Hostname: page-component-586b7cd67f-t7czq Total loading time: 0 Render date: 2024-11-26T12:11:52.880Z Has data issue: false hasContentIssue false
  • English
  • Français

Détermination de la ténacité de matériauxfragiles ou ductiles à partir de l’essaid’indentation

Published online by Cambridge University Press:  22 May 2013

A. Iost
A. Iost*
Affiliation:
Arts et Métiers ParisTech; Laboratoire Mécanique, Surfaces, Matériaux & Procédés (MSMP), 8 boulevard Louis XIV, 59046 Lille Cedex, France. e-mail : [email protected]
Get access

Abstract

les différentes méthodes qui utilisent l’essai d’indentation pour estimer la ténacité sont revues et commentées. Pour les matériaux fragiles, les formules sont principalement basées sur la mesure des fissures formées par l’indenteur ou, si l’essai est instrumenté, sur les décrochements (pop-in) observés sur la courbe charge-déplacement. D’autres méthodes moins connues peuvent utiliser la mesure de l’ouverture en fond de fissure, une équivalence entre la longueur de fissure formée et l’accroissement de pénétration de l’indenteur ou le clivage provoqué par une indentation proche du bord du matériau étudié. Pour les matériaux ductiles aucune fissure n’est visible à la surface, même pour les fortes charges appliquées. Dans ce cas la ténacité est reliée par la mécanique continue du dommage à un dommage critique mis en évidence par la diminution du module d’élasticité avec l’augmentation de la profondeur d’indentation. Toutes ces méthodes permettent de calculer la ténacité avec une incertitude pouvant aller au maximum à 50 %.

Keywords

Indentationténacitérupture fragilerupture ductilemécanique continue du dommagepropriétés mécaniquesIndentationfracture toughnessbrittle fractureductile fracturecontinuum damage mechanicsmechanical properties
Type
Research Article
Information
Metallurgical Research & Technology , Volume 110 , Issue 3 , 2013 , pp. 215 - 233
Copyright
© EDP Sciences 2013

Access options

Get access to the full version of this content by using one of the access options below. (Log in options will check for institutional or personal access. Content may require purchase if you do not have access.)

