Crossref Citations
This article has been cited by the following publications. This list is generated based on data provided by Crossref.
Kaushik, P.
Pielet, H.
and
Yin, H.
2009.
Inclusion characterisation – tool for measurement of steel cleanliness and process control: Part 2.
Ironmaking & Steelmaking,
Vol. 36,
Issue. 8,
p.
572.
Kaushik, P.
Pielet, H.
and
Yin, H.
2009.
Inclusion characterisation – tool for measurement of steel cleanliness and process control: Part 1.
Ironmaking & Steelmaking,
Vol. 36,
Issue. 8,
p.
561.
Lyons, C.
and
Kaushik, P.
2011.
Inclusion Characterization of Titanium Stabilized Ultra Low Carbon Steels: Impact of Oxygen Activity before Deoxidation.
steel research international,
Vol. 82,
Issue. 12,
p.
1394.
Kaushik, P.
Lehmann, J.
and
Nadif, M.
2012.
State of the Art in Control of Inclusions, Their Characterization, and Future Requirements.
Metallurgical and Materials Transactions B,
Vol. 43,
Issue. 4,
p.
710.
Sharma, Mukesh
Dabkowska, Hanna A.
and
Dogan, Neslihan
2019.
Application of Optical Floating Zone Method to Dissolution Kinetics of Inclusions in a Steelmaking Slag.
steel research international,
Vol. 90,
Issue. 1,
Lee, Joo-Hyeok
Kang, Myeong-Hun
Kim, Sung-Kwang
Kim, Janghoon
Kim, Min-Su
and
Kang, Youn-Bae
2019.
Influence of Al/Ti Ratio in Ti-ULC Steel and Refractory Components of Submerged Entry Nozzle on Formation of Clogging Deposits.
ISIJ International,
Vol. 59,
Issue. 5,
p.
749.
Dorrer, Philipp
Michelic, Susanne K.
Bernhard, Christian
Penz, Alexander
and
Rössler, Roman
2019.
Study on the Influence of FeTi‐Addition on the Inclusion Population in Ti‐Stabilized ULC Steels and Its Consequences for SEN‐Clogging.
steel research international,
Vol. 90,
Issue. 7,
Lee, Joo-Hyeok
and
Kang, Youn-Bae
2020.
Growth of Initial Clog Deposits during Continuous Casting of Ti-ULC Steel – Formation and Reduction of the Initial Deposits at Nozzle/Steel Interface.
ISIJ International,
Vol. 60,
Issue. 3,
p.
426.
Lee, Joo-Hyeok
Kim, Janghoon
Kang, Myeong-Hun
Kim, Seong-Yeon
and
Kang, Youn-Bae
2022.
Effect of Trace of Oxygen in Ar Gas on Initial Growth of Nozzle Clogging Deposits on SEN for Ti Added Ultra‐Low C Steel Casting.
steel research international,
Vol. 93,
Issue. 10,
Michelic, Susanne K.
and
Bernhard, Christian
2022.
Significance of Nonmetallic Inclusions for the Clogging Phenomenon in Continuous Casting of Steel––A Review.
steel research international,
Vol. 93,
Issue. 7,
Liu, Fenggang
Zhou, Qiuyue
Zhang, Lifeng
and
Ren, Ying
2022.
12th International Symposium on High-Temperature Metallurgical Processing.
p.
315.
Thiele, Kathrin
Presoly, Peter
Ernst, Daniel
Babu, Shashank Ramesh
and
Michelic, Susanne K.
2023.
Evaluation of different alloying concepts to trace non-metallic inclusions by adding rare earths on a laboratory scale.
Ironmaking & Steelmaking,
Vol. 50,
Issue. 5,
p.
507.
Truschner, Christoph
Thiele, Kathrin
Ilie, Sergiu
Rössler, Roman
Jungreithmeier, Alfred
and
Michelic, Susanne K.
2023.
Tracing of Deoxidation Products in Ti‐Stabilized Interstitial Free Steels by La and Ce on an Industrial and Laboratory Scale.
steel research international,
Thiele, Kathrin
Truschner, Christoph
Walkner, Christoph
Meisel, Thomas C.
Ilie, Sergiu
Rössler, Roman
and
Michelic, Susanne K.
2024.
Investigating the Origin of Non-Metallic Inclusions in Ti-Stabilized ULC Steels Using Different Tracing Techniques.
Metals,
Vol. 14,
Issue. 1,
p.
103.
Yan, Xiong
Wang, Wanlin
Zhou, Lejun
Zhong, Xiaocan
Lin, Hongliang
Liu, Xiaokang
Zeng, Sibao
and
Zhang, Liwu
2024.
Investigation of Mold Flux Entrapment in Deep Oscillation Mark of Interstitial-Free Steel Shell Using Mold Simulator.
Materials,
Vol. 17,
Issue. 6,
p.
1435.