Article contents
Effects of thermal boundary conditions, surface radiation andaspect ratio on thermal performance in “T” shallow cavity
Published online by Cambridge University Press: 21 November 2014
Abstract
The main objective of this article is to study the effect of 2D coupled mode freeconvection with surface radiation on the fluid flow behavior in an air filled partitionedand shallow cavity subjected to isothermal or insulated boundary conditions. Thedimensionless governing equations under Boussinesq approximation are coupled with aradiative model through the boundaries conditions and solved by the finite volume method.The numerical results are discussed in terms of streamlines, isotherms, convective andradiative Nusselt numbers along the cover plate for various aspect ratios (a, b and c), emissivities andRayleigh number. These results highlighted the condition of the enclosure performance andrevealed among other that isothermal boundaries induce better convective heat exchangecompared to adiabatic cases. Also, it is noticed that varying aspect ratio(a) causesstrong influence on both Nusselt numbers compared to the aspect ratios (b) and (c). The increase of(ϵo) raisesNuconvand decreases Nuradslightly. Whereas, an increase of (ϵC) leads to minorchanges in Nuradwhen (b) or(c) vary,this effect becomes appreciable with increasing (a).
- Type
- Research Article
- Information
- Copyright
- © AFM, EDP Sciences 2014
References
- 5
- Cited by