Hostname: page-component-586b7cd67f-t7czq Total loading time: 0 Render date: 2024-11-24T21:30:33.716Z Has data issue: false hasContentIssue false
  • English
  • Français

Modélisation de la propagation des fissures courtes en fatiguedans le cas du 316L

Published online by Cambridge University Press:  24 December 2010

Reda Yahiaoui  and
Bachir Ait Saadi
Get access

Abstract

L’expérience a démontré que la fissure fatale n’est pas nécessairement la plus granderelevée à un moment donné de la fatigue d’un matériau et qu’elle peut être la résultanted’autres microfissures. Ainsi, le dommage (par fatigue) est souvent associé audéveloppement et à la croissance de microfissures en surface. L’avantage de considérer unepopulation de fissures comme facteur physique d’endommagement est que les longueurs defissures et leur nombre sont des données quantifiables qui peuvent être mesurées ensurface du matériau. La présente étude est conduite dans ce sens et vise à caractériserl’endommagement et son évolution par la mesure de la densité de fissures en surface. Unmodèle numérique, basé sur des principes aléatoires de génération de fissures, de leurpropagation et de leur interaction mutuelle, est proposé. Il est ensuite appliqué dans lecas du 316L à température ambiante et pour des déformations plastiques égales à8 × 10-3, 4 × 10-3 et 8 × 10-4.

Keywords

Fatiguefissures courtesdurée de viedensité de fissurescoalescence316LFatigueshort cracksfatigue lifetimecrack densitycoalescence316L
Type
Research Article
Information
Mechanics & Industry , Volume 11 , Issue 5 , September 2010 , pp. 379 - 384
Copyright
© AFM, EDP Sciences 2010

Access options

Get access to the full version of this content by using one of the access options below. (Log in options will check for institutional or personal access. Content may require purchase if you do not have access.)

