In this study, an inverse Real Time Kinematic (RTK) GPS positioning approach is presented and discussed. GPS data from a remote receiver mounted on an unmanned vehicle is sent to the base station to determine the vehicle location at the centimetre level of accuracy in real time. Control of the vehicle's movement and manoeuvring can thus take place at the base station, which could be a few kilometres away, and the vehicle can be sent to specific locations to do certain tasks. Two GPS antennas were used in order to increase positioning reliability and estimate real time heading and pitch of the vehicle for better control. In addition, the vehicle was fitted with cameras with wireless video transmission to provide the operator with a good level of vision in different directions during operation. The main applications of such a system would be in exploration, breaching and clearance of minefields, and hazardous situations such as fire fighting of burning oil wells. The system design and techniques employed are discussed first. Issues addressed include antenna layout, data transmission, solution algorithm, and ambiguity resolution. The proposed system was mounted on a prototype vehicle and tested under different satellite visibility conditions. Results show that high positioning accuracy with reliable ambiguity resolution can be obtained with the developed approach if the number of observed satellites is 5 or more and PDOP is less than 5. Heading and pitch were determined within 0·2–0·3 degree using a 1·2 m long baseline. This performance can be improved as the length of the on-board baseline increases.