with chloroquine resulted in a significant hydrolysis of polyP. Taken together, these results provide evidence that acidocalcisomes from Plasmodium falciparum do not differ significantly from acidocalcisomes of other apicomplexan parasites.

Extended abstract of a paper presented at Microscopy and Microanalysis 2004 in Savannah, Georgia, USA, August 1–5, 2004.

Paracoccidioidomycosis is a systemic granulomatous disease caused by the dimorphic fungus Paracoccidioides brasiliensis. It is the most prevalent systemic mycosis of Latin America and 80% of the reported cases are from Brazil. Because of the great number of neutrophils found in the P. brasiliensis granuloma, studies have been done to evaluate the role of these cells during the development of the infection. Scanning and transmission electron microscopy of thin sections showed that the neutrophils ingest yeast cells through a typical phagocytic process with the formation of pseudopodes. The pseudopodes even disrupt the connection established between the mother and the bud cells. Neutrophils also associate to each other, forming a kind of extracellular vacuole where large yeast cells are encapsulated. Cytochemical studies showed that once P. brasiliensis attaches to the neutrophil surface, it triggers a respiratory burst with release of oxygen-derived products. Attachment also triggers neutrophils' degranulation, with release of endogenous peroxidase localized in cytoplasmic granules. Together, these processes lead to killing of both ingested and extracellular P. brasiliensis.

High-resolution transmission (HRTEM) and high-resolution scanning electron microscopy as well as atomic force microscopy (AFM), X-ray diffraction, and electron diffraction were used for studying the zeolites MFI, MEL, and the MFI/MEL intergrowth system. All three zeolites consisted of individual particles having a size in the range of approximately 0.5 μm to 5 μm. The particle habits varied from rather cubelike to almost spherelike with many intermediate habits. Typically, the particles of these three zeolites were assembled by many individual blocks that differed in the dimension from about 25 nm to 140 nm as well as in the shape from very frequently almost rectangular (for MFI, MEL, and MFI/MEL) to sometimes roundish or irregular habits (mainly for MFI/MEL). An estimate shows that some 104 up to more than 106 densely packed blocks typically may assemble each individual zeolite particle or, related to the corresponding unit cell dimension, about 108 up to 1010 unit cells. The fine surface structure of zeolite particles was terracelike with steps between adjacent terraces typically in the range of 20 nm to 60 nm; the minimum step measured was approximately 4 nm. A detailed study of the surface topography was performed by AFM, detecting organic molecules at the block intersections. The presence of topological defects was observed by HRTEM and electron diffraction.

The key contribution of electron microscopy methods to condensed matter spectroscopy is undoubtedly spatial resolution. So far this has mainly been manifest through electron energy loss spectroscopy in the 1-eV to 10-keV energy range and has not seriously challenged the dominance of optical, X-ray, and neutron spectroscopy methods over most of the vast field at lower energies. At frequencies up to a few megahertz, corresponding to energies of a few nanoelectron volts and below, direct excitation by pulsed electron beams or electric fields has proved effective. Prospects are discussed for extending spatially resolved spectroscopy to the intermediate energy region, mainly by combining the advantages of electrons with those of photons.

Extended abstract of a paper presented at the Pre-Meeting Congress: Materials Research in an Aberration-Free Environment, at Microscopy and Microanalysis 2004 in Savannah, Georgia, USA, July 31 and August 1, 2004.

Opening Reception

Things to see and do in Savannah

Old Fort Jackson

Fort Pulaski National Monument

Telfair Museum of Art 121 Barnard Street, 232-1177

Owens-Thomas Museum 124 Abercorn Street, 233-9743

Wormsloe Plantation 7601 Skidaway Road, 353-3023

Tybee Island

Mighty Eighth Air Force Museum

The 2004 M&M Golf Tournament

The Club at Savannah Harbor

Navigating in Savannah: Crossing over the River

Navigating in Savannah: Resting under the Shade of the Trees

A general method is presented for determining and correcting nonlinear position detector responses in single particle tracking as used in three-dimensional scanning probe microscopy based on optical tweezers. The method uses locally calculated mean square displacements of a Brownian particle to detect spatial changes in the sensitivity of the detector. The method is applied to an optical tweezers setup, where the position fluctuations of a microsphere within the optical trap are measured by an interferometric detection scheme with nanometer precision and microsecond temporal resolution. Detector sensitivity profiles were measured at arbitrary positions in solution with a resolution of approximately 6 nm and 20 nm in the lateral and axial directions, respectively. Local detector sensitivities are used to reconstruct the real positions of the particle from the measured position signals.

A framework is presented for understanding charging processes in low vacuum scanning electron microscopy. We consider the effects of electric fields generated above and below the specimen surface and their effects on various processes taking place in the system. These processes include the formation of an ionic space charge, field-enhanced electron emission, charge trapping and dissipation, and electron–ion recombination. The physical mechanisms behind each of these processes are discussed, as are the microscope operating conditions under which each process is most effective. Readily observable effects on gas gain curves, secondary electron images, and X-ray spectra are discussed.