References

Références

Page, T.F., Oliver, W.C., McHargue, C., J. Mater. Res. 7 (1992) 450-473
Lankford, J., Predebon, W.W., Staehler, J.M., Subhash, G., Pletka, B.J., Anderson, C.E., Mech. Mater. 29 (1998) 205-218
Rouxel, T., Ji, H., Guin, J.P., Augereau, F., Rufflé, B., J. Appl. Phys. 107 (2010) 094903-094903-5
Shang, H., Rouxel, T., Buckley, M., Bernard, C., J. Mater. Res. 21 (2006) 632-638
Yoshida, S., Sangleboeuf, J.C., Rouxel, T., Int. J. Mater. Res. 98 (2007) 360-364
Argon, A.S., Demkowicz, M.J., Met. Mater. Trans A 39A (2008) 1762-1778
Argon, A.S., Acta Met. 27 (1979) 47-58
Schuh, C.A., Argon, A.S., Nieh, T.G., Wadsworth, J., Phil. Mag. 83 (2003) 2585-2597
Huang, Y., Shen, J., Sun, Y., Sun, J., Mater. Des. 31 (2010) 1563-1566
Armstrong, R.W., Elban, W.L., Walley, S.M., Int. J. Modern Phys. B 27 (2013) 1330004-1-1330004-79
Walley, S.W., Mater. Sci. Technol. 28 (2012) 1028-1044
VanLandingham, M.R., J. Res. Natl. Ins. Stand. Technol. 108 (2003) 249-265
Griffith, A.A., Phil. Trans. Royal Soc. A 221 (1920) 163-198
François, D., Essai de mesure de la ténacité-Mécanique de la rupture, Dossier Techniques de l’Ingénieur, M 4 166 (2007) Google Scholar
Irwin, G.R., Trans. ASME J. Appl. Mech. 24 (1948) 361-364
Palmqvist, S., Annaler 141 5 (1957) 300-307; BISI translation 1865 (1961)
Palmqvist, S., Stahl Eisen 7 (1951) 1081-1090
Chermant, J.L., Deschanvres, A., Iost, A., Meyer, R., Mater. Res. Bull. 8 (1973) 925-934
R. Lueth, Determination of fracture toughness parameters for tungsten carbide-cobalt, Fracture toughness of ceramics, R.C. Bradt, D.P.H. Hasselman et F.F. Lange Edts., Plenum Press, New York, 1974, Vol. 2, pp. 791-806
N. Ingesstrom, H. Nordberg, The fracture toughness of cemented tungsten carbides, rapport IM-948, Swedish Inst. Met. Res., 1973
Exner, H.E., Trans. AIME 245 (1969) 677-683
Viswanadham, R.K., Venables, J.D., Met. Trans. A 8 (1977) 187191
Peters, C.T., J. Mater. Sci. 14 (1979) 1619-1623
R. Warren, H.J. Matzke, Proc. first Int. Conf. on science of hard materials, edited by R.K. Viswanadham, D.J. Rowcliffe and J. Gurland Eds., Plenum Press, New York, 1983, pp. 563-582
Niihara, K., J. Mater. Sci. Lett. 2 (1983) 221-223
Shetty, D.K., Wright, I.G., Mincer, P.N., Clauer, A.H., J. Mater. Sci. 20 (1985) 1873-1882
Spiegler, R., Shmauder, S., Sigl, L.S., J. Hard. Met. 1 (1990) 147-158
Lawn, B.R., Fuller, E.R., J. Mater. Sci. 10 (1975) 2016-2024
Lawn, B.R., Fuller, E.R., Wiederhorn, S.M., J. Am. Ceram. Soc. 58 (1976) 193-197
B.R. Lawn, D.B. Marshall, Indentation fracture and strength degradation in ceramics, R.C. Bradt, D.P.H. Hasselman et F.F. Lange Edts., Plenum Press, New York, 1978, Vol.3, pp. 205-229
Marshall, D.B., Lawn, B.R., J. Mater. Sci. 14 (1979) 2001-2012
K. Niihara, R. Morena, D.P.H. Hasselman, in Fracture Mechanics of Ceramics, edited by R.C. Bradt, A.G. Evans, P.P. Hasselman et F.F. Lange, Plenum Press, New York, 1983, Vol. 5, pp. 97-105
