In contrast to symmetric division in mitosis, mammalian oocyte maturation is characterized by asymmetric cell division that produces a large egg and a small polar body. The asymmetry results from oocyte polarization, which includes spindle positioning, migration, and cortical reorganization, and this process is critical for fertilization and the retention of maternal components for early embryo development. Although actin dynamics are involved in this process, the molecular mechanism underlying this remained unclear until the use of confocal microscopy and live cell imaging became widespread in recent years. Information obtained through a PubMed database search of all articles published in English between 2000 and 2012 that included the phrases “oocyte, actin, spindle migration,” “oocyte, actin, polar body,” or “oocyte, actin, asymmetric division” was reviewed. The actin nucleation factor actin-related protein 2/3 complex and its nucleation-promoting factors, formins and Spire, and regulators such as small GTPases, partitioning-defective/protein kinase C, Fyn, microRNAs, cis-Golgi apparatus components, myosin/myosin light-chain kinase, spindle stability regulators, and spindle assembly checkpoint regulators, play critical roles in asymmetric cell division in oocytes. This review summarizes recent findings on these actin-related regulators in mammalian oocyte asymmetric division and outlines a complete signaling pathway.

The charging effects of microfibrils of sciatic nerve tissues due to electron irradiation are investigated using electron holography. The phenomenon that the charging effects are enhanced with an increase of electron intensity is visualized through direct observations of the electric potential distribution around the specimen. The electric potential at the surface of the specimen could be quantitatively evaluated by simulation, which takes into account the reference wave modulation due to the long-range electric field.

Extended abstract of a paper presented at Microscopy and Microanalysis 2013 in Indianapolis, Indiana, USA, August 4 – August 8, 2013.

Distribution of wax in laser printer toner was observed using an ultra-high-voltage (UHV) and a medium-voltage transmission electron microscope (TEM). As the radius of the wax spans a hundred to greater than a thousand nanometers, its three-dimensional recognition via TEM requires large depth of focus (DOF) for a volumetric specimen. A tomogram with a series of the captured images would allow the determination of their spatial distribution. In this study, bright-field (BF) images acquired with UHV-TEM at a high tilt angle prevented the construction of the tomogram. Conversely, the Z-contrast images acquired by the medium-voltage TEM produced a successful tomogram. The spatial resolution for both is discussed, illustrating that the image degradation was primarily caused by beam divergence of the Z-contrast image and the combination of DOF and chromatic aberration of the BF image from the UHV-TEM.

Imaging soft matter by transmission electron microscopy (TEM) is anything but straightforward. Recently, interest has grown in developing alternative imaging modes that generate contrast without additional staining. Here, we present a dark-field TEM technique based on the use of an annular objective aperture. Our experiments demonstrate an increase in both contrast and signal-to-noise ratio in comparison to conventional bright-field TEM. The proposed technique is easy to implement and offers an alternative imaging mode to investigate soft matter.

Several authors have reported the workability, mechanical properties, and durability of concrete produced with construction waste replacing the natural aggregate. However, a systematic microstructural characterization of recycled aggregate concrete has not been reported. This work studies the use of fine recycled aggregate to replace fine natural aggregate in the production of concrete and reports the resulting microstructures. The used raw materials were natural aggregate, recycled aggregate obtained from a standard concrete, and Portland cement. The substitution extent was 0, 10, 50, and 100 vol%; hydration was stopped at 9, 24, and 96 h and 28 days. Microscopy was focused on the cement/aggregate interfacial transition zone, enlightening the effect of incorporating recycled aggregate on the formation and morphology of the different concrete hydration products. The results show that concretes with recycled aggregates exhibit typical microstructural features of the transition zone in normal strength concrete. Although overall porosity increases with increasing replacement, the interfacial bond is apparently stronger when recycled aggregates are used. An addition of 10 vol% results in a decrease in porosity at the interface with a corresponding increase of the material hardness. This provides an opportunity for development of increased strength Portland cement concretes using controlled amounts of concrete waste.

The aim of this study was to analyze whether the mesenchymal stromal cells (MSCs) isolated from palatal tissue grafts harvested in order to cover gingival recessions have the basic characteristics of stem cells. The palatal tissue cells were processed using a special culture medium that stimulated the development of only undifferentiated cellular lines. Cells at passage 4 were evaluated by flow cytometry to examine the expression of specific surface markers and were tested for multilineage differentiation capacity. These cells collected at passage 4 were also investigated for the capacity to cluster into embryoid body aggregates. Palatal MSCs displayed positive staining for the mesenchymal markers CD29, CD73, CD105, CD 49e, and CD44, but did not express hematopoietic markers CD34/45. The palatal MSCs successfully differentiated into osteogenic, adipogenic, and chondrogenic lineages. When seeded in special conditions, palatal MSCs propagated into unattached spheres resembling embryoid body aggregates consisting both of differentiated and undifferentiated cells as revealed at the ultrastructural evaluation. It is concluded that the isolated palatal MSCs fulfilled the basic criteria defining the stem cells. This new source of stem cells characterized here for the first time opens new perspectives on possible applications in basic research and in regenerative medicine.

