Hostname: page-component-cd9895bd7-dk4vv Total loading time: 0 Render date: 2024-12-23T15:15:26.481Z Has data issue: false hasContentIssue false
  • English
  • Français

Examination of nozzle clogging in continuouscasting

Published online by Cambridge University Press:  18 July 2012

B. Harcsik ,
P. Tardy  and
G. Karoly
B. Harcsik
Affiliation:
Institute of Metallurgy and Foundry Engineering, University of Miskolc, Hungary. e-mail: [email protected]
P. Tardy
Affiliation:
Association of the Hungarian Steel Industry, Hungary
G. Karoly
Affiliation:
Institute of Metallurgy and Foundry Engineering, University of Miskolc, Hungary. e-mail: [email protected]
Get access

Abstract

Formation of deposits inside the submerged entry nozzles used in continuous casting ofespecially low-silicon Al-killed mild steels may often cause nozzle clogging and castingdisorder. Technological experience has shown that the application of Ca-treatment beforecasting usually eliminates this phenomenon. In order to understand deposit formation andthe way it can be avoided, we have carried out detailed mineralogical analyses of thedeposits formed on the inner and outer surfaces of the nozzles by different techniques.Results obtained from deposits formed during the casting of only Al-killed andsubsequently Ca-treated steels show that the results obtained from deposits formed duringthe casting of only Al-killed and subsequently Ca-treated steels show that the aluminainclusions carried to the wall of the nozzle form the matrix of the dangerous deposits.Application of Ca-treatment resulted in mostly liquid aluminates compounds and almostnegligible deposit formation. The outer surface of the nozzles however showed similardeposit formation because of possible reoxidation of dissolved aluminium.

Keywords

Continuous castinginclusionscloggingcalcium treatmentaluminates
Type
Research Article
Information
Metallurgical Research & Technology , Volume 109 , Issue 3 , 2012 , pp. 177 - 186
Copyright
© EDP Sciences 2012

Access options

Get access to the full version of this content by using one of the access options below. (Log in options will check for institutional or personal access. Content may require purchase if you do not have access.)

References

L.A. Frank, Castability, From Alumina to Spinels, Iron and Steelmaker April, 1999, pp. 33-39
K.G. Rackers, B.G. Thomas, Clogging in Continuous Casting Nozzles, 78th Steelmaking Conference Proceedings, 1995, pp. 723-734
Cicutti, C.E., Madías, J., González, J.C., Ironmaking and Steelmaking 24 (1997) 155-159
M.J. Heesom, Physical and chemical aspects of nozzle blockage during continuous casting, Calcium Treatment Symposium, Glasgow, 1988, pp. 69-81
W. Tiekink, R. Boom, A. Overbosch, J. Landskroon, B. Deo, Initial stages of alumina formation, VII, Clean Steel Conference, Balatonszéplak, Hungary, 2007 CD-ROM
F. Pellicani, B. Durand, A. Gueussier, Guidelines for calcium treatment of steel and state of calcium retained, Calcium Treatment Symposium, Glasgow, 1988, pp. 15-22
Y.E. Guozhu, P. Jonsson, T. Lund, Thermodynamics and Kinetics of the Modification of Al2O3 Inclusions, ISIJ International, Vol. 36, Supplement, 1996, pp. S105-S108
Sardar, M.K., Mukhopadhyay, S., Bandopadhyay, U.K., Dhua, S.K., Steel Res. Int. 2 (2007) 136-140
Slag atlas, Verein Deutscher Eisenhüttenleute, Verlag Sthahleisen M.B.H. – Düsseldorf, 1981. pp. 28