Hostname: page-component-586b7cd67f-gb8f7 Total loading time: 0 Render date: 2024-11-26T07:14:03.422Z Has data issue: false hasContentIssue false

GNSS IF Signal Simulation Considering Oscillator Phase Noise – ERRATUM

Published online by Cambridge University Press:  09 March 2018

Rights & Permissions [Opens in a new window]

Abstract

Type
Erratum
Copyright
Copyright © The Royal Institute of Navigation 2018 

The Editor and Publishers regret that the following typographical errors have been made to Xu and Dou (Reference Xu and Dou2018), and the corrections below should be considered when reading the paper.

Table 3: Replace caption with: “Table 3. Measured ADEVs for B n = 10 Hz and percentage errors.”

Page 9: Third line from the bottom replace “B n − 1 kHz” with “B n = 1 kHz”.

Table 4: Replace caption with: “Table 4. Measured ADEVs for B n = 1 kHz and percentage errors.”

Table 5: Replace caption with: “Table 5. Filtered ADEVs for B n = 1 kHz and percentage errors.”

Equation (15) (Page 11): Replace with the following equation:

$$\sigma_A = \displaystyle{{180}\over{\pi}} \sqrt{2\pi^2 {f_{RF}}^2 \left(\displaystyle{{\pi^2 h_{-2}}\over{\sqrt{2} \omega_L^3}} + \displaystyle{{\pi h_{-1}}\over{4\omega_L^2}} + \displaystyle{{h_0}\over{4\sqrt{2}\omega_L}}\right)} \lpar \hbox{degree}\rpar$$

References

REFERENCE

Xu, B. and Dou, L. GNSS IF Signal Simulation Considering Oscillator Phase Noise. The Journal of Navigation, Published by Cambridge University Press, 5 February 2018. doi:10.1017/S0373463318000036.Google Scholar