Ponton, C.B., Rawlings, R.D., Br. Ceram. Trans. J. 88 (1989) 83-90
Ponton, C.B., Rawlings, R.D., Mater. Sci. Technol. 5 (1989) 865-872
Ponton, C.B., Rawlings, R.D., Mater. Sci. Technol. 5 (1989) 961-976
Antis, G.R., Chantikul, P., Lawn, B.R., Marshall, D.B., J. Am. Ceram. Soc. 64 (1981) 533-538
Cuadrado, N., Casellas, D., Anglada, M., Jiménez-Piqué, E., Scr. Mater. 66 (2012) 670-673
D.S. Harding, W.C. Oliver, G.M. Pharr, Cracking during nanoindentation and its use in the measurement of fracture toughness, in Thin Films: Stresses and Mechanical Properties V, Materials Research Society Symposium edited by S.P. Baker, C.A. Ross, P.H. Townsend, C.A. Volkert, P.B. Børgesen, Proceedings, 2nd edn., Materials Research Society, Pittsburgh, Pennsylvania, 1995, Vol. 356, pp. 663
Pharr, G.M., Mater. Sci. Eng. A 253 (1998) 151–159
Kruzic, J.J., Kim, D.K., Koester, K.J., Ritchie, R.O., J. Mech. Behav. Biomed. Mater. 2 (2009) 384-395
Scholz, T., Schneider, G.A., Muñoz, J., Swain, M.V., Appl. Phys. Lett. 84 (2004) 3055-3057
Gong, J., J. Eur. Ceram. Soc. 19 (1999) 1585-1592
Cheng, Y-T., Cheng, C-M., Appl. Phys. Lett. 73 (1998) 614-616
Zhang, T., Feng, Y., Yang, R., Jiang, P., Scripta Mater. 62 (2010) 199-201
Laugier, M.T., J. Mater. Sci. Lett. 6 (1987) 355-356
Marshall, D.B., Lawn, B.R., J. Am. Ceram. Soc. 60 (1977) 86-87
Chantikul, P., Antis, G.R., Lawn, B.R., Marshall, D.B., J. Am. Ceram. Soc. 64 (1981) 539-543
Malzbender, J., Surf. Coat. Technol. 201 (2006) 3797–3801
T. Fett, Computation of the crack opening displacements for Vickers indentation cracks, Forschungsszentrum Karlsruhe, Allemagne, rapport FZKA 6557, pp.1-28
Fett, T., Kounga, T., Rodel, A.B., J. Mater. Sci. 39 (2004) 2219-2221
Schneider, G.A., Fett, T., J. Ceram. Soc. Japan 114 (2006) 1044-1048
Frank, F.C., Lawn, B.R., Proc. Roy. Soc. A 299 (1967) 291-306
Lawn, B.R., A.G. J. Mater. Sci. 12 (1977) 2195-2199
Lankford, J., Davidson, D.L., J. Mater. Sci. 14 (1979) 1662-1668
Lawn, B.R., Marshall, D.B., J. Am. Ceram. Soc. 62 (1979) 347-350
Mikowski, A., Serbena, F.C., Foerster, C.E., Jurelo, A.R., Lepienski, C.M., J. Appl. Phys. 110 (2011) 103504-103504-5
Morris, D.J., Myers, S.B., Cook, R.F., J. Mater. Res. 19 (2004) 165-175
Field, J.S., Swain, M.V., Dukino, R.D., J. Mater. Res. 18 (2003) 1411-1419
Cotterell, B., Kamminga, J., Dickson, F.P., Int. J. Fract. 29 (1985) 205-221
McCormick, N.J., Almond, E.A., J. Hard. Mater. 1 (1990) 25-51
Morrell, R., Gant, A.J., Int. J. Refract. Met. Hard Mater. 19 (2001) 293-301
Gogotsi, G.A., Inorg. Mater. 42 (2006) 567-572
Gogotsi, G.A., Mudrick, S.P., J. Non-Cryst. Solids 356 (2010) 1021-1026
Chai, H., Lawn, B.R., Acta Mater. 55 (2007) 2555-2561
Felder, E., Roy, S., Darque-Ceretti, E., C. R. Meca 339 (2011) 443-457
Oliver, D.J., Bradby, J.E., Williams, J.S., Swain, M.V., Munroe, P., J. Appl. Phys. 101 (2007) 043524-043524-9
Li, X., Diao, D., Bhushan, B., Acta Mater. 45 (1997) 4453-4461
