Article contents
Indoor Global Localisation in Anchor-based Systems using Audio Signals
Published online by Cambridge University Press: 16 February 2016
Abstract
This paper presents a method that allows mobile devices to be globally self-localised in indoor localisation systems by transmitting to them data from position reference anchors. The objective is to establish a reliable one-way down-link communication through signals used in the localisation process in a typically strong fading and multipath channel environment. This is accomplished by using signal processing techniques, including coding and forward error correction, to transmit data using a specific transmission control protocol. Experimental results, using audio as the signal between anchors and the mobile device, demonstrate successful data transmission in realistic scenarios like a common noisy and reverberant room. Spread spectrum noise-like masked signals 4·9 dB below background noise were sufficient to attain correct data reception at four metres distance between a loudspeaker anchor and a mobile device's microphone.
- Type
- Research Article
- Information
- Copyright
- Copyright © The Royal Institute of Navigation 2016
References
- 3
- Cited by