Extended abstract of a paper presented at Microscopy and Microanalysis 2013 in Indianapolis, Indiana, USA, August 4 – August 8, 2013.

Nanoparticles in general (NPs) and/or nanomaterials offer remarkable opportunities in industrial production, daily consumables, medicine, biotechnology, electronics and numerous other important commercial and economical areas. Among all these areas, nanomedicine has opened novel treatments for problematic diseases such as viral, genetic, cancer, AIDS, etc. There is limited information available regarding translocation and distribution of NPs in the body and in the environment. Additionally, there is also need for more information on NPs toxicity. Recently has been demonstrated that physiological barriers such as pulmonary and gastro-intestinal tract are affected.

The main objective of this work is to use functionalized metal NPs, as emissive agent markers, assess their internalization in cells and evaluate toxicity to cells.

Using the emissive two probes synthesized in a one-pot reaction using fluoresceine as chromophore, several gold (Au), round shape, and silver (Ag) NPs (round and triangular shapes) were functionalized in organic media and water by Brust and Turkevish methodology, using tetraoctylammonium bromide (TOABr) as a common stabilizer and sodium borohydride as reducing agent. All has been characterized by UV-vis and emission spectroscopy, transmission electron microscopy (TEM) (Figure 1), and Light scattering. To study the route of internalization into the cell NP-complexes were injected intraperitoneally in fish (Carassius auratus). After 48 hour fish were sampled and sacrificed and liver and intestine processed for histology examination. Additional sub-samples were stored at – 80ºC for enzymatic analysis (glutathione-S-transferase and catalase). Blood was also collected from healthy non-injected fish, for leucocyte separation followed by incubation with the metal NPs and cell viability assays. The presence of emissive NPs in cells was examined by microscopy using a Leica microscope (ATC 2000) adapted for epifluorescence (EF).

The microscopy analysis showed that apparently both metal NPs were internalized by leucocytes and intestine cells (Figure 2a and 2b) but apparently not by hepatocytes. However, it is still to clarify if NPs internalization occurred in dead or dying cells only, with more permeable membranes, or also in living cells. Another possibility relates to the detection limits and resolution of the microscope used: the fraction of NPs entering is too low and not detectable with this type of equipment. No significant fluorescence was detected in controls. Viability assays showed higher mortality rates in leucocytes incubated with triangular Ag NPs suggesting that the type of metal and shape have influence in cell toxicity. In general, enzymatic assays indicate low oxidative stress for cells. However, GST results show significant (p > 0.05) differences in livers from fish injected with round Ag NPs. With respect to catalase, significant differences (p > 0.05) were detected in livers from fish injected with round Au NPs. Although the presented results are preliminary they suggest that functionalized NPs are able to penetrate cell membranes. On the other hand, the observed toxicity can be attributed to differences in shape and type of metal NPs.

The authors acknowledge the funding by Fundação para a Ciência e Tecnologia through grant PTDC/MAR/119068/2010 and through project no. PEst-C/EQB/LA0006/2011 granted to Requimte.

During laser deposition of Ni-Cr-B-Si-C alloys with high amounts of Cr and B, various microstructures and phases can be generated from the same chemical composition that results in heterogeneous properties in the clad layer. In this study, the microstructure and phase constitution of a high-alloy Ni-Cr-B-Si-C coating deposited by laser cladding were analyzed by a combination of several microscopy characterization techniques including scanning electron microscopy in secondary and backscatter imaging modes, energy dispersive spectroscopy (EDS), electron backscatter diffraction (EBSD), and transmission electron microscopy (TEM). The combination of EDS and EBSD allowed unequivocal identification of micron-sized precipitates as polycrystalline orthorhombic CrB, single crystal tetragonal Cr5B3, and single crystal hexagonal Cr7C3. In addition, TEM characterization showed various equilibrium and metastable Ni-B, Ni-Si, and Ni-Si-B eutectic products in the alloy matrix. The findings of this study can be used to explain the phase formation reactions and to tune the microstructure of Ni-Cr-B-Si-C coatings to obtain the desired properties.

The hindguts of lower termites harbor highly diverse, endemic communities of symbiotic protists, bacteria, and archaea essential to the termite's ability to digest wood. Despite over a century of experimental studies, ecological roles of many of these microbes are unknown, partly because almost none can be cultivated. Many of the protists associate with bacterial symbionts, but hypotheses for their respective roles in nutrient exchange are based on genomes of only two such bacteria. To show how the ecological roles of protists and nutrient transfer with symbiotic bacteria can be elucidated by direct imaging, we combined stable isotope labeling (13C-cellulose) of live termites with analysis of fixed hindgut microbes using correlated scanning electron microscopy, focused ion beam-scanning electron microscopy (FIB-SEM), transmission electron microscopy, and high resolution imaging mass spectrometry (NanoSIMS). We developed methods to prepare whole labeled cells on solid substrates, whole labeled cells milled with a FIB-SEM instrument to reveal cell interiors, and ultramicrotome sections of labeled cells for NanoSIMS imaging of 13C enrichment in protists and associated bacteria. Our results show these methods have the potential to provide direct evidence for nutrient flow and suggest the oxymonad protist Oxymonas dimorpha phagocytoses and enzymatically degrades ingested wood fragments, and may transfer carbon derived from this to its surface bacterial symbionts.