Li, X., Bhushan, B., Thin Solid Films 315 (1998) 214-221
den Toonder, J., Malzbender, J., de With, G., Balkenende, R., J. Mater. Res. 17 (2002) 224-233
Michel, M.D., Muhlen, L.V., Achete, C.A., Lepienski, C.M., Thin Solid Films 496 (2006) 481-488
Warren, O.L., Wyrobek, T.J., Meas. Sci. Technol. 16 (2005) 100-110
Chen, J., Bull, S.J., Thin Solid Films 517 (2009) 2945-2952
Chen, J., Surf. Coat. Technol. 206 (2012) 3064-3068
Chen, J., Bull, S.J., Thin Solids Films 494 (2006) 1-7
Malzbender, J., de With, G., Surf. Coat. Technol. 135 (2000) 60-68
Malzbender, J., den Toonder, J.M.J., Balkenende, A.R., de With, G., Mat. Sci. Eng. R 36 (2002) 47-103
Nakonechna, O., Cselle, T., Morstein, M., Karimi, A., Thin Solid Films 447-448 (2004) 406-412
Chen, J., Bull, S.J., J. Phys. D 40 (2007) 5401-5417
Zhang, X., Zhang, S., Thin Solid Films 520 (2012) 3423-3428
Zhang, S., Zhang, X., Thin Solid Films 520 (2012) 2375-2389
Bull, S., C. R. Meca. 339 (2011) 518-531
Chen, J., J. Phys. D 45 (2012) 203001-203001-14
Kim, J-Y., Lee, K-W., Lee, J-S., Kwon, D., Surf. Coat. Technol. 201 (2006) 4278-4283
Lee, K-W., Kim, K-H., Kim, J-Y., Kim, K-H., Choi, B.-H., Kwon, D., J. Loss Prev. Process. Ind. 22 (2009) 868-872
Das, G., Ghosh, S., Ghosh, S., Ghosh, R.N., Mater. Sci. Eng. A 408 (2005) 158-164
Habbab, H., Mellor, B.G., Syngellakis, S., Acta Mater. 54 (2006) 1965-1973
Chaudhri, M., Winter, M., J. Phys. D 21 (1998) 370-374
Iost, A., Bigot, R., J. Mater. Sci. 31 (1996) 3573-3577
F.M. Haggag, Field indentation microprobe for structural integrity evaluation, US Patent N° 4 852 397, 1, 1989
F.M. Haggag, R.K. Nanstad, D.N. Braski, Structural integrity evaluation based on an innovative field indentation microprobe, in Innovative approaches to irradiation damage, and fracture analysis, edited by D.L. Marriot, T.R. Wagner and W.H. Bamford, New York, Am. Soc. Mech. Engrs. ASME PVP, 1989, Vol. 170, pp. 101-107
D. Tabor, The hardness of metals, Oxford University Press, London, 1951
J-Ahn, H., Kwon, D., J. Mater. Res. 16 (2001) 3170-3178
Lee, K-W., Kim, K-H., Kim, J-Y., Kwon, D., J. Phys. D 41 (2008) 074014-074014-6
Alcalà, J., Barone, A.C., Anglada, M., Acta Mater. 48 (2000) 3451-3464, voir aussi corrigendum, Acta Mater. 49 (2001) 749
Kang, S-K., Kim, J-Y., Kang, I., Kwon, D., J. Mater. Res. 24 (2009) 2965-2973
Menčik, J., Swain, M.V., J. Mater. Res. 10 (1995) 1491-1501
Haggag, F., Byun, T.-S., Hong, J.H., Miraglia, P.Q., Murty, K.L., Scripta Mater. 38 (1998) 645-651
Byun, T.S., Kim, J.W., Hong, J.H., J. Nucl. Mater. 252 (1998) 187-194
Murty, K.L., Mathew, M.D., Wang, Y., Shah, V.N., Haggag, F.M., Int. J. Pressure Vessels Piping 75 (1998) 831-840
Lee, J.-S., Jang, J.-I., Lee, B.-W., Choi, Y., Lee, S.G., Kwon, D., Acta Mater. 54 (2006) 1101-1119
J.-S. Lee, K.-H. Kim, D.S. Kim, D. Kwon, Evaluation of fracture toughness using indentation method based on continuum damage mechanics, Proc. 6th Int. Offshore and polar Eng. Conf., San Francisco, California, USA, 2006, pp. 81-87
