Hostname: page-component-586b7cd67f-t7fkt Total loading time: 0 Render date: 2024-11-29T18:02:49.641Z Has data issue: false hasContentIssue false
  • English
  • Français

Controlled (h/d) Flight Path System for use during Climb and Descent

Published online by Cambridge University Press:  18 January 2010

R. D. Ryan
R. D. Ryan
Affiliation:
(Division of Radiophysics, C.S.I.R.O., Australia)
Get access Rights & Permissions [Opens in a new window]

Abstract

An attachment giving a number of accurate straight or curved climb or descent flight paths has been developed for use with the Australian-designed airborne distance measuring equipment (DME). The electrical output from a special altimeter is converted into a time delay which increases with altitude. In the DME distance is measured, fundamentally, in terms of a similar time delay. The h/d flight path is defined by keeping these two delays equal as the aircraft climbs or descends. The ILS glide slope meter is used as the pilot's path indicator. Nominal slopes from 1° to 6° may be selected. In terms of height, deviations from the path of ± 250 ft. produce full-scale deflections on the meter, while the maximum error is ± 1000 ft.

Type
Research Article
Information
The Journal of Navigation , Volume 14 , Issue 2 , April 1961 , pp. 195 - 201
Copyright
Copyright © The Royal Institute of Navigation 1961

Access options

Get access to the full version of this content by using one of the access options below. (Log in options will check for institutional or personal access. Content may require purchase if you do not have access.)

References

REFERENCES

1Downes, J. G. (1949). Controlled (h/d) let-down using barometric height and radar distance. This Journal, 2, 43.CrossRefGoogle Scholar
2 Giannini and Co. (1956). Altimeter model 451212-AL. Specification S451212.02 9th April.Google Scholar
3Fraser, D. O. (1958). Doppler and Civil Aviation. This Journal, 11, 142.CrossRefGoogle Scholar
4Zeising, D. and McRae, J. (1959). Investigation into aircraft climbing rates for the purpose of simplifying ATC operations, Australian D.C.A. report.Google Scholar
5Ryan, R. D., Hall, R. and Tonkin, F. G. (1960). A transistor DME airborne set, C.S.I.R.O. Radiophysics Lab. Report RPR 138. Submitted for publication in the Proc. Inst. Radio Engrs. (Aust).Google Scholar
6Wilson, A. J. (Circa 1957). H/D climb and descent system, Australian D.C.A. report.Google Scholar
7Hughes, Kelvin (1959). Force-balance system of pressure measurement; Publication KH 047 T.Google Scholar