Hostname: page-component-586b7cd67f-tf8b9 Total loading time: 0 Render date: 2024-11-26T10:10:57.561Z Has data issue: false hasContentIssue false
  • English
  • Français

Synthesis of functional porous metallic material from metallic glass composites precursor by powder metallurgy route

Published online by Cambridge University Press:  13 March 2012

J.S. Kim ,
M.H. Lee ,
D.H. Kim ,
U. Kühn  and
J. Eckert
J.S. Kim
Affiliation:
Korea Institute of Industrial Technology, Incheon 406-840, Korea. e-mail: [email protected] Center for Noncrystalline Materials, Yonsei University, Seoul 120-749, Korea
M.H. Lee
Affiliation:
Korea Institute of Industrial Technology, Incheon 406-840, Korea. e-mail: [email protected]
D.H. Kim
Affiliation:
Center for Noncrystalline Materials, Yonsei University, Seoul 120-749, Korea
U. Kühn
Affiliation:
IFW Dresden, Institute for Complex Materials, P.O. Box 27 01 16, 01171, Dresden, Germany
J. Eckert
Affiliation:
IFW Dresden, Institute for Complex Materials, P.O. Box 27 01 16, 01171, Dresden, Germany
Get access

Abstract

Bulk metallic glasses foams are under consideration as highly functional material, such as energy absorbers or ultra-lightweight parts, due to their porous structure combined with desirable strengths at relatively low densities. Also, the characteristics of high surface area of foams synthesized from metallic glasses make them viable candidates as emerging materials such as high-sensitivity sensors, catalysts or hydrogen storage media. In current study, bulk metallic glass foams were fabricated by extruding powder mixtures comprised of metallic glasses blended with various kinds of fugitive phases followed by dissolution of the fugitive phases in an aqueous chemical solution, for example HNO3, to yield the final porous structure. As a result of dissolution process, porous metallic glass having uniformly distributed micro-scale porosity was fabricated using a sequential synthesis technique beginning with composite particles comprised of composites of MG and a fugitive phase followed by consolidation of the composite powders via warm extrusion.

Keywords

Foamcompositemetallic glasssurface areaextrusion
Type
Research Article
Information
Metallurgical Research & Technology , Volume 109 , Issue 1 , 2012 , pp. 11 - 16
Copyright
© EDP Sciences 2012

Access options

Get access to the full version of this content by using one of the access options below. (Log in options will check for institutional or personal access. Content may require purchase if you do not have access.)

References

Bruck, H.A., Christman, T., Rosakis, A.J., Johnson, W.L., Scr. Metall. Mater. 30 (1994) 429
Conner, R.D., Rosakis, A.J., Johnson, W.L., Owen, D.M., Scr. Mater. 37 (1997) 1373
Gilbert, C.J., Ritchie, R.O., Johnson, W.L., Appl. Phys. Lett. 71 (1997) 476
Ma, M.Z., Liu, R.P., Xiao, Y., Lou, D.C., Liu, L., Wang, Q., K.Wang, W., Mater. Sci. Eng. A 386 (2004) 326
Jayaraj, J., Sordelet, D.J., Kim, D.H., Kim, Y.C., Fleury, E., Corros. Sci. 48 (2006) 950
Park, E.S., Lim, H.K., Kim, W.T., Kim, D.H., J. Non-Crys Solids 298 (2002) 15
Lee, M.H., Bae, D.H., Kim, D.H., Sordelet, D.J., J. Mater. Res. 18 (2003) 2101
Bae, D.H., Lee, M.H., Kim, D.H., Sordelet, D.J., Appl. Phys. Lett. 83 (2003) 2312
Kim, T.S., Chae, H.J., Lee, J.K., Jung, H.G., Kim, Y.D., Bae, J.C., Mater. Sci. For. 534-536 (2007) 793
Sordelet, D.J., Besser, M.F., Mater. Sci. Eng. A375 (2004) 625
Brunauer, S., Emmett, P.H., Teller, E., J. Am. Chem. Soc. 60 (1938) 309
Lee, M.H., Sordelet, D.J., Scripta Mater. 55 (2006) 947
A.W. Adamson, Physical Chemistry of Surfaces, 2nd ed.; Interscience Publishers: New York, 1967, pp. 584-588