Murzewski, J., Une théorie statistique du corps fragile quasi-homogène, Proc. IUTAM 9th Congrès, Bruxelles, Belgique 5 (1957) 313-320 Google Scholar
Kachanov, L.M., Otdeleniya Teknicheskihl I Nauk 8 (1958) 26-31 (en langue russe)
J-Chaboche, L., Nucl. Eng. Des. 64 (1981) 233-247
Lemaitre, J., Nucl. Eng. Des. 80 (1984) 233-245
Ambroziak, A., Kłosowski, P., Task Quarterly 10 (2007) 437-454
Lemaitre, J., Eng. Fract. Mech. 25 (1986) 523-537
Lemaitre, J., Dufailly, J., Eng. Fract. Mech. 28 (1987) 643-651
Yang, M., Akiyama, Y., Sasaki, T., J. Mater. Process. Technol. 151 (2004) 232-236
Cai, J., Li, F., Liu, T., Chen, B., Mater. Charact. 62 (2011) 287-293
Fougere, G.E., Riester, L., Ferber, M., Weertman, J.R., Siegel, R.W., Mater. Sci. Eng. A 204 (1995) 1-6
Mukhopadhyay, N.K., Paufler, P., Int. Mater. Rev. 51 (2006) 209-245
Tasan, C.C., Hoefnagels, J.P.M., Geers, M.G.D., Scripta Mater. 63 (2010) 316-321
Tasan, C.C., Hoefnagels, J.P.M., Geers, M.G.D., Acta Mater. 60 (2012) 3581-3589
Oliver, W.C., Pharr, G.M., J. Mater. Res. 19 (2004) 3-20
A.L. Gurson, J. Eng. Mater. Technol. Trans. ASME (1977) 2-15
Tvergaard, V., Hutchison, J.W., Int. J. Solids Struct. 39 (2002) 3581-3597
Hao, S., Brocks, W., Comp. Mech. 20 (1997) 34-40
Anderson, H., J. Mech. Phys. Solids 25 (1977) 217-233
Ghosh, S., Das, G., Eng. Fract. Mech. 79 (2012) 126-137
Das, G., Das, M., Sinha, S., Gupta, K.K., Chakrabarty, S., Ray, A.K., Mater. Sci. Eng. A 513 (2009) 389-393
Bonora, N., Eng. Fract. Mech. 58 (1997) 11-28
Bonora, N., Gentile, D., Pirondi, A., Newaz, G., Int. J. Plasticity 21 (2005) 981-1007
He, M., Li, F., Ali, N., Mater. Sci. Eng. A 528 (2011) 823-837
He, M., Li, F., Cai, J., Chen, B., Theor. Appl. Fract. Mech. 56 (2011) 104-111
Li, J., Li, F., He, M., Xue, F., Zhang, M., Wang, C., Mater. Des. 40 (2012) 176-184
Li, H., Cai, X., Cheng, Q., Scripta Mater. 45 (2001) 1381-1386
Li, J., Li, F., Xue, F., Cai, J., Chen, B., Mater. Des. 37 (2012) 491-499
Tang, C.Y., Tai, W.H., J. Mater. Proc. Tech. 99 (2000) 135-140
J.B. Pethica, Microhardness test with penetration depths less than ion implanted layer thickness, in 3rd Int. Conf. on modification of surfaces properties of metals by ion-implantation,edited by V. Ashworth, W.A. Grunt and R.P.M. Procter, Manchester, England, 1981, Pergamon Press, Oxford, 1982, pp. 147-156
D. Newey, H.M. Pollock, M.A. Wilkins, The ultra-microhardness of ion-implanted iron and steel at sub-micron depths and its correlation with wear resistance, in 3rd Int. Conf. on modification of surfaces properties of metals by ion-implantation, V. Ashworth, W.A. Grunt, R.P.M. Procter, Manchester, England, 1981, Pergamon Press, Oxford, 1982, pp. 157-166
Quinn, G.D., Bradt, R.C., J. Am. Ceram. Soc. 90 (2007) 673-680
Lee, J.H., Gao, Y.F., Johanns, K.E., Pharr, G.M., Acta Mater. 60 (2012) 5448-5467
Lawn, B.R., Cook, R.F., J. Mater. Sci. 47 (2012) 1-22