Hostname: page-component-cd9895bd7-mkpzs Total loading time: 0 Render date: 2024-12-23T07:07:42.359Z Has data issue: false hasContentIssue false
  • English
  • Français

Enhancement of flow boiling heat transfer in microchannels bynano- and micro-surface treatments

Published online by Cambridge University Press:  20 July 2011

Hai Trieu Phan ,
Nadia Caney ,
Philippe Marty ,
Stéphane Colasson  and
Jérôme Gavillet
Hai Trieu Phan*
Affiliation:
UniversitéJoseph Fourier, LEGI, BP 53, 38041 Grenoble Cedex 9, France LITEN/LETH, CEA Grenoble, 17 rue des martyrs, 38054 Grenoble Cedex 9, France
Nadia Caney
Affiliation:
UniversitéJoseph Fourier, LEGI, BP 53, 38041 Grenoble Cedex 9, France
Philippe Marty
Affiliation:
UniversitéJoseph Fourier, LEGI, BP 53, 38041 Grenoble Cedex 9, France
Stéphane Colasson
Affiliation:
LITEN/LETH, CEA Grenoble, 17 rue des martyrs, 38054 Grenoble Cedex 9, France
Jérôme Gavillet
Affiliation:
LITEN/LTS, CEA Grenoble, 17 rue des martyrs, 38054 Grenoble Cedex 9, France
*
a Corresponding author:[email protected]
Get access

Abstract

This paper investigates the flow boiling heat transfer in microchannels with the aim ofdeveloping compact cooling systems which can be adapted to miniaturized power components.Nano- and micro-surface treatments were used as innovative techniques to improve the heattransfer performance as well as to delay the intermittent dryout. It was observed that themicro-structured surfaces show significant enhancements (up to 85%) in heat transfercompared to the smooth surfaces. Especially, using the highly-wetted structured surface,the intermittent dryout is improved.

Keywords

Contact angleconvective boilingmicrochannelmicro-patterningnanocoatingAngle de contactébullition convectivemicrocanalmicro-stucturationnano-structuration
Type
Research Article
Information
Mechanics & Industry , Volume 12 , Issue 3: CFM 2011 , 2011 , pp. 151 - 155
Copyright
© AFM, EDP Sciences 2011

Access options

Get access to the full version of this content by using one of the access options below. (Log in options will check for institutional or personal access. Content may require purchase if you do not have access.)

References

Références

Kew, P., Cornwell, K., Correlations for the prediction of boiling heat transfer in small-diameter channels, Appl. Therm. Eng. 17 (1997) 705–715 CrossRefGoogle Scholar
Kandlikar, S.G., Grande, W.J., Evolution of microchannel flow passages-thermohydraulic performance and fabrication technology, Heat Trans. Eng. 25 (2003) 3–17 CrossRefGoogle Scholar
N. Caney, J. Bigot, P. Marty, Experimental flow boiling study in mini-channel, 13th Int. Heat Transfer Conference, 2006, Sydney, Australia
Madrid, F., Caney, N., Marty, P., Study of a vertical boiling flow in rectangular mini-channels, Heat Trans. Eng. 28 (2007) 753–760 CrossRefGoogle Scholar
R. Ali, B. Palm, M.H. Maqbool, Flow boiling heat transfer characteristics of a minichannel up to dryout condition, 2d Micro/Nanoscale Int. Heat & Mass Trans. Conf. 2009, Shanghai, China
Thome, J.R., Boiling in microchannels: a review of experiment and theory, Int. J. Heat Fluid Flow 25 (2004) 128–139 CrossRefGoogle Scholar
Phan, H.T., Caney, N., Marty, P., Colasson, S., Gavillet, J., Surface wettability controlled by nanocoating: The effects on pool boiling heat transfer and nucleation mechanism, I. J. Heat Mass Trans. 52 (2009) 5459–5471 CrossRefGoogle Scholar