Hostname: page-component-586b7cd67f-dlnhk Total loading time: 0 Render date: 2024-11-23T02:09:04.332Z Has data issue: false hasContentIssue false

Express method of estimating laser-induced surface damage threshold for optical components

Published online by Cambridge University Press:  05 August 2002

V.S. SIRAZETDINOV
Affiliation:
Research Institute for Complex Testing of Optoelectronic Devices, 188540, Sosnovy Bor, Leningrad region, Russia
V.N. ALEKSEEV
Affiliation:
Research Institute for Complex Testing of Optoelectronic Devices, 188540, Sosnovy Bor, Leningrad region, Russia
D.I. DMITRIEV
Affiliation:
Research Institute for Complex Testing of Optoelectronic Devices, 188540, Sosnovy Bor, Leningrad region, Russia
A.V. CHARUKHCHEV
Affiliation:
Research Institute for Complex Testing of Optoelectronic Devices, 188540, Sosnovy Bor, Leningrad region, Russia
V.N. CHERNOV
Affiliation:
Research Institute for Complex Testing of Optoelectronic Devices, 188540, Sosnovy Bor, Leningrad region, Russia
V.N. KOTILEV
Affiliation:
Research Institute for Complex Testing of Optoelectronic Devices, 188540, Sosnovy Bor, Leningrad region, Russia
V.I. LIBER
Affiliation:
Research Institute for Complex Testing of Optoelectronic Devices, 188540, Sosnovy Bor, Leningrad region, Russia
N.N. RUKAVISHNIKOV
Affiliation:
Russian Federal Nuclear Center, 607190, Sarov, Nizhni Novgorod region, Russia

Abstract

The present measurements of the components' surface resistance to laser-induced damage has been completed to facilitate development and construction of the “Luch” laser system, a four-channel Nd-phosphate glass laser with a full output energy of E = 14–16 kJ. The study describes a method that, with a series of experimental data obtained from a single sample, allows us not only to estimate the threshold fluences, but to take into account the statistical nature of the surface damage. In a number of experimental situations this method makes it possible to estimate damaging fluences even from the result of a single exposure of the studied surface. Estimated threshold fluences for various optical elements are presented: K8 glass, experimental phosphate laser glass KGSS-0180, high-reflecting and antireflecting thin-film coating of elements. The 1.054-μm radiation pulse with half-height duration of 4 ns and the irradiation spot of ∼4 mm in diameter were used in the experiment.

Type
Research Article
Copyright
© 2002 Cambridge University Press

Access options

Get access to the full version of this content by using one of the access options below. (Log in options will check for institutional or personal access. Content may require purchase if you do not have access.)