The influence of W on the temporal evolution of γ′ precipitation toward equilibrium in a model Ni-Al-Cr alloy is investigated by three-dimensional atom-probe (3DAP) microscopy and transmission electron microscopy (TEM). We report on the alloys Ni-10 Al-8.5 Cr (at.%) and Ni-10 Al-8.5 Cr-2 W (at.%), which were aged isothermally in the γ + γ′ two-phase field at 1073 K, for times ranging from 0.25 to 264 h. Spheroidal-shaped γ′ precipitates, 5–15 nm diameter, form during quenching from above the solvus temperature in both alloys at a high number density (∼1023 m−3). As γ′ precipitates grow with aging at 1073 K, a transition from spheriodal- to cuboidal-shaped precipitates is observed in both alloys. The elemental partitioning and spatially resolved concentration profiles across the γ′ precipitates are obtained as a function of aging time from three-dimensional atom-by-atom reconstructions. Proximity histogram concentration profiles (Hellman et al., 2000) of the quaternary alloy demonstrate that W concentration gradients exist in γ′ precipitates in the as-quenched and 0.25-h aging states, which disappear after 1 h of aging. The diffusion coefficient of W in γ′ is estimated to be 6.2 × 10−20 m2 s−1 at 1073 K. The W addition decreases the coarsening rate constant, and leads to stronger partitioning of Al to γ′ and Cr to γ.

The ability to transfect Apicomplexan parasites has revolutionized the study of this important group of pathogens. The function of specific genes can be explored by disruption of the locus or more subtly by introduction of altered or tagged versions. Using the transgenic reporter gene green fluorescent protein (GFP), cell biological processes can now be studied in living parasites and in real time. We review recent advances made using GFP-based experiments in the understanding of protein trafficking, organelle biogenesis, and cell division in Toxoplasma gondii and Plasmodium falciparum. A technical section provides a collection of basic experimental protocols for fluorescent protein expression in T. gondii. The combination of the in vivo marker GFP with an increasingly diverse genetic toolbox for T. gondii opens many exciting experimental opportunities, and emerging applications of GFP in genetic and pharmacological screens are discussed.

Extended abstract of a paper presented at Microscopy and Microanalysis 2004 in Savannah, Georgia, USA, August 1–5, 2004.

Extended abstract of a paper presented at the Pre-Meeting Congress: Materials Research in an Aberration-Free Environment, at Microscopy and Microanalysis 2004 in Savannah, Georgia, USA, July 31 and August 1, 2004.

The variable pressure scanning electron microscope (VP-SEM) allows imaging of insulators without the need for a conductive coating, due to charge neutralization at the surface from recombination of positive ions and surface electrons. Varying certain parameters such as pressure, bias, and working distance creates incomplete neutralization, and localized charging develops called charge contrast. Although the exact mechanism creating charge contrast imaging (CCI) is unknown, it is agreed that it is related to an optimum charge compensation. The behavior of the CCI is still vague, which presents a problem for determining the mechanisms. This article provides user-friendly methods of finding the optimum levels of charge contrast in the VP-SEM. We show that the CCI is obtained at optimum operating conditions where the specimen current is between 2.5 nA and 3.5 nA. The specimen current is a function of secondary electrons (SE) emission and ionization potential, producing an ion flux. Therefore an optimum specimen current represents the balanced conditions of SE emission and ion flux. Controlling the pressure, working distance, bias, scan rate, and beam current allows the microscopist to set the specimen current at this optimum level for charge contrast imaging. All the work was performed on gibbsite using the S3000N VP-SEM from Hitachi.

The Executive Program Group for Microscopy and Microanalysis (M&M) 2004 set out with the challenge of drafting a compelling scientific program for the annual meetings of the Microscopy Society of America (MSA) and the Microbeam Analysis Society (MAS) that would be equal to the excitement of organizational change being discussed by the societies. We feel that we have met the challenge, providing a diverse and balanced program that looks forward to new opportunities and presents the current state-of-the-art for microscopy and microanalysis. For the third consecutive year, the program is strengthened by the co-sponsorship of the International Metallographic Society (IMS), which is fast becoming an annual partner in the M&M meetings.

Extended abstract of a paper presented at Microscopy and Microanalysis 2004 in Savannah, Georgia, USA, August 1–5, 2004.

A review of transmission electron microscopy studies of planar defects in 18R and 2H martensites in Cu-Zn-Al alloys is presented. The non-basal plane faults observed in the 2H structure, the F1 faults, show two kinds of dislocations at their ends. In contrast, two types of non-basal plane faults are observed in the 18R structure, Fo and Fx faults. The non-basal plane faults can be composed of segments of Fo and Fx faults. Six types of imperfect dislocations appear, depending on the type of basal plane fault ending at the non-basal plane fault. The Burgers vectors of all these dislocations have been determined from the contrast analysis of the images and HREM observations.

The first paper on the FFT multislice method was published in 1977, a quarter of a century ago. The formula was extended in 1982 to include a large tilt of an incident beam relative to the specimen surface. Since then, with advances of computing power, the FFT multislice method has been successfully applied to coherent CBED and HAADF-STEM simulations. However, because the multislice formula is built on some physical approximations and approximations in numerical procedure, there seem to be controversial conclusions in the literature on the multislice method. In this report, the physical implication of the multislice method is reviewed based on the formula for the tilted illumination. Then, some results on the coherent CBED and the HAADF-STEM simulations are presented.