Hostname: page-component-586b7cd67f-2plfb Total loading time: 0 Render date: 2024-11-25T18:13:59.721Z Has data issue: false hasContentIssue false
  • English
  • Français

A study about energy consumption and cutting fluid usedto clutch case machining

Published online by Cambridge University Press:  13 October 2011

Henri-François Boyer ,
Jeremy Waremme ,
Jean-Luc Bourdiol  and
David Delaunay
Henri-François Boyer*
Affiliation:
Renault SA, Direction de l’Ingénierie Mécanique, 67 rue des Bons Raisins, 92508 Rueil-Malmaison Cedex, France Laboratoire Procédés et Ingénieries en Mécanique et Matériaux, Arts et Métiers ParisTech, 151 Bd de l’Hôpital, 75013 Paris, France
Jeremy Waremme
Affiliation:
École Nationale Supérieure de Mécanique et des Microtechniques (ENSMM), 26 chemin de l’Épitaphe, 25030 Besançon Cedex, France
Jean-Luc Bourdiol
Affiliation:
COMAU France, ZI de Mélou, rue de l’Industrie, 81100 Castres, France
David Delaunay
Affiliation:
Renault SA, Département Ingénierie Process Cléon, Usine de Cléon, BP 105, 76410 Cléon, France
*
a Corresponding author : [email protected]
Get access

Abstract

This paper deals with a balance of energy and cutting fluid consumption used to manufacture an aluminum clutch case (AlSi9Cu3(Fe)) in industrial context. To establish this balance sheet constitutes the first stage of a reflection aiming at reducing the economic and ecological impact of the production of mechanical parts. Indeed, before intending to set up new technologies susceptible to reduce the cost of manufacturing of a part it is necessary to draw up an inventory of fixtures of the current situation. This paper brings to light the energy and environmental cost connected to the use of cutting fluids in machining. It establishes a prerequisite in the studies necessary for the implementation of a new technology (the minimum quantity lubrication or MQL) and in the characterization of this technology in comparison with the existing (wet machining). This study joins within the framework of a project supported by the “agence de l’environnement et de la matrise de l’énergie” (ADEME, France).

Keywords

Wet machiningenergyenvironmentminimum quantity lubricationMQLUsinage avec arrosageénergieenvironnementmicro lubrificationMQL
Type
Research Article
Information
Mechanics & Industry , Volume 12 , Issue 5 , 2011 , pp. 389 - 393
Copyright
© AFM, EDP Sciences 2011

Access options

Get access to the full version of this content by using one of the access options below. (Log in options will check for institutional or personal access. Content may require purchase if you do not have access.)

References

B. Broquerie, Fluides de coupe : Rle en usinage et classification, Techniques de l’ingnieur, Gnie mcanique (2001) BT1, BM7064 BM7064.1-BM7064.13
W. Zielasko, M Zimmermann, Machining with MQL: what users expect from machine tool manufacturer 2004
Weinert, K., Inasaki, I., Sutherland, J.W., Waka-bayashi, T., Dry machining and minimum quantity lubrication, CIRP Annals-Manufacturing Technology 53 (2004) 511–537 CrossRefGoogle Scholar
Lahres, M., Muller-Hummel, P., Doerfel, O., Applicability of different hard coatings in dry milling aluminum alloys, Surface and Coatings Technology 91 (1997) 116–121 CrossRefGoogle Scholar
Suda, S., Yokota, H., Inasaki, I., Wakabayashi, T., A synthetic ester as an optimal cutting fluid for minimal quantity lubrication machining, CIRP Annals-Manufacturing Technology 51 (2002) 95–98 CrossRefGoogle Scholar