References

Références

Goto, M., Statistical investigation of the behaviour of small cracks and fatigue life in carbon steels with different ferrite grain sizes, Fatigue Fract. Eng. Mater. Struct. 17 (1994) 635–649 CrossRefGoogle Scholar
Kimura, H., Akiniwa, Y., Tanaka, K., Tahara, Y., Ishikawa, T., Fatigue Crack Initiation Behavior in Ultrafine-Grained Steel Observed by AFM and EBSP, JSME Int. J. Ser. A 47 (2004) 331–340 CrossRefGoogle Scholar
Elmalki Alaoui, A., Thevenet, D., Zeghloul, A., Experimental investigations on the growth of small fatigue cracks in naval steel, Fatigue Fract. Eng. Mater. Struct. 30 (2007) 489–498 CrossRefGoogle Scholar
Hong, Y., Zheng, L., Qiao, Y., Simulation and experiments of stochastic characteristics for collective short fatigue cracks in steels, Fatigue Fract. Eng. Mater. Struct. 25 (2002) 459–466 Google Scholar
Qiao, Y., Effects of randomness of grain boundary resistance on fatigue initiation life, Int. J. Fatigue 27 (2005) 1251–1254 CrossRefGoogle Scholar
Suh, C.M., Lee, J.J. and Kang, G., Fatigue microcraks in type 304 stainless steel at elevated temperature, Fatigue Fract. Eng. Struct. 13 (1990) 487–496 CrossRefGoogle Scholar
Obrtlik, K., Polak, J., Hajek, M., Vasek, A., Short fatigue crack behaviour in 316L stainless steel, Int. J. Fatigue 19 (1997) 471–475 CrossRefGoogle Scholar
Beretta, S., Clerici, P., Microcrack propagation and microstructural parameters of fatigue damage, Fatigue Fract. Eng. Mater. Struct. 19 (1996) 1107–1115 CrossRefGoogle Scholar
Rodopoulos, C.A., de los Rios, E.R., Theoretical analysis of the behaviour of short fatigue cracks, Int. J. Fatigue 24 (2002) 719–724 CrossRefGoogle Scholar
Yamamoto, M., Kitamura, T., Effect of microstructure on crack propagation in high-temperature fatigue of directionally solidified Ni-based superalloy, Fatigue Fract. Eng. Mater. Struct. 29 (2006) 431–439 CrossRefGoogle Scholar
Zhai, T., Jiang, X.P., Li, J.X., Garatt, M.D., Bray, G.H., The grain boundary geometry for optimum resistance to growth of short fatigue cracks in high strength Al-alloys, Int. J. Fatigue 27 (2005) 1202–1209 CrossRefGoogle Scholar
Gao, Y., Stolken, J.S., Kumar, M., Ritchie, R.O., High-cycle fatigue of nickel-base superalloy René 104 (ME3): Interaction of microstructurally small cracks with grain boundaries of known character, Acta Materialia 55 (2007) 3155–3167 CrossRefGoogle Scholar
Murakami, Y., Miller, K.J., What is fatigue damage? A view point from the observation of low cycle fatigue process, Int. J. Fatigue 27 (2005) 991–1005 CrossRefGoogle Scholar
Hong, Y., Zheng, L., Qiao, Y., Simulation and experiments of stochastic characteristics for collective short fatigue cracks in steels, Fatigue Fract. Eng. Mater. Struct. 25 (2002) 459–466 Google Scholar
Yasniy, P.V., Hlado, V.B., Hutsaylyuk, V.B., Vuherer, T., Microcrack initiation and growth in heat-resistant 15Kh2MFA steel under cyclic deformation, Fatigue Fract. Eng. Mater. Struct. 28 (2005) 391–397 CrossRefGoogle Scholar
Beloucif, A., Stolarz, J., Low cycle fatigue of zircaloy-4, Proceeding of the sixth international fatigue congress, Berlin Germany, Fatigue’96 (1996) 277-282 Google Scholar
Suh, C.M., Lee, J.J., Kang, Y.G., Ahn, H.J., Woo, B.C., A simulation of the fatigue crack process in type 304 stainless steel at 538 °C, Fatigue Fract. Eng. Mater. Struct. 15 (1992) 671–684 CrossRefGoogle Scholar
Magnin, T., Ramade, C., Low-cycle fatigue damage mechanisms of f.c.c and b.c.c polycrystals homologous behaviour, Mater. Sci. Eng. A 118 (1989) 41–51 CrossRefGoogle Scholar
A. Bataille, T. Magnin, K.J. Miller, Numerical simulation of surface fatigue microcracking processes, Mechanical Engineering Publications, London, 1992, pp. 407–419
V.C. Jesper, Structural evolution and mechanisms of fatigue in polycristalline brass, Thèse de Doctorat, Technical University of Denmark, 1998
Kitagawa, H., Takahashi, S., Suh, C.M., Miyahita, S, Quantitative analysis of fatigue process-microcracks and slip lines under cyclic strains, ASTM-STP 675 (1978) 420–439 Google Scholar
A. Bataille, Modélisation numérique de l’endommagement physique en fatigue – cas de l’acier 316L et d’un acier ferrito-perlitique, Thèse de Doctorat, Univ. de Lille, 1992
Magnin, T., Coudreuse, L., Lardon, J.M., A quantitative approach to fatigue damage evolution in FCC and BCC stainless steels, Scripta metallurgica 19 (1985) 1487–1490 CrossRefGoogle Scholar
Sarfarazi, M., A micromechanical model of microcracking for brittle polycristalline solids, Eng. Fract. Mech. 32 (1989) 1–20 CrossRefGoogle Scholar
Qiao, Y., Chakravfarthula, S.S., Effects of randomness of grain boundary resistance on fatigue initiation life, Int. J. Fatigue 27 (2005) 1251–1254 CrossRefGoogle Scholar
Lankford, J., The influence of microstructure on the growth of small fatigue cracks, Fat. Fract. Eng. Mater. Struct. 8 (1985) 161–175 CrossRefGoogle Scholar
Tokaji, K., Ogawa, T., Harada, Y., The growth of small fatigue cracks in a low carbon steel; The effect of microstructure and limitations of linear elastic fracture mechanics, Fatigue Fract. Eng. Mater. Struct. 9 (1986) 205–217 CrossRefGoogle Scholar
Wang, Y.Z., Atkinson, J.D., Akid, R., Parkins, R.N., Crack interaction, coalescence and mixed mode fracture mechanics, Fatigue Fract. Eng. Mater. Struct. 19 (1996) 427–439 CrossRefGoogle Scholar
Ochi, Y., Ishii, A., Sasaki, K., An experimental and statistical investigation of surface fatigue crack initiation and growth, Fatigue Fract. Eng. Mater. Struct. 4 (1985) 327–339CrossRefGoogle Scholar