Hostname: page-component-cd9895bd7-dk4vv Total loading time: 0 Render date: 2024-12-23T20:29:19.019Z Has data issue: false hasContentIssue false
  • English
  • Français

Structural Responses of Surfac-Mounted Piezoelectric Curved Beams

Published online by Cambridge University Press:  28 September 2011

R.-T. Wang
R.-T. Wang*
Affiliation:
Department of Engineering Science, National Cheng Kung University, Tainan, Taiwan70101, R.O.C.
*
* Professor, corresponding author
Get access

Abstract

The formulation of one Timoshenko curved beam on which a pair of piezoelectric segments bonded is presented. The analytical-transfer matrix method is adopted to study structural responses of the surface-mounted actuation curved beam induced by an external force at the tip of the beam and by an applied voltage on the actuator. The effects of length, location and thickness of the piezoelectric pair on the structural responses of the entire curved beam are investigated.

Keywords

Curved beamPiezoelectric segmentsStructural responses
Type
Research Article
Information
Journal of Mechanics , Volume 26 , Issue 4 , December 2010 , pp. 439 - 451
Copyright
Copyright © The Society of Theoretical and Applied Mechanics, R.O.C. 2010

Access options

Get access to the full version of this content by using one of the access options below. (Log in options will check for institutional or personal access. Content may require purchase if you do not have access.)

References

REFERENCES

1. Crawley, E. F. and de Luis, J. “Use of Piezoelectric Actuators as Elements of Intelligent Structures,” American Institute of Aeronautics and Astronautics Journal, 25, pp. 1373–1384 (1987).Google Scholar
2. Zhang, X. D. and Sun, C. T., “Formulation of an Adaptive Sandwich Beam,” Smart Materials and Structures, 5, pp. 814–823 (1996).Google Scholar
3. Wang, R. T., “Structural Responses of Surface-Mounted Piezoelectric Beams,” Journal of Mechanics, 26, pp. 337–349 (2010).Google Scholar
4. Volterra, E. and Gaines, J. H., Advanced Strength of Materials. New Jersey, Prentice-Hall Inc. (1971).Google Scholar
5. Rao, S. S., “Effects of Transverse Shear and Rotatory Inertia on the Coupled Twist-Bending Vibrations of Circular Rings,” Journal of Sound and Vibration, 16, pp. 551–566 (1971).CrossRefGoogle Scholar
6. Wang, R. T. and Sang, L., “Out-of-plane Vibration of Multi-Span Curved Beam due to Moving Loads,” Structural Engineering and Mechanics, An International Journal, 7, pp. 361–375 (1999).Google Scholar
7. Shih, H.-R., “Distributed Vibration Sensing and Control of a Piezoelectric Laminated Curved Beam,” Smart Materials and Structures, 9, pp. 761–766 (2000).Google Scholar
8. Ryu, D. H. and Wang, K. W., “Analysis of Interfacial Stress and Actuation Authorities Induced by Surface-Bonded Piezoelectric Actuators on Curved Flexible Beams,” Smart Materials and Structures, 13, pp. 753–761 (2004).CrossRefGoogle Scholar
9. Sun, Dongchang and Tong, Liyong, “Modeling Analysis of Curved Beams with Debonded Piezoelectric Sensor/Actuator Pathches,” International Journal of Mechanical Sciences, 44, pp. 1755–1777 (2002).CrossRefGoogle Scholar
10. Kuang, Y.-D., Lig, G.-Q., Chen, C.-Y. and Min, Qii, “The Static Responses and Displacement Control of Circular Curved Beams with Piezoelectric Actuators,” Smart Materials and Structures, 16, pp. 1016–1024 (2007).CrossRefGoogle Scholar
11. Wang, R.-T., “Vibration of a T-type Curved Frame due to a Moving Force,” Journal of Sound and Vibration, 215, pp. 143–165 (1998).CrossRefGoogle Scholar
12. Tiersten, H. F., Linear Piezoelectric Plate Vibrations, New York, Plenum Press (1969).Google Scholar
13. Mehrdad, N. G.-N., Saeid, P., Mark, U. and Ali, Y., “Finite Element Method for Active Vibration Suppression of Smart Composite Structures Using Piezoelectric Materials,” Journal of Thermoplastic Composite Materials, 19, pp. 310–352 (2006).Google Scholar