Studies of the capillary bed characterized by its length or length density are relevant in many biomedical studies. A reliable assessment of capillary length from two-dimensional (2D), thin histological sections is a rather difficult task as it requires physical cutting of such sections in randomized directions. This is often technically demanding, inefficient, or outright impossible. However, if 3D image data of the microscopic structure under investigation are available, methods of length estimation that do not require randomized physical cutting of sections may be applied. Two different rat brain regions were optically sliced by confocal microscopy and resulting 3D images processed by three types of capillary length estimation methods: (1) stereological methods based on a computer generation of isotropic uniform random virtual test probes in 3D, either in the form of spatial grids of virtual “slicer” planes or spherical probes; (2) automatic method employing a digital version of the Crofton relations using the Euler characteristic of planar sections of the binary image; and (3) interactive “tracer” method for length measurement based on a manual delineation in 3D of the axes of capillary segments. The presented methods were compared in terms of their practical applicability, efficiency, and precision.

Defining the ultrastructure of endocytic sites and localization of endocytic proteins in Saccharomyces cerevisiae by immunoelectron microscopy is central in understanding the mechanisms of membrane deformation and scission during endocytosis. We show that an improved sample preparation protocol based on high-pressure freezing, freeze substitution, and low-temperature embedding allows us to maintain the cellular fine structure and to immunolabel green fluorescent protein–tagged endocytic proteins or actin in the same sections. Using this technique we analyzed the stepwise deformation of endocytic membranes and immunolocalized the endocytic proteins Abp1p, Sla1p, Rvs167p, and actin, and were able to draw a clear ultrastructural distinction between endocytic sites and eisosomes by immunolocalizing Pil1p. In addition to defining the geometry and the fine structure of budding yeast endocytic sites, we observed associated actin filaments forming a cage-like meshwork around the endocytic membrane.

Organic matter (OM) entrapped in calcite is regularly used for environmental studies; however, insertion mechanisms and types of interaction remain poorly understood. The present study used a new methodology to investigate interactions between OM and the calcite matrix during crystallization processes with humic acid (HA) entrapment. A multimethod approach confirmed that HA is both adsorbed onto the calcite surface and incorporated into the calcite lattice during crystallization. Our results also confirm the log-linear correlation between fluorescence intensity and calcite matrix HA concentration. Fourier transform infrared spectroscopy showed that HA in colloidal conformation is adsorbed onto the calcite surface as a result of the structure of the OH stretching band. We also developed a new method based on synchrotron analysis that uses sulfur as a tracer element for entrapped HA and that localizes the OM electrostatically adsorbed onto the calcite surface. Changes in the sulfur environment, determined using X-ray absorption near-edge structure spectroscopy, indicated more complex insertion mechanisms than simple adsorption of HA during calcite crystallization. Desorption experiments revealed the stability of the OM atomic structure and its layered nature. These results allowed us to draw up a general model of OM insertion in calcite.

The objective of this study is to determine the optimal physical parameters of a rotating gantry micro-CT system to assess in vivo changes to the trabecular bone of mice. Magnification, binning, peak kilovoltage, beam filtration, and tissue thickness are examined on a commercially available micro-CT system. The X-ray source and detector geometry provides 1.3×, 1.8×, or 3.3× magnification. Binning is examined from no binning to 2 to 4. Energy is varied from 40 to 80 kVp in 10 kVp increments and filter thickness is increased from no filtration to 1.5 mmAl in 0.5 mmAl increments. Mice are imaged at different magnifications and binning combinations to evaluate changes to image quality and microstructure estimation. Increasing magnification from 1.3× to 3.3× and lowering binning from 4 to 1 varies the spatial resolution from 2.5 to 11.8 lp/mm. Increasing the beam energy or filtration thickness decreases Hounsfield unit (HU) estimation, with a maximum rate of change being −286 HU/kVp for 80 kVp. Images for murine trabecular bone are blurred at effective pixel sizes above 60 μm. By comparing resolution, signal-to-noise ratio, and radiation dose, we find that a 3.3× magnification, binning of 2.80 kVp beam with a 0.5 mmAl filter comprises the optimal parameters to evaluate murine trabecular bone for this rotating gantry micro-CT.

Extended abstract of a paper presented at Microscopy and Microanalysis 2013 in Indianapolis, Indiana, USA, August 4 – August 8, 2013.