Hostname: page-component-586b7cd67f-t8hqh Total loading time: 0 Render date: 2024-11-27T18:35:07.782Z Has data issue: false hasContentIssue false
  • English
  • Français

Tribological properties of Brass-graphitecomposite

Published online by Cambridge University Press:  02 May 2014

Zohair Sarajan
Zohair Sarajan*
Affiliation:
Department of Materials Science and Engineering, Yazd Branch, Islamic Azad University, Yazd, Iran Safaeeyeh, P.O.Box:89195/155. e-mail: [email protected], [email protected]
Get access

Abstract

Brass-graphite composites were fabricated by adding graphite/Cu/Zn compact powderusingthe stir-casting technique and their tribological behavior against a brass disk wasstudied under simulated actual conditions, in comparison with the common graphite/brasscomposite The tribological properties of the brass-graphite composite were compared withdifferent percentages of graphite in the structure using the pin-on-disk method. Theexperimental results showed that the 7−9 wt.% graphite creates a better wear resistance in high-pressureapplications. Continuous Zn layers successfully covered the surface of the graphiteparticles, which could contribute to the improvement of interfacial wettability betweengraphite and brass. In this study, brass-graphite composites containing 8.4 ~ 15 wt.% of Ni-coated graphitewere fabricated. The friction coefficient of composites decreased with increasing graphitecontent. The wear resistance was improved by the addition of Ni-coated graphite butdegraded at high graphite content. The results indicated this composite showed much bettermechanical properties and tribological properties in comparison with brass. The compositewith 11.7 wt.% nickel-coated graphite showed the best tribological properties.

Keywords

Brass/graphitecompositetribologicalself-lubricating
Type
Research Article
Information
Metallurgical Research & Technology , Volume 111 , Issue 2 , 2014 , pp. 85 - 93
Copyright
© EDP Sciences 2014

Access options

Get access to the full version of this content by using one of the access options below. (Log in options will check for institutional or personal access. Content may require purchase if you do not have access.)

References

Lee, S., Matsunaga, K., Ikuhara, Y., Lee, S., Mater. Sci. Eng. A 449–451 (2007) 778-781
Jinglian, F., Yubo, C., Tao, L., Jiamin, T., Rare Metal Mater. Eng. 38 (2009) 1693-1697
Datta, S., Tewari, S., Gatica, J., Shih, W., Bentsen, L., Metall. Mater. Trans. A 30 (1999) 175-181
Chu, J., Chung, C., Lee, P., Rigsbee, J., Wang, J., Metall. Mater. Trans. A 29 (1998) 647-658
Yang, L., Shen, P., Lin, Q., Qiu, F., Jiang, Q., Appl. Surf. Sci. 257 (2011) 6276-6281
Brodova, I., Chikova, O., Vityunin, M., Yablonskikh, T., Shirinkina, I., Astaf’ev, V., Phys. Metals Metallgraph. 6 (2009) 626-632
Cik, J., Emmer, S., Bielek, J., Si, L., Wear 265 (2008) 417–421
Lee, S., Matsunaga, K., Ikuhara, Y., Lee, S., Mater. Sci. Eng. A 449-451 (2007) 778-781
Jinglian, F., Yubo, C., Tao, L., Jiamin, T., Rare Metal Mater. Eng. 10 (2009) 1693-1697
Pearson, B.R., Brook, P.A., Waterhouse, R.B., Wear 106 (1985) 225-260
Kim, J.K., Kestursatya, M., Rohatgi, P.K., Metall. Mater. Trans. A 4 (2000) 1283-1293
Kato, H., Takama, M., Iwai, Y., Washida, K., Sasaki, Y., Wear 255 (2003) 573-578
Ma, W.L., Lu, J.J., Trib. Lett. 41 (2011) 363-370
Rohatgi, P.K., Liu, Y., Yin, M., Barr, T.L., Mater. Sci. Eng. A 2 (1990) 213-218
Rajkumar, K., Aravindan, S., Tribol. International 4 (2011) 347-358